Dante-enabled Product Catalog

The audio processing center is an audio processor audio processing center with 32 inputs (16 analog and 16 digital) and 32 outputs (16 analog and 16 digital). It is an audio processing center with 16 analog inputs and 16-channel analog output audio processor, using industry-leading ADI DSP SHARC21489, the highest operating frequency can reach 450MHz. The input and output modules of DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the audio processor and transmission needs of various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.

BLA-10 line array system, it is a high-quality multifunctional full-range speaker with variable properties suitable for high-end multifunctional conference halls, small and medium-sized theaters and other high-quality sound reinforcement venues. It can be hoisted to form a line array system , You can also do full-frequency sound reinforcement alone.

Features： 1. The audio signal and power transmission of the speaker are realized through the same network cable. 2. The RJ45 interface on the back panel of the box is equipped with XLR firmware, which can be used for waterproofing and strengthen the connection between the box and the wire. 3. The network cable realizes signal transmission and power supply; 4. The IP address is automatically assigned through the router DHCP; 5. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 1. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 7. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 8. It has complete protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 9. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.

Product Description： 1. Use RJ45 network cable to connect in a "hand in hand" way; 2. Each connection box can connect 4 speaking units; 3. Use professional plugs to connect between the unit and the connection box 4. Hand in hand to connect to a box or directly connect to the conference host through the RJ45 network port interface; 5. The power supply is supplied by the host

The network audio processor is a network audio processor with 28 inputs (12 analog and 16 digital) and 28 outputs (12 analog and 16 digital). It adopts the industry-leading ADI DSP SHARC21489, the highest The working frequency can reach 450MHz. The input and output modules of DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the audio processor and transmission needs of various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.

Single 18-inch active subwoofer

Features： 1. The audio signal and power transmission of the speaker are realized through the same network cable. 2. The RJ45 interface on the back panel of the box is equipped with XLR firmware, which can be used for waterproofing and strengthen the connection between the box and the wire. 3. The network cable realizes signal transmission and power supply; 4. The IP address is automatically assigned through the router DHCP; 5. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 7. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 8. It has complete protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 9. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.

Features： 1. Comes with 2 RJ45 interfaces, adopts digital audio transmission and control technology, has good anti-GSM interference ability, and has good sound quality guarantee; 2. Using a detachable microphone pole, simple operation and convenient product maintenance. 3. Condenser microphone with green ring indicator light, easy to distinguish speaking and waiting status 4. In the entire conference system, the chairman unit has priority to speak, and can mute/close the speech of any representative unit that is speaking, so that the chairman unit can effectively control the order of the meeting place 5. Good anti-GSM interference ability

The audio processing center is an audio processor with 24 inputs (16 analog and 8 digital) and 24 outputs (8 analog and 16 digital), using industry-leading ADI DSP SHARC21489, the highest operating frequency can reach 450MHz. The input and output modules of DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the audio processor and transmission needs of various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.

Single 12-inch two-way two-unit active full-range speaker

Features： 1. Easy to install, low cost, less noise; 2. No need to cut the ceiling panel or insert the bottom box on the back, directly replace the original gypsum board 3.60X60 flat panel design, can be personalized inkjet pattern 4. With 360° sound field coverage, it can emit high-fidelity and clear sound; 5. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics; 6. The integration of power over Ethernet and audio data transmission realizes simplified cable layout and conforms to Ethernet engineering specifications. 7. Automatically assign IP address through router DHCP; 8. It can independently control each receiving channel, and can be applied to any location in the local area network 9. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 10. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.

Features： 1. Good anti-GSM interference ability; 2. Using a detachable microphone pole, simple operation and convenient product maintenance; 3. Condenser microphone with double color ring indicator light, easy to distinguish speaking and waiting status; 4. Comes with 2 RJ45 interfaces, adopts digital audio transmission and control technology, and has a good sound quality guarantee; 5. In the entire conference system, the chairman unit has the priority to speak, and can mute/close the speech of any representative unit that is speaking, so that the chairman unit can effectively control the order of the meeting place.

The audio processing center is an audio processor with 16 inputs (8 analog and 8 digital) and 16 outputs (8 analog and 8 digital). The industry-leading ADI DSP SHARC21489 is used, and the maximum operating frequency is up to 450MHz. The input and output modules of DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the audio processor and transmission needs of various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.

Single 12-inch two-way two-unit active full-range speaker

Features： 1. The frameless design of the mesh cover makes it fit the wall and ceiling better; 2. The network cable realizes signal transmission and power supply; 3. Automatically assign IP address through router DHCP; 4. Each receiving channel can be controlled independently, and can be applied to any location in the local area network 5. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 6. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.

