Dante-enabled Product Catalog

MA-1000TD is a multi-function network DSP digital High-Z and low-Z power amplifier 2*500W@4Ω, 2*300W@8Ω, bridged 1000W@8Ω, low-Z 100V-1000W@10Ω. It can remotely monitor the status of power amplifier, set compression Controller, limiter, noise gate, parametric equalization, matrix routing, delay and other DSP functions in real time. Simple software interface provides customers with simple setup and operation experience, and a variety of connection methods ensure its good configurability and expandability, suitable for various applications, such as performance center, theatre, gallery, hotel, conference center, shopping center, retail store, restaurant, etc.

> It is compact and can be installed near to an analog signal source or receiver easily.
> In order to ensure the need of amplification for the build-in electric microphone, high index DC power is adopted by this device.
> The gain is +10dB-+50dB(XLR),Line level is -10dB-+40dB.
> Phantom power +48v in each channel to supply power for the electric mic.
> The maximal output level of the 4 line is +22dB, which meets the requirements of consumer and professional audio application, without overloading.

MA-120TD, MA-240TD, MA-350TD, MA-500TD

> Priority:EMC >MIC1>MIC2, MIC3, AUX1, AUX2.
> 4 microphone and 2 auxiliary inputs.
> 1 Dante Audio and 1 DSP control inputs.
> 100V and 4-16 Ohms rear panel switchable speaker outputs.
> Automatic mute function for paging and announcements.
> Individual input gain controls with master volume control.
> Mp3/TUNER/Bluetooth module with screen display.
> 24VDC backup power supply.
> Standard 1U 19 inch size with detachable mounting ears.
> Speaker output short circuit protection.

> CAT5/6 connector to link with Dante network and controlled by Audinate;
> Small size integrated mounting bracket which can be installed in very limited space;
> Adopt advanced V5.0 Bluetooth technology;
> Simple to pair Bluetooth by pressing a button;
> Compatible with a variety of mobile phones, tablets, computers and other devices;
> With RCA and 3.5mm TRS stereo input, TRS priority;
> With one 3.5mm TRS stereo output;
> Support PoE power supply;
> Integrated power supply and audio transmission in one body;
> With Bluetooth call bridge function for conference purposes.
> Convert 1 Bluetooth Audio signal to 2 Dante network audio channel;
> Convert 1 aux or 3.5 jack stereo to 2 Dante network audio channel.
> Receiving Dante network audio signal via local 3.5 jack.

Dante PoE Speaker can realize its multifunction of the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

DP 180POE DSP Speaker can realize its multifunction the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. DP 180POE DSP adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality realizes on
this compact speaker of low power design. The system built with plastic body and 6pcs 3 inch high efficient Neodymium driver. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. DP 180POE DSP integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control.

Dante PoE Speaker can realize its multifunction of the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

Dante DSP 0404 Transmitter is designed for Dante network audio transmission and routing transfer of high quality and low latency network audio transmissionin multimedia systems.

DSP 0404 has analog channels of 4 balance input and 4 balance output. It can also provide phantom power for your microphone, as well as mute and gain adjustment on PC controlling software.

Features:

1. PoE power supply & DC12V power supply
2. Built-in Dante module
3. 4 balance input + 4 balance output
4. 48V phantom power supply
5. Windows software included

Dante Panel series wall-mounted interface machines boast analog input and Dante digital input, analog line output and Dante digital output. The analog inputs support phantom power and manual preamp-gain adjustment. It is suitable for conference rooms and other professional applications. It available in black and white color.

DMIC Dante Microphone is a microphone with a built-in Dante module supporting POE power supply. It can be directly connected to the Dante network, providing you a rewarding experience with extremely low latency, high fidelity and a low cost solution for paging and announcement.

Features:

Built-in Dante module
Rotate gain control
POE power supply
Smart on/off switch

Dante DP3 PoE Speaker is equipped with POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power from any Ethernet switch of 802.3 or above standard. Dante DP3 adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality on this compact speaker of low power design. The system is built with a plastic body and 4pcs 3 inch high efficient Neodymium driver. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. Dante DP3 integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control. All these functions can perform remotely on the PC or Mac by DS Controller Software.

Features:

1. Built-in Dante module
2. Built-in power amplifier module and system efficiency > 70%
3. DSP controlling software
4. PoE power supply
5. Over-current protection, Thermal protection and Overload protection

Dante DP PoE Speaker is multifunctional with either POE power supply or 2 4VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

DMIC Dante Microphone is a type of microphone that with built-in Dante module supporting POE power supply. It can be directly connected to the Dante network, providing you a rewarding experience that a extremely low latency, high fidelity and low cost solution for paging and announcement.

Lucky Tone's Dante DP 430 is a 30W Dante Wall Speaker with DPS, POE or External 24V DC power supply for outdoor and half outdoor applications. Lucky Tone's Dante DP 430 DP PoE Speaker can realize its multifunction the POE power supply or 2 4VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz)and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

Lucky Tone's Dante DP 830R is an 8-inch 30W Coaxial Rimless Ceiling speaker with 24VDC or POE power supply and DSP. Lucky Tone's Dante DP 830R PoE Speaker can realize its multifunction the POE power supply or 24VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

Lucky Tone's DANTE WP 630 is a Dante 6-inch Wall speaker with built-in 2x30W amplifier, POE power supply and DSP, possible working with a passive speaker as PAIR. Lucky Tone's DANTE WP 630 6-inch wall speaker can realize its multifunction the POE power supply or 24VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Ethernet that transmits 24-bit audio (44.1K/48KHz) with its control signal can be routed through the Dante Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.