Cart
← Back to Product Catalog

BARE – BR-10V4

I/O Interfaces

More details

Similar Products

TASCAM_-_MM-4D-IN-E
  • TASCAM

TASCAM – MM-4D/IN-E

Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. The MM-4D/IN-E is a compact converter that converts 4-channel mic/line input signals into Dante signals. With half the size of a standard 1U rack, the MM-4D/IN-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-4D/IN-E supports up to 96kHz/24bit and uses Euroblock connectors for analog mic/line input.  
    I/O Interfaces
  • Dante Ch: 4x4
  • 16-bit, 24-bit
See the product
symetrix-xOut-12_1200px|symetrix-xOut-12_1200px
  • Symetrix

Symetrix – xOut 12

The cost effective xOut 12 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Edge and Radius DSP units, each of the twelve analog outputs’ parameters (gain and mute), along with bus assignments, are configured using SymNet Composer open architecture software. xOut 12 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set.
    I/O Interfaces
  • Dante Ch: 64x0
  • 24-bit
See the product
dad-dx32r-front
  • DAD

DAD – DX32R

DX32R is your versatile digital audio Swiss knife - an interface and matrix designed for multiple audio applications such as multi-room recording studios, post-production facilities and audio distribution installations. It allows you to route all digital input and output and manage them on a mono channel basis within a single unit or a combination of units.

With near zero latency, the DX32R can be used to expand I/O channel count and interface digital components, providing a high quality bridge between AES/EBU, MADI and the Dante IP audio network.

DX32R include a 384x384 multiplexer, enabling all digital inputs and outputs to be routed in any combination; this enables the unit to also split signals for advanced signal distribution.

The DX32R IP Audio protocol is based on the robust tried-and-tested Dante™ digital audio network technology, and will interoperate with products of other brands that comply with Dante.

The protocol is compliant with the AES67 standard for AoIP. The Dante and NTP IP Audio formats provide fast, flexible, and economical audio routing via IP and are compatible with the AX32 AD/DA converter, and other Dante devices. The IP Audio routing provides low latency, tightly synchronized, transport of uncompressed audio over Gigabit IP Ethernet Layer 3 networks using off the shelf switches, and routers for audio routing via one or more sub-nets.

A total of 512 channels can be routed on a 1 Gigabit network, and more if the network capacity is higher.

DX32R is TCP/IP controlled via one of the two Ethernet ports vi the DADman Control software available for both Windows and OSX.

The routing of the IP audio via Dante is done by using the Audinate Dante controller software.

    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product