Product Information
[Model:MNS-DANTE-I2S-T-02-1P]: For networked audio transmitter products requiring 2 channels at 44.1 kHz, 48kHz, 88.2kHz and 96kHz [ 16, 24 or 32-bit ] sample rates.
MONISMS – Dante I2S Module card MNS-DANTE-I2S-T-02-1P
Similar Products
- Blustream
Blustream – DA11ABL-WP-EU
The DA11ABL-WP is a multi-input / output wall plate to convert Bluetooth and analogue audio within a digital Dante® networked audio system.
The DA11ABL-WP converts 2 x input channels of Bluetooth, or unbalanced audio to Dante® digital audio, and 2 x channels of Dante® audio to 2 x output channels of unbalanced audio. Software configuration for the DA11ABL-WP allows for the Bluetooth name to be amended as required where being deployed in multi-user spaces.
The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for Decora backbox compatibility. The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.
- I/O Interfaces
- Dante Ch: 2x2
- 16-bit, 24-bit, 32-bit
- TASCAM
TASCAM – MM-4D/IN-E
Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene.
Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene.
The MM-4D/IN-E is a compact converter that converts 4-channel mic/line input signals into Dante signals. With half the size of a standard 1U rack, the MM-4D/IN-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-4D/IN-E supports up to 96kHz/24bit and uses Euroblock connectors for analog mic/line input.
- I/O Interfaces
- Dante Ch: 4x4
- 16-bit, 24-bit
- AudioPressBox
AudioPressBox – APB-D200 R-D
APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths.
APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths. It can provide a hardware master clock for a Dante network. As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure APB-Dante devices connected to the Dante network. Device names, channel labels, signal routing and other parameters (for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.
APB-Dante products use Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.
- I/O Interfaces