Cart
← Back to Product Catalog

Digidynam – DT-400

I/O Interfaces

Similar Products

focusrite-A8R_600px|focusrite-A8R_600px
  • Focusrite

Focusrite – RedNet A8R

RedNet A8R expands Focusrite’s growing range of 1U Dante interfaces with network and power supply redundancy, providing eight channels of analogue input and output.  RedNet A8R expands Focusrite’s growing range of 1U Dante interfaces with network and power supply redundancy, providing eight channels of analogue input and output. RedNet A8R offers high quality 192kHz/24-bit A-D and D-A digital conversion with up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network. RedNet A8R provides 24-bit conversion at 44.1, 48, 88.2, 96, 176.4 and 192kHz sample rates (remotely-selectable) and includes pull-up/down capability. Electronically-balanced analogue audio I/O is provided on DB25 connectors wired to AES59 specifications. Internal signals are balanced throughout. Inputs and outputs are remotely configurable for 0dBFS= +18dBu or +24dBu signal levels. In addition, two channels of AES/EBU I/O are provided on XLR connectors, with sample rate conversion on the input. The clock source for the unit may be internal, or external via Word Clock or DARS (via the XLR input). RedNet A8R also outputs Word Clock. RedNet A8R features power and network redundancy, with two separate universal (100–240V) PSUs, which include IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors. These ports can be configured remotely to Redundant or Switched (daisy-chain) mode. Key Features
  • Eight channels of high-quality line-level analogue I/O
  • 24-bit precision Focusrite conversion up to 192kHz
  • 119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
  • Internally balanced throughout
  • Dante-based remote-controlled audio-over-IP connectivity
  • Dual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliability
  • Word Clock I/O and DARS for increased flexibility, plus an additional two channels of AES/EBU I/O
  • Analogue I/O to AES59 standard on DB25 connectors
  • Comprehensive front-panel indicators
  • Software-based routing and control – no hardware patching required
    I/O Interfaces
See the product
radial-dinet-tx2
  • Radial Engineering

Radial – DiNet DAN-TX2

The Radial DiNET™ DAN-TX2™ transmitter is an expanded versions of the DAN-TX Dante interface. The Radial DiNET™ DAN-TX2™ transmitter is an expanded versions of the DAN-TX Dante interface. Featuring Neutrik Ethercon connectors demanded by professional touring clients, both boxes deliver 24bit/96kHz resolution across any network using the Dante protocol. The DAN-TX2 features XLR combo, RCA, and 3.5mm analog inputs, with separate trim controls for both channels. 
    I/O Interfaces
See the product
Dante官网logo
  • BARE

BARE – DE-6

Features： 1. The audio signal and power transmission of the speaker are realized through the same network cable. 2. The RJ45 interface on the back panel of the box is equipped with XLR firmware, which can be used for waterproofing and strengthen the connection between the box and the wire. 3. The network cable realizes signal transmission and power supply; 4. The IP address is automatically assigned through the router DHCP; 5. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 7. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 8. It has complete protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 9. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product