Dante-enabled Product Catalog

Crestron's DM-NVX-352 is a reliable, high-performance AV over IP encoder or decoder that transports 4K60 4:4:4 video over standard Gigabit Ethernet with no perceptible latency or loss of quality.  Crestron's DM-NVX-352 is a reliable, high-performance AV over IP encoder or decoder that transports 4K60 4:4:4 video over standard Gigabit Ethernet with no perceptible latency or loss of quality. It supports HDR10 and HDCP 2.2, with built-in scaling and video wall processing, USB and KVM routing, native Dante® or AES67 transmit and receive capability, and optional fiber connectivity. The DM-NVX-352 provides a secure, scalable 4K signal routing solution for enterprise and campus-wide content distribution applications. 

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and two AX series XLR analogue outputs in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and two AX series XLR analogue outputs in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.

The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.

The unD6IO-BT is the latest addition to Attero Tech's innovative Dante wall plates. The unD6IO-BT allows any Bluetooth smart phone, tablet, or PC to stream audio wirelessly onto a Dante network. Bluetooth pairing is simple and intuitive. The unD6IO-BT also sports a 3.5mm stero analog input, stero RCA analog inputs, a 3.5mm stereo analog output, and 2 balanced analog outputs on side mounted Phoenix connectors. The unD6IO-BT is the perfect BYOD interface to a Dante network.

The Atlona OmniStream™ AT-OMNI-232 is a Dante networked audio interface that transmits and receives two channels of audio over a network. AT-OMNI-232 devices are ideal for integrating microphones and other audio sources with a Dante-equipped DSP and OmniStream AV decoders. The Atlona OmniStream™ AT-OMNI-232 is a Dante networked audio interface that transmits and receives two channels of audio over a network. AT-OMNI-232 devices are ideal for integrating microphones and other audio sources with a Dante-equipped DSP and OmniStream AV decoders. The AT-OMNI-232 features two balanced mic/line audio inputs with selectable 24-volt phantom power, as well as two balanced line level outputs. It can be powered over the network though Power over Ethernet (PoE), as well as from local AC power. The AT-OMNI-232 extends the power and flexibility of the OmniStream networked AV platform, by enabling facility-wide system designs that include complete audio system integration with Dante-based professional audio devices. It delivers the performance and dependability of traditional AV distribution, with the virtually unlimited scalability and cost efficiency of integrating over data networks. It addresses the many challenges AV and IT integrators encounter with implementing networked AV systems, while delivering immediate and long-term ROI to end users in enterprises and other organizations.

The Lab.gruppen PLM5K44 combines 5000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for touring applications. The Lab.gruppen PLM5K44 combines 5000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for touring applications.

The Lab.gruppen D 40:4L combines 4000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications. The Lab.gruppen D 40:4L combines 4000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications.

The Lab.gruppen D 20:4L combines 2000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications. The Lab.gruppen D 20:4L combines 2000W with 4 flexible output power channel with the latest LAKE digital signal processing, DANTE digital audio networking and advanced system integrity monitoring for installation applications.

The Digi·Loop induction loop system is the first of its kind to maximize modern amplifier technology.  DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, loop phase shift and more.  Powerful Class D, pulse-width amplifiers maximize efficiency, and reduce size and weight.  And network control capability provides seamless, remote system set-up, operation and monitoring via laptop, tablet or other portable device.  The Digi-Loop’s dual-amplifier design offers flexibility, with the option of single 12A output for perimeter loops or dual 10A outputs for loop arrays or one loop and one loudspeaker.  Priority input (70-100V) is also available for connection to a paging system, ensuring life/safety announcements are heard loud and clear.  And Digi-Loop is the only loop amplifier to offer an easy-to-read LCD graphic display. System includes: (1) PLA DL 210 NET D DSP Induction Loop Amplifier (2) PLR BP1 Body-Pack Receivers (2) EAR 022 Surround Earphones (1) BAT KT6 Dual Drop-In Charger Kit (1) IDP 009 ADA Wall Plaque (T-Coil)

