Lance Design – ADX-8000


More details

Similar Products

ctp-systems-DCU304_1200px
  • CTP Systems

CTP Systems – DCU304

The DCU304 is a Dante enabled Commentary / Announcer unit. It has four inputs, one programme output and three talkback outputs.  The DCU304 is a Dante enabled Commentary / Announcer unit. The unit has four inputs, each selectable to left/right/both ears, one programme microphone output plus three 'lazy' talkback outputs. On pressing a talkback key the programme microphone output will be silently muted and redirected to the selected talkback output(s). The microphone also has a local line level analogue output which also mutes when a talkback key is pressed. Network connection may be either a Neutrik ethercon or a standard RJ45 connector. A LED indicates network status. Microphone gain is adjustable in 1dB steps from +70dB to +15dB and +5dB via the OLED display and lockable push buttons. 48 volt phantom power may also be selected. The DCU304 may be powered PoE or via an external 12 volt power source. The DCU304 can also be used as a cost effective Dante four wire box or as a top quality analogue or Dante mic amp.
    Commentary Systems
B-DF4fb
  • CTP Systems

CTP Systems – B-DF4

The B-DF4 is a network four channel four wire unit in a compact aluminium beltpack enclosure.
With four audio inputs and four audio outputs it will meet the most demanding beltpack requirements. The B-DF4 has a built in speaker so may be used as a handy four wire box.
B-DF4 front
The talk buttons can be programmed to operate push to talk, latching or 'smart' (tap to latch, push to talk). When selected to talk the buttons illuminate red.
Listen input(s) may be enabled/disabled in conjunction with the listen select switch. Buttons may be set to flash on incoming audio.
Programming the B-DF4 is simple using the OLED display which also shows line input and output levels during normal operation.Power may be supplied Power over ethernet (PoE) or a 9-16 volt external DC supply.

    Commentary Systems