Cart
← Back to Product Catalog

Lucky Tone – Dante DSP 0404

I/O Interfaces

More details

Similar Products

ABX-6-Vorderseite
  • Fohhn

Fohhn – ABX-6

The ABX-6 Dante breakout box can be equipped with up to two 1000Base-X fiber transceivers (SFP module). That allows for redundant applications via fiber optical cable. Additionally, it has two 1000Base-T ethernet connections. Thus, ABX-6 supports a convenient connection to Focus Venue, Focus Modular or DI Amplifiers over long distances.

Main features

  • SFP ports for 1000Base-X fiber transceiver (Dante Primary und Secondary)
  • 1000Base-T Ethernet connections (Dante Primary und Secondary)
  • Up to eight audio channels: 2 × AES/EBU, 2 × Airea connect
  • Fohhn Net control signals are transmitted over ethernet
  • Integrated Dante Brooklyn II module
    I/O Interfaces
See the product
ru-nl2_400px|ru-nl2_400px
  • RDL

RDL – RU-NL2

The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced line level that corresponds to a network digital audio level of -18 dBFS. LED audio signal indicators are provided. Model RU- NL2P operates from PoE. The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced professional line level. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. Crosstalk is below the noise floor between the outputs across the entire audio spectrum. The RU-NL2 is also available in a PoE version (RU-NL2P). If PoE power and an external 24 Vdc supply are both feeding an RU-NL2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product
amphenol-amphe-dante-RJD1212-0500_600px
  • Amphenol

Amphenol – Amphe-Dante RJD1212-0050

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and two AX series XLR analogue outputs in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and two AX series XLR analogue outputs in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.
    I/O Interfaces
See the product