The Digi·Loop induction loop system is the first of its kind to maximize modern amplifier technology.  DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, loop phase shift and more.  Powerful Class D, pulse-width amplifiers maximize efficiency, and reduce size and weight.  And network control capability provides seamless, remote system set-up, operation and monitoring via laptop, tablet or other portable device.  The Digi-Loop’s dual-amplifier design offers flexibility, with the option of single 12A output for perimeter loops or dual 10A outputs for loop arrays or one loop and one loudspeaker. Digi-Loop is the only loop amplifier to offer an easy-to-read LCD graphic display. System includes: (1) PLA DL 210 NET D DSP Induction Loop Amplifier (2) PLR BP1 Body-Pack Receivers (2) EAR 022 Surround Earphones (1) BAT KT6 Dual Drop-In Charger Kit (2) PLW F500 Power Loop Wire (flat copper wire) (6) FWT 001 Flat Wire Warning Tape (1) IDP 009 ADA Wall Plaque (T-Coil)

The new DFT-EXP Series from Joseph Electronics provides for up to 12 channels of 3G/HD/SDI uncompressed video plus four additional slots that can be fitted with a selection of other convenient modules for audio, intercom, analog video, genlock, MADI, and even Dante. The new DFT-EXP Series from Joseph Electronics provides for up to 12 channels of 3G/HD/SDI uncompressed video plus four additional slots that can be fitted with a selection of other convenient modules for audio, intercom, analog video, genlock, MADI, and even Dante. All of this is transported on one or two singlemode fibers, depends on configuration) and can also be operated with optical redundancy. Housed in a compact 2RU fanless enclosure with redundant power supplies, up to six 2-channel modules can be fitted for signal counts from 4 to 12. The direction of each module is field reconfigurable to take care of last minute changes. Transmit modules are red and receive modules are blue. Red modules (TX) are slot specific and clearly labeled. The Blue modules (RX) are generic and can go in any slot.  Modules support SMPTE 424, SMPTE 292, SMPTE 259, SMPTE 297 and DVB-ASI. Units can be set to operate in non-reclocking mode to handle any signal from 50Mb/s all the way up to 3Gb/s. A Joseph’s exclusive is the Bypass Channel. This innovative feature allows you to add even more analog video, audio, or data. Units can be custom configured with fiber connections on the front or rear of the enclosure. Convenient LEDs indicate signal presence and link status. Trust Joseph Electronics to come up with innovative and flexible fiber transport solutions that allow broadcasters to make those last-minute changes quickly and easily.  The DFT-EXP Series is ideal for anyone who needs to move a variety of signals point-to-point. Whether for announce booths, host positions, stand-up postions, edit suites, or cross-campus feeds, The DFT-EXP takes advantage of the high bandwidth and dramatic weight savings offered by fiber to deliver pristine video signals and clean audio over far greater distances than copper. Custom features such as the placement of the fiber connectors; audio, Ethernet, data, and  intercom connectivity; optical redundancy; 1 or 2 fiber operation; and the By-Pass channel, ensure that customers get exactly wht they need and don’t pay for features that they don’t want or will never use. The ability to reconfigure your signals on-the-go has gone from being a convenience to being an absolute necessity. With nothing more than a basic screwdriver, users can quickly and easily make the last minute changes the inevitably come up on remote broadcasts.

