WorxAudio – XQ10T-P


More details

Similar Products

Crest_Audio_VR_218_Sub_Front
  • Crest Audio

Crest Audio – Versarray PRO 218 SUB

The Versarray™ Pro 218 Sub Powered Subwoofer speaker system consists of a pair of 18″ Low Rider® woofers combined with a super-solid cabinet with a simple, quick, yet flexible rigging system.  Designed to provide modular coverage of small to medium venues, and intended for use with the companion Versarray™ Pro 112 models, the Versarray™ Pro 218 Sub offers excellent versatility with a very high performance capability. The subwoofer system consists of the following woofer components: a pair of 18″ Low Rider® series woofers with a very long throw 4″ voice coil structure. Capable of over 800W of continuous power handling (AES Std 2-1984) each, these woofers can project a lot of low frequency energy. 

The Versarray™ Pro 218 Sub incorporates Peavey’s UniVent™ air pumping venting system.  The UniVent™ venting system literally pumps air through the enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. This helps keep the woofer operating temperatures from getting so high, and increases reliability and reduces power compression under heavy continuous drive conditions. The air pumping action is achieved without excessive turbulence or any significant net asymmetry of total vent air flow.

Power for both woofers is supplied by some very efficient power amplifier systems, controlled by a sophisticated and refined DSP operations system with Dante connection capability.  Total system power is 3000W total peak power, with 1500W total sine wave power for the woofers. This sheer power is controlled precisely and processed by a high performance DSP system, which provides all the crossover and EQ functions, as well as providing all limiting, compression and driver protection duties with unfailing attention to every detail of the music.

An optional special groundstack bracket set mounts to the Versarray 218 Pro Sub, and allows up to three of the Versarray™ Pro 112’s to be mounted on top of the Versarray 218 Pro Sub, and angled upward, for use on stage in a stadium seating situation. 

    Speakers
s218
  • Cadac

Cadac – S218

The S218 is a self-powered high-end subwoofer, which features 2 x 18" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 35 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S218 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

    Speakers
FBT_ASSET_DATALEAN- PRODUCTS- MUSE- MUSE 210LND-LN-L- IMAGES- Muse210LND_fronte
  • FBT elettronica

FBT elettronica – MUSE 210LND

MUSE 210LND/LN has two custom 250mm woofers with 64mm high excursion coil and two custom B&C drivers with 25mm throat. The waveguide, optimised with BEM finite element simulations to minimise distortion, has a horizontal dispersion of 90°. The pinnacle of the entire project is the new amplification module with TCP/IP network interface. Based on the OCA ALLIANCE AES70 standard, the new MUSE family receives 24-bit 48-96Khz digital audio streaming from all devices compatible with the DANTE standard and communicates with the INFINITO System Management Suite remote control software.
    Speakers