Dante-enabled Product Catalog

The AVN-M8R multi-channel Dante interface is a 19” 1U rack-mount unit which distributes 8 balanced mic/line inputs to 8 channels of Dante/AES67 on the AoIP network. Each mic/line input can be controlled remotely via a web server, with settings including, mic preamp gain and switchable phantom power. A typical application might be to distribute up-to 8 separate balanced mic and/or line feeds onto an AoIP system and routed via Dante Controller to other nodes on the network. The front panel includes clear LED indicators for power (PoE), network status and clock synchronisation, along with dedicated LEDs for secondary port link and PoE monitoring. On the rear 8 XLR balanced Neutrik connectors provide the professional mic/line interface with phantom power indicators and the unit is powered via PoE for installation savings, reliability and efficiency. Primary and secondary 1Gb ports are offered as standard to provide full power and data redundancy, ensuring an uninterrupted reliable solution in critical environments. The GPIO and VGPIO can be used to trigger events over the network between devices, such a microphone muting and other events.

Expand your Dante networked audio rig with I/O and monitor control. Add personal monitor control with headphone amplifier and line I/O to your Dante® audio network Easily connect synths, amp emulators, external analog gear, and playback devices with Apollo e2m's built-in stereo line inputs Use Power over Ethernet (PoE) and built in mic-stand mount to place Apollo e2m anywhere you need monitoring — on stage or in the studio Pair with Apollo e1x remote-controllable Unison™ preamps and Apollo x16D for a complete I/O solution  

The DANTE  CONNECTSERIES 704D-ADSP is a 4-channel amplifier with 700 watts per channel perfectly suited for high-performance applications. The CS704D-ADSP  boasts impressive features, including 96kHz linear phase FIR crossover filters with 2048 taps per channel, providing precise audio control. Additionally, it offers 4 seconds of input delay and powers on to audio in under 10 seconds when using PoE. The FIR-based speaker tunings further enhance the audio experience, ensuring unparalleled performance and reliability. Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. The DANTE CONNECTSERIES features both analog and Dante inputs, as well as external I/O control for remote on/off and fault monitoring. It also includes compatibility with both Dante and AES67.  

The DANTE CONNECTSERIES 702D-ADSP is a 2-channel amplifier with 700 watts per channel perfectly suited for high-performance applications. The CS702D-ADSP  boasts impressive features, including 96kHz linear phase FIR crossover filters with 2048 taps per channel, providing precise audio control. Additionally, it offers 4 seconds of input delay and powers on to audio in under 10 seconds when using PoE. The FIR-based speaker tunings further enhance the audio experience, ensuring unparalleled performance and reliability. Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. The DANTE CONNECTSERIES features both analog and Dante inputs, as well as external I/O control for remote on/off and fault monitoring. It also includes compatibility with both Dante and AES67.

The DANTE CONNECTSERIES 354D-ADSP is a 4-channel amplifier with 350 watts per channel, perfectly suited for high-performance applications. The CS354D-ADSP boasts impressive features, including 96kHz linear phase FIR crossover filters with 2048 taps per channel, providing precise audio control. Additionally, it offers 4 seconds of input delay and powers on to audio in under 10 seconds when using PoE. The FIR-based speaker tunings further enhance the audio experience, ensuring unparalleled performance and reliability. Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. The DANTE CONNECTSERIES features both analog and Dante inputs, as well as external I/O control for remote on/off and fault monitoring. It also includes compatibility with both Dante and AES67.

The DANTE CONNECTSERIES 352D-ADSP is a 2-channel amplifier with 350 watts per channel, perfectly suited for high-performance applications. The CS352D-ADSP boasts impressive features, including 96kHz linear phase FIR crossover filters with 2048 taps per channel, providing precise audio control. Additionally, it offers 4 seconds of input delay and powers on to audio in under 10 seconds when using PoE. The FIR-based speaker tunings further enhance the audio experience, ensuring unparalleled performance and reliability. Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. The DANTE CONNECTSERIES features both analog and Dante inputs, as well as external I/O control for remote on/off and fault monitoring. It also includes compatibility with both Dante and AES67.