The digital mixer DMIX-20 from IMG STAGELINE impresses with an intuitive operating concept of the well thought-out user surface. Due to the compact design, it is also ideally suited for applications on smaller to medium-sized stages and for your home studio. The device quickly impresses musicians, DJs and live sound mixers. Combined with an external router, the DMIX-20 also allows for a convenient operation via iPad using a network connection. The free app can be downloaded from the app store.  The digital mixer DMIX-20 from IMG STAGELINE impresses with an intuitive operating concept of the well thought-out user surface. Due to the compact design, it is also ideally suited for applications on smaller to medium-sized stages and for your home studio. The device quickly impresses musicians, DJs and live sound mixers. Combined with an external router, the DMIX-20 also allows for a convenient operation via iPad using a network connection. The free app can be downloaded from the app store.  The console features 16 mono input channels and 2 stereo input channels as well as +48 V phantom power. The 8 outputs can either be used as 4 aux paths and 4 subgroup paths or as 8 aux outputs. It features 2 integrated DSPs with 12 types of effects, noise gate, compressor/limiter, delay and a 100 mm motor-driven fader.  The colour LCD touch screen facilitates the operation with your settings which can easily be stored due to modern digital technology. Thus, you are able to store the channel's sound adjustments via parametric equalizer, graphical equalizer or use the options of the effect unit. Furthermore, the digital mixer enables you to store 24 overall settings. The full duplex port allows for simultaneous recording and reproduction from a PC or onto a PC. It is also equipped with two headphone outputs. 19-channel digital audio mixer,   with touch screen, 2 DSP effect units and USB interface.

• 16 mono input channels with assignable controls
• 8 channel inserts
• 2 stereo input channels
• 1 USB audio channel
• Full duplex USB port (allows for simultaneous recording and reproduction) for reproduction of digital audio data from a PC and for recording mixings onto a PC
• 2 integrated DSPs as well as equalizer, noise gate, compressor/limiter and delay
• 4 aux send outputs and 4 subgroup outputs or 8 aux outputs
• 6 DCA groups
• Control room function
• 100 mm motor-driven fader
• Sampling rate: 24 bits/48 kHz
• Settings can be stored
• Remote control possible via iPad (connected to external router)
• RJ45 network connection for remote control
• +48 V phantom power
• 2 adjustable headphone outputs
• 17.8 cm colour LCD touch screen (7") for display and settings
• Mounting facility for extension modules available at option
• 482 mm (19") rack installation, 8 RS, with supplied mounting brackets

VUE’s al-Class line array systems have achieved international recognition for raising the bar for sonic definition, through a combination of advanced transducer design and tightly integrated dsp. VUE’s al-Class line array systems have achieved international recognition for raising the bar for sonic definition, through a combination of advanced transducer design and tightly integrated dsp, The al-12 expands the scale of applications that can benefit from the al-Class’ pristine sonic performance.

• Three-way, High output true Line Array design
• Extremely Scalable System – combine al-12 acoustic elements with al-8s and al-4s to build complex hybrid arrays
• New State-of the Art transducer technology
• Integrated VUEDrive™ System Engines with SystemVUE control Dante Audio networking
• Fully compatible with VUEPoint beam steering technology
• Integrated flying hardware allows quick assembly of arrays
• Optional subwoofers, flying and transport accessories

The al-4 Subcompact Line Array System utilizes advanced technologies to extract unparalleled performance from an ultra-compact package. With cutting-edge technologies such as a beryllium compression driver, Kevlar/Neo low-frequency transducers, and precision amplification and DSP, the highly scalable al-4 system brings pristine sound quality and coveted line array performance to more applications than ever before. The al-4 Subcompact Line Array System utilizes advanced technologies to extract unparalleled performance from an ultra-compact package. With cutting-edge technologies such as a beryllium compression driver, Kevlar/Neo low-frequency transducers, and precision amplification and DSP, the highly scalable al-4 system brings pristine sound quality and coveted line array performance to more applications than ever before. The al-4 Line Array System is made up of the al-4 Acoustic Element, the rack mount V4 Systems Engine, which provides amplification, DSP and system control and the al-4SB flyable isobaric subwoofer, along with a wide range of accessories for suspension and transportation.  The system is sold in standard blocks, with eight al-4 Acoustic Elements and a single V4 Systems Engine (designed to power up to 8 al-4 elements) comprising a single block. Multiple al-4 blocks can be combined to address larger applications.

