AW-8D


More Details

Similar Products

hs-25_400px
  • VUE Audiotechnik

VUE Audiotechnik – hs-25

Think of the hs-25 as the hs-28’s “bully” little brother, it also deploys our patent-pending Active Compliance Management technology. ACM combines both band-pass and vented alignments into a single enclosure. The hs-25 places two precision-designed, 15-inch transducers into this configuration, with both woofers sharing a common vented chamber. Think of the hs-25 as the hs-28’s “bully” little brother, it also deploys our patent-pending Active Compliance Management technology. ACM combines both band-pass and vented alignments into a single enclosure. The hs-25 places two precision-designed, 15-inch transducers into this configuration, with both woofers sharing a common vented chamber. One woofer’s frontal radiation is direct, while the second woofer’s frontal radiation drives the band-pass chamber. Onboard electronics include amplifier module that supplies 830W pure sine wave power (2000W “peak” power) to each woofer and DSP to ensures the precise phase arrivals of the front facing woofer and both vents. The combination of ACM, sophisticated DSP and active electronics allow the hs-25 to deliver much higher output throughout its operating bandwidth from a footprint that’s smaller than most dual 15-inch vented designs.
    Speakers
amk-DT64-C-X
  • AMK

AMK – DT64-C-X

The AMK DT64-C-X loudspeaker is powered by a POE+ network amplifier with Dante™ / AES67 input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. The AMK DT64-C-X loudspeaker is powered by a POE+ network amplifier with Dante™ / AES67 input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. One PoE+ amplified speaker can power a total of (4) speakers, including (3) additional passive speakers, with one separate audio channels for each speakers. The CX602 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications. This assembly can be used in wide range of projects for paging and background music applications. The DT64-C-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.
    Speakers
ALPoE4.1_frei
  • Aimline

AIMLINE – AL4.1PoE

The AIMLINE AL 4.1PoE column speaker is powered by a POE+ network amplifier with two channel Dante input. No external power supply is required.Thanks to the use of a high efficiently power supply this amplifier is rated with 30 Watts RMS / 60 Watts peak (using a PoE+switch). The enclosure is equipped with 4 x 3,5” speaker and 1” HF driver in a biamped system.The internal powerful 96 kHz DSP gives access to gain, delay, 10-Bd EQ with IIR filter and 24 internal presets. The PANC software controls the DSP in an IP network. This system will solve the issue of having to provide a separate amplifier or I/O interfaces for speaker installations using just a single CAT cable over long distances. This assembly can be used in wide range of projects in multi zones for speech and background music applications.

    Speakers