Introducing the CONNECTSERIES 3004, a 4-channel amplifier with 3000 watts per channel. This addition to the CONNECTSERIES  family is available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. As part of the Network CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for large-scale installations. The 3004/3004D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…the Network and Dante CONNECTSERIES are the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud

The CONNECTSERIES 704D is a 4-channel amplifier with 700 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, perfectly suited for small to medium-scale installations. The 704D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.

The CONNECTSERIES 702D is a 2-channel amplifier with 700 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, perfectly suited for small to medium-scale installations. The 702D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.

The CONNECTSERIES 354D is a 4-channel amplifier with 350 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 354D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.

The CONNECTSERIES 352D is a 2-channel amplifier with 350 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 352D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.

The CONNECTSERIES 168D is an 8-channel amplifier with 160 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 168D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.

The CONNECTSERIES 164D is a 4-channel amplifier with 160 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 164D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.

Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud

The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.

The CONNECTSERIES 88D is an 8-channel amplifier with 80 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 88D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.

Then there’s the Cloud…Dante CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud

The Dante CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.

The CXD-32CF 32×32 I/O Digital Audio Network Interface is a 32×32 48kHz I/O device that supports Dante® and AES67. It provides routing and expansion capabilities into and out of a CrewNet infrastructure via EtherCon Copper and Dual LC Fiber connections. This half-rack device can be powered with either net power over a CrewNet copper connection or via the supplied 48VDC power supply (PPS-48V-02).orking in the field. KEY FEATURES:

• 32 x 32 I/O Dante-Based Digital Audio I/O
• Includes an AES67 Operation Mode
• Single EtherCon/Dual LC Fiber CrewNet Port
• Primary and Secondary Redundant EtherCon/Dual LC Fiber Dante Ports
• Supports 48kHz Sampling Frequency
• Front and Rear Panel Status Indicators
• Micro USB Connection for Firmware Updates
• Dual Powering Options
• Network Power (Power over CrewNet)
• External Power (48VDC) (Included with Product)
• Compact 1U Half-Rack Size Chassis Design with Forward or Rear-Facing Orientation (rack kits sold separately)

With UXA4807D, there is no need to search for and download loudspeaker settings.EAW engineering developed loudspeaker settings are selectable from a simple drop-down menu in the WiFi enabled HTML interface or the TCP/IP enabled connection to EAW’s award winning Resolution 2 software. Once the installation is up and running generous amounts of user adjustable DSP are available to fine tune the system response in the venue. Complete more designs in less time with more confidence. There is no guess work in matching EAW amplifiers to EAW loudspeakers. When you refer to the application guide for the correct match and configuration you are guaranteed to get great results for years to come. Key Features:

• 4 inputs & 8 outputs
• Dante Ultimo for 4 channels of audio input
• Pairs seamlessly with EAW Install Engineered Solutions loudspeakers
• S/PDIF linking enables amps to be driven from the same input signal
• Control the amplifier and command large networks with Resolution 2
• Safety and EMC Certified. Compliant to ErP & EnergySTAR

The new Catchbox Hub is the latest innovation within the Catchbox Plus wireless microphone system and was designed to be the central point in education spaces where audio complexity is growing — but budgets and human resources are not. With support for up to four Catchbox wireless mics and up to ten external audio sources over analog, USB and Dante, the Hub mixes, processes and routes audio for in-room amplification, conferencing, recording and assistive listening. The Catchbox Hub eliminates the need for an external DSP, says Catchbox, allowing AV designers to simplify their setup and reduce costs. Key features include the following:

• Separate DSP paths for a smooth in-room and video conferencing audio experience, with smart features like feedback suppression, auto-leveling, echo reduction and more.
• Flexible input options, supporting up to 4 Catchbox wireless microphones, 4 analog sources and 4×4 Dante channels for mixing and processing external sources like third-party mic systems.
• Custom-configurable output mixes for assistive listening, recording and conferencing.
• USB integration for seamless connection with software platforms like Zoom, MS Teams or lecture capture tools.
• Centralized control and monitoring software for campus-wide AV scalability (coming soon).

