Smart pi – Smart pi NAM


More details

Similar Products

5D3_8701
  • Hosteex

Hosteex – DAN-AMP-2CH

- Maximum supports 35.5Wx2@8Ω or PBTL mode for 71W@4Ω
- Built in Audio DSP for Volume, PEQ, Filter and Input Gain controls
- Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier
- DAN-AMP-2ch - Config Tool software to configure audio DSP
- Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection
- Supports Dante™ Domain Manger and AES67 compliant

    Amplifiers
stewart-audio-mc850
  • Stewart Audio

Stewart Audio – MC850-LZ-D

The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support. The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support. The MC850 family embodies the future of smart amplification with networked audio inputs, Ethernet configuration, control and reporting and flexible power allocation between channels. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.       
  • 8 independent Dante™ inputs
  • Primary and Secondary Dante™ ports (redundant or switched)
  • Ethernet port for control and reporting
  • RS-232 control
  • Power sharing up to 125W per channel
  • Compact 1RU enclosure
  • Made in USA
    Amplifiers
NAM-603_600px
  • DELEC

DELEC – unito NAM 603

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The NAM 602/603 transfers the audio from the Dante audio network right to the speakers and, therefore, is the ideal monitoring tool for a multitude of applications. Designed for either indoor or outdoor use, the NAM 602/603 carries an IP66 rating that ensures solid performance under the most challenging conditions. This unit incorporates dual 1GB Ethernet ports (2 x RJ45), four outputs that deliver 12W RMS at 4, 8 or 16 Ohms or, alternatively, two outputs delivering 24W RMS at 8 or 16 Ohms, AES/EBU input and output capability, plus a microphone input. Like the NAM 203, this higher capacity model also provides Delay and Gain, as well as FIR and IIF filters on each channel. The unit is powered by an external power supply. Also noteworthy, the NAM 603 offers redundant audio sources for power amp inputs when used in combination with other DELEC Dante enabled products.
  • Direct monitoring in Dante audio networks
  • Integrated power amplification
  • Simple configuration via web interface
    Amplifiers