• al-4 elements make it easy to scale al-4 arrays for various applications (one rental inventory serves a variety of applications)
• Fly up to 24 al-4 elements from a single fly-bar
• 90° horizontal coverage angle per al-4 element
• VUE designed 1-inch exit neodymium compression driver with Truextent® beryllium diaphragm
• VUE designed dual 4-inch Kevlar cone neodymium woofers
• Compact and lightweight – each al-4 element is 18.9 x 5.5 x 10.3 inches (W x H x D) and 18 lbs.

The al-8 Compact Line Array System picks up where the al-4 Subcompact Line Array System leaves off. The al-8 ‘Acoustic Linearity’ element utilizes VUE’s most advanced technologies including CST™ to extract exceptional performance from its compact design. The al-8 Compact Line Array System picks up where the al-4 Subcompact Line Array System leaves off. The al-8 ‘Acoustic Linearity’ element utilizes VUE’s most advanced technologies including CST™ to extract exceptional performance from its compact design. Innovative technologies such as beryllium compression drivers, Kevlar/Neo transducers, precision amplification and DSP, onboard SystemVUE networking, and full compatibility with the VUEPoint beam steering technology allow the highly scalable al-8 to deliver unprecedented performance to a broad range of mid-sized sound reinforcement applications.

• Each al-8 Compact Line Array System “block” includes
• four al-8 Acoustic Elements and a single VUEDrive™ V6 Systems Engine
• Scalable by adding or removing other al-Class acoustic elements, or combining multiple al-8 blocks
• Onboard SystemVUE™ networking
• Fully compatible with VUEPoint beam steering technology
• Integrated flying hardware allows quick assembly of arrays of up to 16 elements per flybar
• Optional flying and transport accessories available

The DMIX-20DANTE is a module for integrating the digital mixer DMIX-20 into a Dante™ network. The DMIX-20DANTE is a module for integrating the digital mixer DMIX-20 into a Dante™ network.

• Audio transmission via Ethernet using Dante™ protocol
• Parallel transmission of 32 x 32 audio channels
• Easy signal control via network technology
• Mini PCI motherboard
• Connections: 2 x RJ45

The ANI22 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with two input and two output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. The ANI22 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with two input and two output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. A truly plug & play solution is created when linking multiple DANTE enabled devices with each other on a standard IP network. It offers self-configuring solutions by using DHCP configuration, while the connection can be made to any existinig 100 Mbit or 1 Gbit network infrastructure. Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of 24 bit are simultaneously possible on all in and output channels, while guaranteeing an incredibly low latency with a maximum up to 5 ms. (depending of the network occupation). The network connection is implemented using an Ethercon compatible connector, allowing connection using standard RJ45 or ruggedized Ethercon connections in professional applications. The ANI22 comes delivered as an installation kit, including all required accessories for integration into the amplifier chassis. Installation shall be performed by qualified technicians.

The ANI44 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with four input and four output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. The ANI44 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with four input and four output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. A truly plug & play solution is created when linking multiple DANTE enabled devices with each other on a standard IP network. It offers self-configuring solutions by using DHCP configuration, while the connection can be made to any existinig 100 Mbit or 1 Gbit network infrastructure. Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of 24 bit are simultaneously possible on all in and output channels, while guaranteeing an incredibly low latency with a maximum up to 5 ms. (depending of the network occupation). The network connection is implemented using an Ethercon compatible connector, allowing connection using standard RJ45 or ruggedized Ethercon connections in professional applications. The ANI44 comes delivered as an installation kit,including all required accessories for integration into the amplifier chassis. Installation shall be performed by qualified technicians.

Formerly known as BLU-DAN The Soundweb London BLU-DA offers Dante / AES67 audio and BLU link. This means that the BLU-DA can be used to ‘add’ Dante / AES67 to one or more BLU link devices. The BLU-DA is configurable through HiQnet™ Audio Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The BLU-DA features Dante and AES67 audio. The BLU-DA is capable of simultaneously transmitting and receiving up to 64 channels of Dante or AES67 audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port. The BLU-DA also includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-DA also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect. The BLU-DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution. Features

• AES67 and Dante Audio with support for Dante Domain Manager
• BLU link – 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• ‘Add’ Dante / AES67 to one or more BLU link devices
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet Audio Architect
• 1RU, Half-Rack Device
• AES67 Compatible

“KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging KE2400A is a two channel intelligent power amplifier. “KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging “KE” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core uses cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and uses high power tube as the full bridge switch tube, the power of the internal resistance is low. It can provide high current moment to load.

“KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging KE1600A is a two channel intelligent power amplifier. “KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging “KE” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core uses cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and uses high power tube as the full bridge switch tube, the power of the internal resistance is low. It can provide high current moment to load.

KE1600B is a four channel intelligent power amplifier. “KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging “KE” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core uses cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and uses high power tube as the full bridge switch tube, the power of the internal resistance is low. It can provide high current moment to load.

The DQ20 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities. The DQ20 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities. The DQ Series of advanced system amplifiers offer a unique combination of high power and audio performance, seamlessly combined with advanced DSP and network control. The DQ Series offers three models, physically identical four-in-four-out amplifiers but with varying total output power configurations of 6,000 watts (DQ6), 10,000 watts (DQ10) and 20,000 watts (DQ20) to suit specific loudspeaker models and audio applications. The DQ Series models offer extremely high power density in a convenient and flexible format for both mobile applications and installations alike. DQ Series advanced system amplifiers represent the most convenient solution for powering EM Acoustics loudspeakers. Each amplifier comes loaded with preset files for all EM Acoustics loudspeaker products, as well as a dedicated “linear” preset with no processor settings applied – but also blank memory slots for users to create their own setting files. Aside from the non-adjustable factory settings for each EM Acoustics product (such as high/low pass filters and limiters), users have access to a variety of processing functions including gain, delay and EQ (parametric and shelf) for system or venue optimisation. Power delivery is an area where the DQ Series amplifiers are unmatched. A state-of-the-art switchmode power supply with power factor correction ensures that a DQ Series amplifier can deliver all that is required, even under demanding load conditions and across a wide range of mains supply voltages. Each channel of a DQ Series amplifier can be configured to deliver its maximum power into either 2 or 4 Ohm nominal loads via the Podware software platform, therefore offering designers and integrators unparalleled flexibility and effectiveness. The use of state-of-the-art components and a finely optimised design results in generous power reserves, thus ensuring that pristine sound quality is maintained even under the most extreme conditions, anywhere in the world. DQ Series amplifiers have both analog inputs (4) and AES3 digital inputs (2) as standard, and can be supplied with an optional Dante™ networked audio input card if required (model numbers DQ6D, DQ10D and DQ20D). Maximum flexibility was the thought process with regards the input infrastructure – the four-in-four-out configuration allows the DQ Series models to be highly flexible whether deployed powering front of house systems, monitor mixes, or fill loudspeakers. The front panel provides an intuitive set of controls and indicators to enable simple and straightforward operation of all functions without the need for the remote software. A set of five LED indicators show signal level from -12dB to +12dB as well as clip, for each of the four DSP inputs. Six illuminated push buttons and two velocity-sensitive rotary encoders provide the user interface for all the input and output functions, as well as the utility features, in conjunction with the clear back-lit graphical display. A further set of LED indicators show output level and limiter status, and individual backlit channel mute buttons are also provided. A final set of four LED indicators give further status information for the amplifier including AES3 or Dante network audio input (if selected), device control network online status, and also the presence of a system EQ overlay if activated via the Podware remote control software platform.

“KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate; 30 users memory, intuitive and friendly computer interface, RJ45 interface; Channel Copy function, convenient debugging KE1000B is a four channel intelligent power amplifier. “KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted. Function of phase inversion, digital noise gate; 30 users memory, intuitive and friendly computer interface, RJ45 interface; Channel Copy function, convenient debugging “KE” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core using cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and use high power tube as the full bridge switch tube, the power of the internal resistance is low