Bluetooth® Audio Dante Network Interface

• Bluetooth Audio Input for Dante or AES67 Networked System
• Bluetooth Stereo or Mono Sum Feeds Two Network Channels
• Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
• Intuitive Single Button Bluetooth Pairing with LED Status Indication
• Bluetooth Functions are Controllable in RDL CONSOLE Software
• Q-SYS Plug-In Available for Configuring in Q-SYS Environment
• Bluetooth Functions are Controllable using Compatible RDL Remote Controls
• Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
• Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
• Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
• Module is PoE Powered

Put Unison preamps on stage or in your studio with Dante.

• Expand any Dante® network with remote-controlled mic/line preamps using Power over Ethernet (PoE)
• Combine with Apollo x16D interface to get the authentic Unison™ mic preamp sounds of API, Avalon, Manley, Neve, SSL, and more
• Link multiple Apollo e1x units with included coupling bracket and integrated mic-stand mount
• Pair with Apollo e2m stereo headphone amplifier/line interface and Apollo x16D for a complete I/O solution

The XB5 is a USB-C conferencing bridge that enables seamless BYOD (Bring Your Own Device) integration into AV-over-IP environments. The XB5, which will debut at InfoComm 2025, offers true single-cable operation, delivering video, audio, Ethernet and charging through one USB-C connection while integrating natively into Visionary’s 1GbE AV-over-IP ecosystem. Designed for use in conference rooms, boardrooms, classrooms and other professional audiovisual settings, the XB5 allows users to connect their personal laptops directly to the room’s audiovisual system using a single USB-C cable. The XB5 provides bi-directional 4K60 4:4:4 video and high-quality audio, wired Ethernet access and up to 100W of charging power, without requiring any software installation or driver configuration. The XB5 supports industry-standard UVC and UAC protocols for plug-and-play compatibility with Windows, macOS and ChromeOS devices. For AV integrators, the XB5 streamlines system design and deployment. It eliminates the need for separate USB extenders, video switchers and audio interfaces by combining those functions into one compact device. The XB5 is fully compatible with Visionary’s 5-Series endpoints, allowing it to operate within a flexible, scalable AV-over-IP network using standard 1GbE switches. The XB5 support for AES67 and Dante audio, including embedding and de-embedding of AEC-processed audio, makes it easy to integrate with DSPs and networked audio systems. Additionally, the XB5 features PoE+ power and a fanless design, which simplifies installation and reduces points of failure. For end users, the XB5 removes barriers to collaboration. Users can walk into a room, plug in a USB-C cable and instantly start a meeting using their preferred soft codec, such as Zoom, Microsoft Teams, Webex or others. The laptop immediately gains access to the room’s cameras, microphones, speakers and displays, delivering a consistent conferencing experience without needing to change settings or troubleshoot device recognition. The XB5’s virtual matrix routing allows far-end participants and local content to be shared across the network with minimal latency, improving meeting efficiency and communication quality.

The the Beatrice R12 rack-mount intercom. Designed for up to 12 channels, it provides full functionality while ensuring ease of use. The Beatrice R12 automatically detects Dante sources and destinations, displaying them on its high-resolution screen for intuitive operation in live environments, from theatres to smaller OB trucks and broadcast studios.

FMG-400 Media Gateway Card is specifically engineered for designed for Cradle Series RF02, delivering industry-leading performance that redefines media operations. It supports seamless transcoding (H.264/H.265/SpeedHQ) and multi-protocol streaming (NDI/NDI HX2/HX3/SRT/RTMP/RTSP/RTP/UDP/HLS), efficiently managing 1×4K P60 or 4×1080P60 video streams for flexible media routing and protocol convertion. FMG-400 Media Gateway Card also features a Bonding Mode that integrates with Kiloview P-Series 4G/5G bonding encoders, enabling secure remote device management and media workflow control.

Our P-AVN-4 can be used for a wide range of applications, from small deployments in a meeting room using only a few transceivers to large installations in higher educations or conference centers with hundreds of transceivers. The AVN series provides you with a standards based, interoperable and scalable solution that allows delivery of future proof installations.

