The products of the conversion interface series are low-latency, high-precision data transmission solutions based on the Dante network. Analog signals can be converted into digital signals and connected to the Dante network through the network port. The data flowing into the Dante network can be routed and configured through its dedicated PC software Dante Controller, output to different Dante devices, and then converted into analog signals through DA conversion.
Audio Embedders & De-Embedders, Conference Systems
The converter is compatible with all Dante interfaces and has all the features of Dante audio networks. Each converter box can provide high-fidelity sound quality restoration, ultra-low latency and precise synchronization of sampling rates across the entire network.
Compact design, easy to use, plug and play; conversion between analog audio signals and Dante digital audio signals; expansion of audio and power through a network cable; full support for Dante software, easy configuration of network and audio routing; support for PoE power supply, built-in lightning and surge protection;
Audio Embedders & De-Embedders, Conference Systems
A device that integrates video matrix, audio matrix, amplifier module, and central control processor.
It can provide complete integration requirements for small and medium-sized multimedia systems, suitable for highly integrated application environments that require multiple display devices, sound reinforcement devices, processing switching devices, environmental equipment control, etc. It can complete audio and video and environmental system control through PAD, and has real-time monitoring of signal status.
16 input and 8 output audio matrix, with 4 inputs fixed at the factory and 12 inputs and 8 outputs customized by the user
AFC (Feedback Suppression) for independent channels, using notch algorithm, with a 10dB increase in transmission gain, noise suppression (ANS), and an 18dB increase in signal-to-noise ratio 3.8 segment British parametric equalization, providing
Dante：1 x Dante ® Ethernet interface connector, supporting POE power supply; 1 x Dante ® Ethernet interface connector; Two interfaces implement data exchange function.
DC 12V: A DC connector used for connecting DC 12V1A power adapters.
Input interface: 4-channel microphone/line input,
3-pin green wiring terminal Output interface: 4-channel line output,
3-pin green terminal block Gain: Input: 0~+48dB, 6dB per step;
Output: -60~0dB,
1dB per step Maximum level: Input:+18dBu @ 0dB input gain;
Output:+18dBu @ 0dB output gain
Input impedance:>1.8k Ω Effective
Input Noise (EIN): -119dB @ 48dB gain
Effective output noise:<-79dBu @ 0dB gain
Harmonic distortion:<0.05%
Sampling rate: 44.1kHz or 48kHz
AV Encoders & Decoders, Audio Embedders & De-Embedders
The Vittoria provides a bridge between two internal and separate Dante and Ravenna networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 64 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network.
As each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 96kHz.
Features:
Provides a firewall between a Dante & Ravenna network interface
Acts as a bridge bi-directionally with Dante and AES67/Ravenna Networks
Acts as an interface between Dante and full SMPTE ST2110-30
64 input and output channels at sample rates up to 48kHz
32 input and output channels at sample rates up to 96kHz
The two networks can operate asynchronously or at different sample rates
Transmitting up to 4K/UltraHD 60p HDMI 2.0 video output, Dante AV Ultra is a hardware based solution that provides 4K60 video encoding and decoding, suitable for high-quality, visually lossless videos and embedded software based solutions. Dante AV 4K-T can convert 4K/UHD/2K/HD/VESA SDI and HDMI to Dante AV Ultra signals, while Dante AV 4K-R supports converting Dante AV Ultra signals to 4K/UHD/2K/HD/VESA SDI and HDMI. This device provides unprecedented low latency and clock synchronization, ensuring perfect lip sync between the large screens on site and external broadcasts and streams. It can independently route audio and video streams. By utilizing Dante AV compatible with 1 GigE network, more cost-effective conversion can be achieved and existing network infrastructure can be utilized.
The Dante AV solution is compatible with thousands of Dante supported audio products currently available. Our advantage of using Audinate Dante Controller on Windows and macOS is the ability to put audio and video on the same platform and manage them uniformly through Dante Controller. Access complete verification and execute HDCP 2.2 via IP. Easily control remote devices through USB HID, serial interface, infrared transmission, and IP control (IR). Use Power over Ethernet POE+(25W 802.3at POE+) or DC power supply (12V 4a). HDMI 2.0 input (4K-T); HDMI 2.0 output (4K-R).
The DM7C-EX is a space-efficient Dante-enabled 72-channel single bay digital console with control expansion, designed for professional applications. It offers the convenience of rack mountability using the RK1, and equips users with an array of advanced tools to ensure the creation of a flawless mix. The DM7C is capable of 96kHz sample rates, with 18 faders and a high-resolution 12" multi-touch screen complemented by an additional 7" screen.
The console comes with an internal dual power supply and an 18x18 audio interface that seamlessly integrates Yamaha's VST RACK. Additionally it features DAW remote capabilities and AI assist functions, augmenting its versatility and usability. The DM7C-EX is an ideal choice for live sound, theatrical productions, broadcasting environments, and corporate AV.
