Cart
← Back to Product Catalog

PROA125.2D

Amplifiers

More Details

Similar Products

ED004V3
  • Keiga

Keiga – ED004

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One Rj45 connection for the Dante™ audio signals and PoE power network

* ED-004 supports both IEEE 802.11af/at (PoE/PoE+) and Local DC-In power input

* Supports Dante™ Domain Manger and AES67 compliant

* Auto detect PoE+ (30W) or PoE (15W) power levels

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* 5 LED status display for PoE status and channel signal and peak

    Amplifiers
See the product
  • JBL Synthesis

SMA-4750

The SMA-8300 is a versatile 8-channel Class D power amplifier designed to deliver maximum power while taking up minimal rack space. Each channel is rated to deliver 300W into 8 ohms and adjacent channel pairs can be bridged to deliver 600W into 8 ohms. This flexible channel configuration makes this an ideal amplifier to power LCR, surround, height channel loudspeakers as well as subwoofers in JBL Synthesis immersive audio systems. Powerful built-in DSP allows for custom loudspeaker tuning and full external control allows for complete and easy system integration.
    Amplifiers
See the product
atlasied-dpa804_1200px|atlasied-dpa804_1200px
  • AtlasIED

AtlasIED – DPA804

The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements. The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.The DPA804 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity.  However, the DPA804 can be configured in four-channel mode with either 4Ω or 8Ω load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA804 can be configured for a 70.7V/100V paging/background system on two channels and the other two channels can be used for 4Ω/8Ω foreground stereo applications.The DPA804 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high & low pass filters, and delay to provide flexibility for a range of applications.The output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.
    Amplifiers
See the product