EAW – RADIUS RSX208L


More details

Similar Products

tannoy-qflex-8|tannoy-qflex-8
  • Tannoy

Tannoy – QFlex 8

The QFlex 8 can be used as a standalone self-powered column array device for speech only applications in smaller spaces, where only limited steering is required. For greater degrees of beam control and longer throw, full range applications, a larger QFlex model is recommended. QFlex is a range of digitally steerable, multi-channel, array speaker systems for the professional install market. QFlex is designed as a complete solution for applications with difficult acoustics, such as houses of worship, transportation hubs, convention centres, conference facilities, shopping malls, performing arts centres and museums. QFlex is quite revolutionary in that it is able to achieve even coverage and SPL which is maintained across the listening plane. QFlex is able to create an asymmetrical pattern which allows similar SPLs both in the near and far field. It is able to steer the beam away from surfaces that cause reflections to frequencies beyond 12 kHz, making it the first digitally steerable array to maintain music quality over the desired area of coverage, all in a very architecturally pleasing package. The intuitive BeamEngine GUI allows the designer to specify target areas. Based on those target areas a steering algorithm is generated and tailored for that specific area, rather than having to choose from a limited palette of opening and steering angles. New features introduced on QFlex deliver more resolute safety and monitoring facilities, making it fully compliant in any life safety or mass notification environment. In addition QFlex has been weatherised for outdoor or harsh environments without compromising on the product’s sleek aesthetic, making it perfectly suited for large scale transport hub applications such as within airport terminals and major train stations. Among the key improvements on this front are the addition of Pilot Tone Detection capability, Sentinel SM1 System Monitor and certification to IP53 standards.
    Speakers
ipd4cm52
  • SoundTube

SoundTube – IPD-CM52s-BGM-II

Engineered for applications with limited plenum space. Incorporates a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.

    Speakers
  • 24-bit
  • 48kHz
soundtube-rs82ez
  • SoundTube

SoundTube – IPD-HP82-EZ

The IPD-HP82-EZ is an 8" open-ceiling speaker. The IPD-HP82-EZ is an 8" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates one 8.0 inch (203 mm) high power coaxial driver with BroadBeamHP™ compression driver technology for long throw and smooth directivity. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. Enclosure constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications. Aluminum grille with protective powder coated finish. 
    Speakers