The DM7 Compact is a Dante-equipped versatile digital mixing console with unparalleled sound quality, ease of operation, and high reliability that make it perfect for a wide range of applications. The DM7 Compact is configured with 12 + 4 faders and a 1 x 12” + 1 x 7” multi-touch screen, and a rack-mountable with an optional RK1 rack mount kit.
ADECIA Solutions provide all components for a perfect audio setup. From voice capturing via various microphones with built in DSP technology, over an innovative sound processing to a PoE powered active speaker system.
With new and ever-changing communication requirements, one thing remains the same: the need for high-quality, worry-free audio for collaboration. Based on Dante audio networking, ADECIA helps organizations overcome challenges with implementation, configuration and room acoustics by providing all components required for a successful installation and operation - designed to work seamlessly together to reduce set up time, costs and complexities - to get a professional, high quality audio experience.
The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 600W x 4 at 8Ω.
4 x 600W at 8Ω
20 x 8 powerful input matrix function
Sampling frequency is up to 96k
16ch Dante input/output
Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 600W x 4 at 8Ω.
4 x 600W at 8Ω
20 x 8 powerful input matrix function
Sampling frequency is up to 96k
16ch Dante input/output
Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8Ω. Switchable for low and high impedance speaker systems.
4 x 1200W at 8Ω, 4 x 1200W at 100V/70V
20 x 8 powerful input matrix function
Sampling frequency is up to 96k
16ch Dante input/output
Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8Ω.
4 x 1200W at 8Ω
20 x 8 powerful input matrix function
Sampling frequency is up to 96k
16ch Dante input/output
Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
An open architecture-type digital signal processor, which offers state-of-the-art performance and connectivity, 96 kHz sound quality and support for up to 256 input/output channels.*
* DEK-DME7-DX64, the license to expand I/O channels and matrix mixer, and ProVisionaire Cloud service will be provided in the future.
This I/O rack offers Dante, USB and analog input/output jacks and ports, and is useful in a wide range of situations. Use this product in conjunction with the bundled VST Rack Pro software to create a flexible, stable plug-in environment.
The Tio1608-D2 is a Dante-compatible I/O rack equipped with 16 mic/line inputs and 8 line outputs. It can control gain from TF Series and DM3 consoles remotely, allowing the construction of a simple stagebox system. The versatile Tio1608-D2 also supports 96k, making it perfect for use as an I/O rack in large installations with products such as the RIVAGE PM or DME7.
The DM7 Compact is a Dante-equipped versatile digital mixing console with unparalleled sound quality, ease of operation, and high reliability that make it perfect for a wide range of applications. The DM7 Compact is configured with 12 + 4 faders and a 1 x 12” + 1 x 7” multi-touch screen, and a rack-mountable with an optional RK1 rack mount kit.
the DM3—the first compact console to be fully compatible with Dante technology, allowing for faster and easier setup with multiple devices. Both consoles feature a multi-language user interface that can be configured to make operation simple and trouble-free for users with different backgrounds and varying skill levels.
Equally at home in a live performance venue or your home studio, it’s easy to imagine taking a DM3 Series console to a gig, recording and streaming the audio, and then taking it home for editing as part of your DAW setup. Alternatively, you could use it as a main mixer for a small performance one day, and as a sub-mixer for live streaming the next—the possibilities are endless.
FEATURES
Packs 22 channels into an ultra-compact digital mixer: 16 mono channels, 1 stereo channel, and 2 stereo FX returns\
9-inch touchscreen and single all-purpose touch-and-turn knob provide easy operation and navigation
Capable of sampling rates as high as 96kHz
6 mono or 3 stereo mixes, 2 matrixes, and 1 stereo bus
16 outstanding mic preamps and 8 convenient analog outputs\
Excellent built-in DSP effects
16 x 16 Dante interface supplies loads of room for expansion\
18 x 18 USB audio interface for playback and recording
2 x 2 recording directly to a USB drive
DAW remote mode with transport control
Custom control via OSC, USB-MIDI, and Yamaha's powerful ProVisionaire software applications
The AVN-DIO20 is a MADI and AES3 to Dante bridging device allowing MADI to connect bidirectionally with AoIP, together with 8 stereo channels of AES3. This simple plug and play audio interface provides a quick and convenient method of connecting legacy MADI equipment to the Dante AoIP audio network.
The AVN-DIO19 audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. All outputs follow the Dante system sample rate.
The AVN-DIO16 is a 4 analogue XLR output to Dante converter in the Sonifex DIO range of Dante input/output devices. It features four balanced analogue XLR outputs and one Neutrik etherCON connector for direct connection to a Dante AoIP network.
The AVN-DIO15 is a 4 analogue XLR input to Dante converter in the Sonifex DIO range of Dante input/output devices. It features four balanced analogue XLR inputs and one Neutrik etherCON connector for direct connection to a Dante AoIP network.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