• IPMX-Based Open Standards: Built on IPMX protocols for future-proof AV-over-IP deployment.
• Flexible Video Support: Up to 4K60 with JPEG XS compression for low-latency, high-quality video.
• Compact Form Factor: Small and easy to install, fits into any AV environment without compromise.
• Easy to use interface and advanced API: Interface designed for quick deployment and ease-of-use. With its advanced API, the P-AVN-4 can be controlled and managed by the PlexusAV Visual Array or integrate into existing network management systems.
• Multiple Network Ports: Three gigabit network ports, including an SFP option, allow for installation into fiber, ethernet and PoE network environments.
• Advanced Audio Integration: Support for Dante, AES67, and Linear PCM ensures professional-grade audio quality.

Equally suited to FOH duties as a highly capable system manager and console switcher, or as the hub of a complex installation system, the DM88 can control and process it all, simply and capably. The DM88 incorporates not only the best quality audio conversion and DSP, but also new levels of flexibility for routing and processing. Featuring 16 Dante, 8 analogue and 8 AES inputs, these are all available to be matrixed to one of 16 processing channels, optimised for either general input processing or for more specialised output speaker processing.

SoundCoreHero is a professional all-in-one audio solution designed for precise sound management across multiple independent zones. It combines a multichannel audio player, advanced DSP processor (with Gain, EQ, Compressor, Limiter, Delay), content automation (music, announcements, ads), and a powerful scheduling and control system—all in a single hardware platform. Supporting Dante and AES67, it ensures high-quality IP audio transmission. Ideal for both fixed installations and live events, SoundCoreHero allows simultaneous playback of different audio sources in various zones (e.g., relaxing music in a spa, ads in a retail space, announcements in a restaurant). The system supports remote control via external platforms (Crestron, Extron, AMX, RTI) through API, and can also control third-party devices using HTTP, TCP, UDP, or Modbus TCP/IP protocols, making it a flexible component of complex AV setups. Perfect for hotels, offices, shopping centers, theme parks, and any environment requiring independent, high-quality audio distribution.

The DAV-03SBL is an advanced AV solution built on the Intel® Smart Display Module platform, enabling seamless integration into Intel® SDM-compatible displays and projectors while eliminating the need for external equipment such as wall boxes or patch panels. It delivers high-quality 4K UHD 60p 4:4:4 video and precise audio transmission with ultra-low latency and perfect synchronization over a single 1GbE IP connection. Utilizing the Colibri codec, the DAV-03SBL ensures real-time AV delivery, ideal for live events and large-scale installations. Fully compatible with Dante AV Ultra, it supports centralized control via Dante Controller, Dante Director, Dante Domain Manager, and Dante Studio. AES67 support ensures interoperability with other AES67-compliant devices. With dual Ethernet ports, the DAV-03SBL enables daisy-chain connectivity for simplified video wall and multi-screen installations, reducing system complexity and cost. Designed for corporate AV, education, digital signage, broadcasting, and live events, the DAV-03SBL offers outstanding flexibility, scalability, and reliability for professional AV environments.

• Dante AV Ultra Colibri to Intel® SDM
• Up to 4K Ultra HD 60p 4:4:4
• HDR 10 & HLG
• Support Videowall
• Daisy-Chain Connectivity
• 1GbE PoE IP + 1GbE IP
• IR In/Out ports

he RXT-4D is a 4” desktop touch panel with a ReAX™ JavaScript based control system. Ideal for conference rooms, educational facilities, hospitality, digital signage and more. The RXT-4D has a beautiful 720 x 720 1:1 aspect ratio touch screen with 160° viewing. It is also designed to work as a Dante™/AES67 beam forming microphone with advanced hardware for feedback suppression, auto gain, & noise cancelation. The 2D/3D graphics engine with 4K30 H.264 streaming decoder provides a powerful solution for complex graphics and video, ensuring an enhanced user experience. To further enhance the experience, the RXT-4D has a 4-watt powered speaker, proximity sensor, & ambient light sensor. The internal web server allows control from remote devices like cell phones and computers. The RXT-4D is a powerful ‘all-in-one’ solution for your presentation and automation needs. Core Studio tool is available free of charge for code and interface creation.

• Voting
• Booking
• Name Placeholder
• Raise Hand Function
• Full Room Automation
• Mix-Minus
• Assistive Hearing & Translation Talkback
• Wireless Remote Web Control
• Fully Customizable