Cart
← Back to Product Catalog

D-NVC2

Dante Interface Cards

More Details

Similar Products

danteeventideexpansion
  • Eventide

Eventide – Dante Expansion card

Audinate Brooklyn II Dante Module based design

32 In / 32 Out operation at all supported H9000 sample rates

Sample Rate Clock Sources: Brooklyn II Module, Dante network, H9000

AES67 Support

Either 2 Primary and 2 Redundant Networks Connections or 4 Primary Network Connections

Can reside in any H9000 Option Slot

    Dante Interface Cards
See the product
focusrite-rednet-PCIer-card_600px|focusrite-rednet-PCIer-card_600px
  • Focusrite

Focusrite – RedNet PCIeR

RedNet PCIeR combines extremely low latency with Ethernet redundancy, offering the best possible system performance coupled with exceptional reliability. RedNet PCIeR combines extremely low latency with Ethernet redundancy, offering the best possible system performance coupled with exceptional reliability. The card requires a standard PCIe slot in a Windows or Mac computer and delivers up to 128 channels I/O with under 3ms latency*. Dual RJ45 Gigabit Ethernet connectors switch automatically according to network availability and link the audio computer to the rest of the network. Key Features and Performance
  • Dual Ethernet ports for full redundancy
  • 128 channels in and 128 channels out at 96kHz and below
  • 64 channels in and 64 channels out at 176.4kHz and 192kHz
  • Compatible with any Dante network
  • Up to 192 kHz sample rate
  • Under 3ms analogue-to-analogue round-trip latency through DAW with Focusrite RedNet A-D/D-A*
  • ASIO and Core Audio drivers
  • Thunderbolt PCIe chassis compatible
*Dependent on ASIO/Core Audio buffer size

Where to Buy: Focusrite RedNet PCIeR card

    Dante Interface Cards
  • Dante Ch: 128x128
  • 24-bit
See the product
Audac_-_ANI22|Audac_-_ANI22
  • AUDAC

Audac – ANI22

The ANI22 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with two input and two output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. The ANI22 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with two input and two output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. A truly plug & play solution is created when linking multiple DANTE enabled devices with each other on a standard IP network. It offers self-configuring solutions by using DHCP configuration, while the connection can be made to any existinig 100 Mbit or 1 Gbit network infrastructure. Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of 24 bit are simultaneously possible on all in and output channels, while guaranteeing an incredibly low latency with a maximum up to 5 ms. (depending of the network occupation). The network connection is implemented using an Ethercon compatible connector, allowing connection using standard RJ45 or ruggedized Ethercon connections in professional applications. The ANI22 comes delivered as an installation kit, including all required accessories for integration into the amplifier chassis. Installation shall be performed by qualified technicians.
    Dante Interface Cards
See the product