Cart
← Back to Product Catalog

Linea Research – 44M06-DANTE

Amplifiers

More details

Similar Products

kme-da230_600px_0|kme-da230_600px_0
  • KME

KME – DA230

The DA230 is a fully digital 2-channel class D amplifier with 1500W@4ohm output power per channel. It features a high performance DSP offering extensive features like matrix router, crossovers, parametric EQs, delays, limiters and much more. The DA230 is a fully digital 2-channel class D amplifier with 1500W@4ohm output power per channel. It features a high performance DSP offering extensive features like matrix router, crossovers, parametric EQs, delays, limiters and much more. The amplifier has 2 analogue inputs as well as one digital port accepting AES/EBU and SPDIF formats of 16 to 24 bit and 32 to 192 kHz sampling frequency. Furthermore, the signal applied to the link output can be selected from the matrix router (either analogue or digital). The optional Dante module enables the integration of the amplifier into a Dante audio network. The module can handle up to 8 separate audio streams which can be also used externally via AES/EBU outputs.
    Amplifiers
See the product
monisms-MNS-AMP30XX-2P
  • MONISMS

MONISMS – MNS-AMP30XXA-2P

The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 30W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.


MNS-AMP30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+  used,  It can used the external 19VDC power supply.
Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

[Model:MNS-AMP3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

    Amplifiers
See the product
IX30-4
  • Dynacord

IX30:4

The IX30:4 is a 4-channel networked DSP amplifier with 6 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX30:4 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality. IX30:4 features eight (8) Dante inputs, eight (8) Dante outputs and four (4) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 12 x 12 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 12 inputs feature pilot-tone detection, while the eight (8) Dante and four (4) amplifier outputs allow to add pilot tones up to 30 kHz. The IX30:4 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices. IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.
    Amplifiers
See the product