Cart
← Back to Product Catalog

WM-8P

Speakers

More Details

Similar Products

harmonic-design-hd-beam-series
  • Harmonic Design

Harmonic Design – hd Beam-Series

Harmonic Design® beamforming loudspeakers offer great potential for improving sound distribution in complex architectures and highly reverberant rooms. The goal is to focus the sound only on the listener’s surfaces, while shading areas that create unwanted reflections and disturbing room resonances. This leads to a much better speech intelligibility and a first-class listening experience for speech and music performances down to the last rows. Furthermore, the Beamforming technology, which offers a wider range of functions than just Beam Steering, enables unobtrusive positioning of the speakers even in less ideal locations for flexible adaptation to the most diverse requirements.

Beamforming Technology

  • 2In/32Out High-End hd BeamDSP
  • redundant input section with fallback algorithm
  • analog & digital inputs with Dante®
  • AdvancedDirectivityOptimization Algorithmus
  • 384 Taps FIR filter per input/output
  • 16x IIR filter (double precision) per input/output
  • modular equipping in segments of 8
  • 75W Class-D amplifiers with digital input for best SNR
  • ImpedanceControl with fault detection
  • multistage Limiter-Architecture
  • hd LevelZ Remote control software via USB
  • standard colors: black RAL 9005 & white RAL 9010

Models:

  • hd ML8Beam
  • hd ML16Beam
  • hd ML24Beam
  • hd ML32Beam
  • hd PL8Beam
  • hd PL16Beam
  • hd PL24Beam
  • hd PL36Beam
    Speakers
See the product
tannoy-qflex-32ls_0|tannoy-qflex-32ls_0
  • Tannoy

Tannoy – QFlex 32LS

The QFlex 32LS column loudspeakers are designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message.  The QFlex 32LS column loudspeakers are designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message. These new QFlex life safety models are specifically intended to optimise voice reinforcement, and as a result make them more affordable, and therefore applicable, to a wider range of projects.  The QFlex 32LS contains a combination of 4-inch and 3-inch low frequency drivers, distributed over the equivalent length of the QFlex 48, and an eight-way tweeter array of 1-inch drivers. Each driver is individually powered by one of 32 discrete channels of integrated 100 Watt (RMS) Class D amplification and DSP.  The QFlex 32LS offers a horizontal dispersion pattern of 120 degrees and a vertical range of between 5 and 100 degrees, along with a beam steering range of ±70 degrees. Low frequency control is effective down to 200 Hz even with the fewer number and increased spread of drivers that are required for the power saving essential in the life safety environment
    Speakers
See the product
CorelSDK_0004
  • Lucky Tone

Lucky Tone – DANTE 640DUO POE DSP

Dante PoE Speaker can realize its multifunction of the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

    Speakers
See the product