Dante-enabled Product Catalog

MNS-DANTE-I2S-TR-XX-1P DANTE I2S AUDIO RECEIVE / TRANSMIT MODULE [ Dante to I2S and I2S to Dante ], Which can be easy integrated into your products. Create a unique selling proposition and differentiate your product with rapid and flexible customization.
[Model:MNS-DANTE-I2S-R-02-1P]: For networked audio receiver products requiring 2 channels at 44.1 kHz, 48kHz, 88.2kHz and 96kHz [ 16, 24 or 32-bit ] sample rates.

The Model 5422A is suitable for use in fixed and mobile broadcast facilities, post-production studios, commercial and educational theater environments, and entertainment applications. Only power and Ethernet network connections are required for the Model 5422A to provide a powerful resource in a variety of Dante applications. The Model 5422A is available in two versions – one with 32 input and output channels and the other with 64 input and output channels.
• Dante audio-over-IP technology with AES67 and DDM support
• Creates multiple virtual party-line (PL) intercom circuits
• Special audio functions including summing, IFB, and audio switching
• Auto Mix for enhanced audio performance
• Perfect for REMI/At-Home production applications
• Two versions available: one or two 32-channel audio engines
• Three Gigabit Ethernet interfaces support independent redundant Dante and management networks
• Webpage management and USB flash drive software updating
• AC mains and 12 volts DC powering
• Lightweight enclosure, single rack-space (1U) mounting

The Model 5402 provides the PTP v1 (IEEE 1588-2002) compatibility required by Dante. Supports PTP v2 (IEEE 1588-2008) for AES67 applications. Includes an integrated GNSS (satellite) receiver to allow a precise timing reference to be acquired from the four major constellations. A sync input connection allows the Model 5402's internal oscillator to be synchronized with a variety of external timing and reference signals. A word clock output provides a general-purpose timing reference for use by external devices.
Key Features
• Integral GNSS (satellite) receiver for nanosecond-level timing accuracy
• Supports GPS (USA), Galileo (Europe), BeiDou (China), and GLONASS (Russia)
• Dedicated Leader clock for Dante audio-over-IP, AES67, ST 2110, and DDM applications
• High-performance IEEE 1588 PTP v1 and v2 servers
• Allows synchronization of audio between multiple sites
• Word clock output with selectable rates
• Eight configurable audio tone signals
• Three Gigabit Ethernet interfaces support independent redundant Dante and management networks
• Webpage management and USB flash drive software updating

The Model 5401A provides the PTP v1 (IEEE 1588-2002) compatibility that's required by Dante. In addition, the unit supports PTP v2 (IEEE 1588-2008) for AES67 applications. A word clock output provides a general-purpose timing reference for use by external devices. The Model 5401A also generates eight sine-wave audio tones on Dante transmitter (output) channels which can be useful during audio network installation, maintenance, and operation. A sync input connection allows the Model 5401A's internal oscillator to be synchronized with a variety of timing and reference signals.

Key Features
• Dedicated Leader clock for Dante audio-over-IP and AES67 applications
• High-performance IEEE 1588 PTP v1 and v2 servers
• Internal temperature-stabilized frequency reference
• Compatible with external word clock, video sync, and 10 MHz sources
• Word clock output with selectable rates
• Eight configurable audio tone signals
• Three Gigabit Ethernet interfaces support independent Dante and management networks
• Webpage management and USB flash drive software updating

Dual MADI Interface

- 2 x MADI I/Ontp-penta-720-io-cards-madi-2
- 2 x 64 channels
- 8 cards = 1024 channels
- Built-in Sample Rate Converter on input
- Choice of physical interface
- Select type of SFP module
- Optical, MM or SM
- Coax
- Redundant mode
- Auto switch-over in case of signal loss

128 ch. Dante/AES67 Interface

- 128 Channels in and out ntp-penta-720-io-cards-128-dante-2
- 8 cards = 1024 channels
- Built-in Sample Rate Converter
- Enables connection between unsynchronised
- Dante/AES67 networks
- Enables connection between networks with different sample rates
- Support for Dante Domain Manager
- Support for AES67 with SAP
- Network delay setting up to 21 msec
-128 full streams of Dante connectivity

