Cart
← Back to Product Catalog

TouchMonitor 5 Dante

Audio Monitors

More Details

Similar Products

lectrosonics-duet-iem-system_750px
  • Lectrosonics

Lectrosonics – Duet IEM System

The Duet digital wireless monitor system represents a significant step forward for touring performers and other professionals requiring high definition audio in their ears. With 24 bit digital audio, low latency, Dante inputs and a compact, lightweight, diversity bodypack unit, the Duet system should please even the most demanding users, both on and behind the stage. The Duet digital wireless monitor system represents a significant step forward for touring performers and other professionals requiring high definition audio in their ears. With 24 bit digital audio, low latency, Dante inputs and a compact, lightweight, diversity bodypack unit, the Duet system should please even the most demanding users, both on and behind the stage. The new Duet digital wireless monitor system consists of the M2T dual-stereo half-rack transmitter and M2R diversity belt pack receiver. The Duet covers the UHF frequencies of 470-608 MHz (138 MHz) in a single range, uses digital modulation for transmission, and can accept analog or Dante™ digital inputs. The new system can be considered a "wireless IEM" or a deluxe IFB product, designed and developed with professional touring, installation, theater, filmmaking and broadcast customers in mind. The M2T half-rack transmitter houses two independent stereo transmitters allowing for up to four stereo or dual-mono transmissions in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full size XLR/TRS combo types for balanced line level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise. A Dante Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can cascade the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware. The M2R bodypack receiver employs advanced antenna diversity switching during digital packet headers for seamless audio. The 24 bit digital audio stream guarantees high resolution sound quality with wide dynamic range, low noise floor, and rock-solid stereo image. The headphone jack is fed from a high-quality stereo amplifier with 250 mW available to drive headphones or earphones to sufficient levels for stage performance or other noisy environments. A high-resolution, color LCD allows for a wide range of menu options, including precise limiter settings, using detailed graphics. The M2R runs on two AA batteries for an operating time of over 4 hours with alkaline cells.
    Audio Monitors
  • Dante Ch: 4x0
  • 24-bit
See the product
ctp-systems-DPM802
  • CTP Systems

CTP Systems – DPM802

The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control. The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a volume control. Long Product Description (150 words or less): The DPM802 is a Dante enabled PoE Production monitor unit with eight Dante stereo inputs, one analogue stereo input and both Dante and analogue stereo outputs. The unit includes up to eight frames of programmable stereo delay plus cut, dim and a large volume control. There are two GPI inputs for remote control of cut and dim. The DPM802 has many features that may be programmed via its web page including key colours, delay time, input gains and remote control of functions. For convenience of adjustment the delay time may also be set using just the front panel controls as well as via the web page. The unit includes a redundant network connection which may alternatively be used as a network switch output. The Dante Outputs Left and Right are mirrored on the rear of the DPM802 as balanced XLR analogue outputs for convenient connection to a power amplifier. The two analogue inputs may be assigned to any of the select switches. The unit may be powered by mains or PoE or both.
    Audio Monitors
  • Dante Ch: 16x2
  • AES67 Enabled
See the product
DAD_MOM_Head_On
  • DAD

DAD – DAD Mom

In a world that seems to be gradually moving towards working and mixing 'in the box', there are still situations where hands-on control is second to none.

Monitor control is one of those cases. Enter MOM - our Monitor Operating Module.

MOM is the perfect, tactile match for one or more AVID MTRX, AVID MTRX Studio, AX32, DX32, Penta 720, and Penta 721s units equipped with the PRO|MON|3 monitor control license. The MOM is a remote control, connected via Ethernet, and no audio is actually passing through the unit. The audio-routing magic happens within the AX32 or DX32R and is set up via the DADman software. But once you connect the MOM, the magic now resides right at your fingertips. Main Features:
MOM will give you everything you would expect from a first-grade hardware monitor-controller:

Large Top-Quailty Rotary Knob
Switching Between Different Sources
Switching Between Different Monitor Configurations (from Mono to Atmos)
Mute/Solo Individual Monitor Channels
Talkback
Dim
Cut
Reference Level

    Audio Monitors
See the product