Cart
← Back to Product Catalog

Biamp – NPX G1100

Intercoms

More details

Similar Products

glensound-beatrice-r8_700px|glensound-beatrice-r8_700px
  • Glensound

Glensound – Beatrice R8

The Glensound BEATRICE R8 is a versatile high-end intercom units with 8 channels. This device offers a perfectly clear sound, ideal for professional audiovisual, theatrical and audio applications. The Glensound BEATRICE R8 is a versatile high-end intercom units with 8 channels. This device offers a perfectly clear sound, ideal for professional audiovisual, theatrical and audio applications. Like the entire BEATRICE range, the R8 uses the Dante network audio transmission protocol, whose reliability and performance are widely recognized by audio professionals. Thus, the distribution of uncompressed audio signals is real-time on standard networks . The R8 also complies with the AES67 protocol, making it fully compatible with other third-party devices. The BEATRICE R8 is designed to be very simple to use for the operator and easy to configure for the technician. They have all the basic functionality required for small intercom systems and do not require any of the complex installation requirements normally associated with large systems. Features:
  • 8 intercom channels
  • Dante and AES67 compatible
  • Front-gradeHP
  • 48kHz digital audio signal perfectly clear
  • PoE / Power supply
  • Low noise microphone amplifier
  • 1RU format
    Intercoms
See the product
Beatrice_B4_Plus_Angle
  • Glensound

Glensound – Beatrice B4+

The Beatrice B4+ is Glensound's first Broadway design unit, with 4 x FW & 4 x IFBs to the Dante/AES67 Network. The B4+ can interfacewith 4 completely separate network locations.

The deisgn of the B4+ is ultra compact to make the unit as unobtrusive to the operator as possible.

The microphone input is on a 3 pin XLR and features gain adjust and 48V phantom power. The XLR connector can be specified with 4 or 5 pins for headset connections.

Four separate talk buttons route the microphone input to either of the 4 network outputs. The button operation can be configured as momentary, latching or intelligent. A double tap on any of the talk buttons will produce a 'call' signal alert that will be received by another Beatrice unit. An LED indicates an incoming call alert, which will also produce an audio indication on the headphones.

Each input has a separate level control adjust and a signal present indicator.

    Intercoms
See the product
oratis-talk-16-dante_600px
  • DELEC

DELEC – oratis Talk 16 Dante

The DELEC Talk 16 Dante is a 16-key rackmount subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. The DELEC Talk 16 Dante is a 16-key rackmount subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. These units can be hooked up to any DELEC intercom unit equipped with a Dante interface, e.g. CS 1624.  These new subscriber panel models allow operators to target specific addresses or – using DELEC NAMs – announcement speakers. All three models come with Dante Primary and Secondary ports for fully redundant operation. In a different scenario, these two ports can be used to daisy-chain several subscriber panels, reducing cabling requirements dramatically. As a result, these new subscriber panels are not only perfect for broadcast and theatre environments but also for any application which requires long cable runs.
    Intercoms
See the product