Dual SDI Embedder/De-Embedder

- 2 x SDI Embedder/de-embedder
- 16 channels pr. SDI
- 8 cards = 16 SDI Embedder/de-embedder
- Supports SD, HD and 3G SDI
- Built-in Sample Rate Converter
- Routing of single channels

AES Interface Card

8 x AES I/O
- 16 channels in and out
- 8 cards = 128 channels in and out
- Built-in Sample Rate Converter on input
- Sample rates from 44.1 to 192 kHz

DA interface card for module series

Analog Output

- 8 ch. LINE output
- Selectable max. Output level
- +9 dBu to +24 dBu in steps of 0.1 dB

Analog Input
Two card types (Cards are physically identical). LINE card can be upgraded to MIC/LINE by license.

8 ch. LINE input
8 ch. MIC/LINE input – Features…
Phantom power
Mic pre gain
Phase invert
Selectable max. line input level
+9 dBu to +30 dBu in steps of 0.1 dBLong Product Description (150 words or less): AD conversion for the DAD and Penta module product lines.

The options card adds Dante connectivity to our module systems, though the Pentas 721s includes this Dante module are standard feature.

Dante/AES67 Module

- 64 ch. Dante interface
- Support for AES67 with SAP
- Support for Dante Domain Manager
- Network delay setting up to 41 msec.

Penta - Audio Delay Processor
SPQ Card serves different functions for DAD Ax32, Penta 720 and 721s, based on different software:

The programmable delay for up to 128 ch.
Individual delay pr. channel
128 ‘channel-seconds of delay’
128 ch. can be delayed up to 1 sec.
1 ch. Can be delayed up to 128 sec.
Or any combination in-between
Delay can be set in steps of 1 sample
Suitable to achieve lipsync

You can add a wide variety of optional I/O cards to the modular Penta 721s and Penta 720. Once you start mixing and matching up to 8 card slots, you will find that the system is extremely flexible and therefore may be tailored to fit any audio-routing and/or conversion task imaginable.

ModularDual MADI Module
2 x MADI I/O
2 x 64 channels
Choice of physical interface
Select type of SFP module
Optical, MM or SM
Coax
Redundant mode
Auto switch-over in case of signal loss
Can operate as dual HotLink
2 x 128 ch.

In a world that seems to be gradually moving towards working and mixing 'in the box', there are still situations where hands-on control is second to none.

Monitor control is one of those cases. Enter MOM - our Monitor Operating Module.

MOM is the perfect, tactile match for one or more AVID MTRX, AVID MTRX Studio, AX32, DX32, Penta 720, and Penta 721s units equipped with the PRO|MON|3 monitor control license. The MOM is a remote control, connected via Ethernet, and no audio is actually passing through the unit. The audio-routing magic happens within the AX32 or DX32R and is set up via the DADman software. But once you connect the MOM, the magic now resides right at your fingertips. Main Features:
MOM will give you everything you would expect from a first-grade hardware monitor-controller:

Large Top-Quailty Rotary Knob
Switching Between Different Sources
Switching Between Different Monitor Configurations (from Mono to Atmos)
Mute/Solo Individual Monitor Channels
Talkback
Dim
Cut
Reference Level

Next-Generation Enterprise, Modular Router and Interface System'

Key Features
8 AES/EBU I/O and 1-3 MADI I/O
8 card slots for analog and digital I/O cards supporting hot-swop
IP audio L3 Ethernet I/O powered by Dante
TCP/IP control via NTP Router Control System and Stand alone control applications for PC
Single or Dual power supply
Key Benefits
Analogue and Digital audio interfacing
Each of the 8 expansion slots can be independent or combined domain properties. Allowing separate sample rate, clock sources and IP Submask independence.
Interfacing and routing of embedded audio in video SDI SD/HD/3G signals
Flexible patching and routing of digital audio signals providing
Stand alone IP audio interface and format converter
Interface for NTP TDM router systems
Low latency, tightly synchronised, transport of uncompressed audio over IP networks using off the shelf switches

The PENTA 721s has 1 large user-configurable slot for one of the seven optional I/O cards including a 128 ch Dante interface. There is a slot for the optional Dual MADI Module labeled Optical I/O and includes as standard a Dante/AES67 Interface using the two Ethernet ports on the rear.

