Cart
← Back to Product Catalog

Quicklink – TX Quad – High Availability

I/O Interfaces

More details

Similar Products

symetrix-xIn-4_1200px|symetrix-xIn-4_1200px
  • Symetrix

Symetrix – xIn 4

The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel.  The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power), along with bus assignments, are configured using Symetrix Composer open architecture software. xIn 4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xIn 4 may be surface mounted. Features
  • Audio input (A/D) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring overall system
  • costs down.
  • 4 mic/line inputs, including +48 VDC phantom power, with the industry leading performance specifications of Edge and Radius.
  • Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
  • Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
  • Rack mount and surface mount kits sold separately.
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product
VE66DTH_Photo
  • ATEN

ATEN – VE66DTH

ATEN VE66DTH is a Dante-enabled six−input/six−output Audio Interface with HDMI. Using Dante™ – the most popular audio networking solution created by Audinate, the VE66DTH is capable of delivering uncompressed, close-to-zero latency digital audio signals across your standard IP network. Key features include:

  • Features Dante™ networked audio interface – a complete audio networking solution that distributes uncompressed, multi-channel audio transmission via standard Ethernet networks, with near-zero latency and perfect synchronization
  • Integrates up to 6-channel balanced mono audio Line/Mic input signals onto a Dante-enabled audio system and supports both dynamic and condenser microphones
  • Delivers up to 6-channel balanced mono audio Line outputs from the Dante network to the audio system
  • Supports HDMI 2.0 input with HDCP 2.2 compliant & HDMI 2.0 local output
    I/O Interfaces
See the product
pnaid081a
  • Profitt

Profitt – PN-AID-081

Blocks are designed for:

connecting analog or digital AES3 audio signals to sound studios and audio mixers using the AES67 or Dante protocol;

transmission of audio signals over Ethernet 100/1000 BaseT;

performing the function of an 8x8 audio switch and creating a distributed network of switches with a common switching field, limited network bandwidth (one audio channel takes about 1 Mbps).

Supports up to 16 channels of balanced analog audio (8 inputs and 8 outputs) or up to 8 channels of AES 3

digital audio (4 inputs and 4 outputs). The type of audio signals (' xxxx ') for inputs and outputs is selected by the user in the device code independently of each other. The first pair of ' xx ' defines the input signals and the second pair of ' xx ' the output signals (' A ' indicates 2 analog stereo signals; ' E ' indicates 2 AES digital signals ). An additional Ethernet port provides connection to a redundant ( Redundant )) audio transmission networks or device cascading. Management and monitoring is carried out over an Ethernet network using a proprietary program Dante Controller . HDB44 audio connectors.

    I/O Interfaces
See the product