Cart
← Back to Product Catalog

BARE – DT-1

I/O Interfaces

More details

Similar Products

extron-axi22at_0|extron-axi22at_0
  • Extron Electronics

Extron – AXI 22 AT

The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. It features two mic or line inputs on a 3.5 mm captive screw connector, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 22 AT also features two line level outputs for routing any two Dante channels from the network to the audio system. The AXI 22 AT interfaces with any Dante-equipped audio processor,  and can be powered through PoE.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
See the product
micromedia-dio-xlr-dc
  • Micromedia

Micromedia – Digimedia DIO XLR DC

Digimedia DIO XLR DC is a professional high-end studio-grade 2 channel Dante™ interface with digital AES-3 XLR input and output. Input has high quality SRC with typical SN 144dB. There is Dante Domain Manager and AES67 support build in. Interface needs 12V or external PoE (Power over Ethernet) splitter. Two professional high quality Neutrik XLR audio connectors. Digimedia DIO XLR DC is a professional high-end studio-grade 2 channel Dante™ interface with digital AES-3 XLR input and output. Input has high quality SRC with typical SN 144dB. There is Dante Domain Manager and AES67 support build in. Interface needs 12V or external PoE (Power over Ethernet) splitter. Two professional high quality Neutrik XLR audio connectors.
    I/O Interfaces
See the product
clockaudio-cdt-100_600px
  • Clockaudio

Clockaudio – CDT 100

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol. By taking advantage of the advanced Dante technology and based on the high performance and pre-configurable hardware platform, this product transfers audio and control signals via widely used Ethernet and is able to guarantee perfect sound quality. The CDT 100 has a variety of uses including but not limited to boardrooms, conference rooms, video conference rooms and any place else where multiple table microphones and control devices are connected back to the AV equipment cabinet. Features
  • Easy to install with under table mounting
  • Audio and control signals transported over Dante
  • 4 audio inputs, multiple units may be daisy chained (maximum of 6 units on a single CAT-5)
  • Provides Phantom Power for each mic input
  • 4 control inputs compatible with all Clockaudio devices including:
    • direct connection to CH32 LItetouch switch & LED, TS001, Retracta CRM202S-RF, CS-S Series, SM80S, S80S
    • direct connection to ARM-C controller
  • Open API for interfacing with Control Systems
  • Compatible with any Dante capable audio DSP
    I/O Interfaces
  • Dante Ch: 2x4
  • 24-bit
See the product