The large slot can be configured with any one of the seven available analog and digital cards, in addition to the digital interfaces provided on the base unit. Check out the features of each of the available Penta I/O cards here. Signal Routing
PENTA 721s include a 512×512 multiplexer, enabling all analog and digital inputs and outputs to be routed in any combination; this enables the unit to also split signals for advanced signal distribution. The multiplexer can be used to establish the static connections of the signal inputs and outputs, and furthermore, it incorporates soft switching with a fade down and fade up the functionality of the signal level. Soft switching ensures that setting or changing a signal path can be made without any audible click or artifact.

2 x 60 Watt Commercial Amplifier with Direct Drive Technology, Dante Networking, DDM Ready and Energy Star Certification. Delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations. Provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. FAD602 is easy to install and operate – even for non-technical personnel. Simply put, the FAD602 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.
It also consumes less mains power than competing models, this amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.

2 x 240 Watt Commercial Amplifier with Direct Drive Technology, Dante Networking, DDM Ready and Energy Star Certification. Delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations. Provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. FAD2402 is easy to install and operate – even for non-technical personnel. Simply put, the FAD2402 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.
It also consumes less mains power than competing models, this amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.

Energy Star Certified, Dante inputs, DDM ready and 2x120 Watt amplifier with Direct Drive Technology delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations. Provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. FAD1202 is easy to install and operate – even for non-technical personnel. Simply put, the FAD1202 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system. It also consumes less mains power than competing models, this amazing technology makes it possible to design and build powerful amplifier systems that not only save money on the electrical bill, but also reduce the requirements and cost at the installation for the mains supply. In fact, it is likely that installation can be done utilizing the in-place mains infrastructure. This adds up to significant installation and operational savings and protects the environment.

Equipped with Dante technology, the ZeeVee ZyPerUHD encoder will enable users to route any audio source within a ZyPerUHD deployment to a Dante network. Dante audio over IP includes support for features such as “human” readable names for all connected devices, automatic device discovery, one-click routing and low deterministic latency. In addition, it provides stable performance and enables automatic reconnection of system components after power cycles.

Dante Audio Networked Enabled Speaker System

Eagles series audio interfaces are a Dante compatible networked audio technology device. They provide an economic solution for distributed audio via standard Ethernet switch and CAT5/CAT E6 cabling. They are PoE (power over ethernet) compatible, but can also be powered locally. They are available in 4input x 4output, all inputs/outputs can be set to either mic or line level.

Eagles series audio interfaces are a Dante compatible networked audio technology device. They provide an economic solution for distributed audio via standard Ethernet switch and CAT5/CAT E6 cabling. They are PoE (power over ethernet) compatible, but can also be powered locally. They are available in 4input x 4output, all inputs/outputs can be set to either mic or line level.

Eagles series audio interfaces are a Dante compatible networked audio technology device. They provide an economic solution for distributed audio via standard Ethernet switch and CAT5/CAT E6 cabling. They are PoE (power over ethernet) compatible, but can also be powered locally. They are available in 4input x 4output, all inputs/outputs can be set to either mic or line level.

• 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

• 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

• I2S digital audio format

• Freely set the sampling rate and equipment name

• Network audio transmission and control use standard Category 5 network cable (CAT5) by 2*RJ45

• Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

IF02_E2 is converted module with Dante audio in and analog audio out(balanced) , including single RJ45 and double RJ45, which can easily integrate power amplifier and active speaker into Dante audio network.

*E2 double network interface

*2 channel Dante network digital input, 2 channel analog output

*DC supply:±12V、+5V, +5V maximum operating current：400mA

*sample frequency 24bit-48k/96 

*support PCM16、PCM24、PCM32 kinds of code

PA2310-D2 is a DSP class-D amplifier module used in active speakers. Based on DSP signal processing technology, network technology, class-D amplifier and switching power supply technology. Configured with 2-channel Dante input interface to easily integrate into Dante network audio system. 

* 2*500W4Ω+ 1*1000W8Ω

*DSP process module: DA24CL/D

*support 180-265VAC input

*IPS colorful display

*Connect by 2*RJ45 of network or USB free-driver