Features： 1. Equipped with 5 groups of RJ45 loopback signal acquisition interface, "ring hand in hand" connection, the system is more reliable 2. Conventional network cable (Cat5e or Cat6) connection between each unit is convenient and quick 3. Each group of lines can connect 30 units, a single machine can connect 150 units, and an expander can be added to connect more units 4. Support WiFi for all control functions of the central processor 5. Support Dante network transmission, and additionally support three-way LINE/MIC input Dante network, which can be set through software 6. Remote control and remote assistance can be carried out through the TCP/IP network interface 7. Support meeting function: discussion 8. Support system hot swap 9. Support RS232 central control control, and have two-way code sending function, realize seamless connection with intelligent central control system 10. Support external audio input and recording output port 11. Support access port for conference call 12. The system can be set to lock or release the function of the microphone operation, and each unit has an electronic volume adjustment function. 13. Multiple speaking modes: first in first out, last in first out, automatic mode, discussion mode, chairman mode 14. With voice control to turn on the microphone function and speech time limit function (optional 1-999 seconds) 15. Connect to the computer to simulate the scene layout of the on-site meeting, and you can click to turn on or off all the unit microphones at any time 16. The host adopts LCD operation interface (3.5 inches), which can switch various national languages and display perpetual calendar

The audio processing center is an audio processor with 8 analog inputs and 4 analog outputs, using the industry-leading ADI DSP SHARC21489, and the highest operating frequency can reach 450MHz. The input and output modules of DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the audio processor and transmission needs of various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.

Single 10-inch two-way two-unit active full-range speaker

Features： 1. The frameless design of the mesh cover makes it fit the wall and ceiling better; 2. The network cable realizes signal transmission and power supply; 3. Automatically assign IP address through router DHCP; 4. Each receiving channel can be controlled independently, and can be applied to any location in the local area network 5. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 6. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.

• Exquisite and minimalist structure design, highlighting the modern atmosphere, accord with ergonomics; • Special electret capacitive dual microphone core design, clear and bright sound quality, high sensitivity; • Equipped with a 2-inch high-definition true color screen, which can display the battery level of the microphone, the signal strength, the working status of the microphone, the grouping and ID number of the channel where the microphone is located. Use wireless radio frequency technology to transmit audio signals and control management signals; • With the camera tracking host, after using the computer preset, the camera can be automatically tracked; • Original microphone directivity variable technology, the user can adjust the microphone directivity according to different environments, locations, meeting methods, and the needs of the speaker, so as to achieve an optimal pickup effect. It supports 5 modes: omnidirectional, Cardioid directivity, super-cardioid directivity, sharp heart directivity, figure 8 directivity, etc.; • The chairman has priority button function and chairman priority mode; •• Anti-interference from mobile phone microphone core, stable connection, durable and reliable; Ultra-low power consumption circuit design, built-in large-capacity lithium battery, can be charged through the charging box; Cooperate with the host to realize network audio transmission and realize audio signal interconnection and intercommunication; • The conference unit has a unique serial number, and the conference system can automatically assign an ID to the conference unit.

The network audio processing center is a network audio processor with 8 inputs (4 analog and 4 digital) and 8 outputs (4 analog and 4 digital), using the industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can reach 450MHz. The input and output modules of DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmission in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.

1: It is an efficient vertical line array system suitable for high-quality sound reinforcement places such as high-end multifunctional conference halls, small and medium-sized theaters and theaters. The high frequency part adopts the unit module of PET patented acoustic lens conversion technology, which does not have the typical polar convex angle (beam control) effect of traditional horn and woofer when used together. The precise design makes each frequency band perfectly match, at any frequency The overall wavefront coherence is ideally matched, so that the sound of the same sound quality is from near to far in the entire sound field. 2: BL-205 provides a precise coverage angle, which can be composed of multiple modes of systems to meet the needs of sound reinforcement in different places; the horizontal coverage angle is 90°, and the vertical coverage angle is 0°-10°, for the sound reinforcement system designer Provides a precise multi-purpose installation system. Its balanced integrated suspension system makes installation quick and easy and labor-saving. Unit configuration: 2 x 5 inches mid-bass +1 x 1.44 inches strong magnetic plane wave generator 3: L-205 speaker features: the cabinet structure uses high-quality 15 cm plywood, acoustic simulation calculation combined with speaker characteristics to form a closed sound system, its advantage is that the scientific use of acoustics and aerodynamics makes the entire speaker controllable Performance, sound pressure level, and horn service life have been greatly improved, achieving high sound pressure for small horns, and setting effective and complete protection devices in the speaker system, so that the speaker group will not burn out under relatively high sound pressure for a long time. 4: Applicable venues: small stadiums, small performance systems, theaters, concert halls, performing arts centers, conference centers

Features： 1. PoE power supply; 2. Soft key-type user switch to avoid mechanical sound when switching the microphone; 3. The entire expandable Dante system has 512 two-way audio channels; 4. Use a network cable to connect to the switch; 5. There are a variety of switch modes to choose from, a variety of gains are available, and a low-cut switch; 6. Equipped with a 3-pin XLRF canon female socket, suitable for quick installation of any XLRM canon male output gooseneck microphone; The sturdy casing cast by die casting and the non-slip silicon foam at the bottom of the microphone holder can reduce the impact of desktop vibration on the microphone.

Features： 1. The wireless conference system eliminates cumbersome wiring, is quick and easy to install, and is simple to operate. It is especially suitable for use in scenarios such as project transformation, mobile conferences, temporary equipment increase, and wiring failure. The system adopts digital and analog fusion design, can realize the camera tracking function, embedded DSP audio processing technology, 4-inch touch screen management and settings, easy to use and intuitive, cooperate with the AOIP network audio transmission module to achieve audio signal interconnection, and the module supports mainstream networks Audio transmission protocol. 2. The wireless radio frequency technology transmits audio and digital control signals, with high-fidelity sound quality, no compression, clear and transparent, and the wireless control signal is reliable and stable; 3. Support camera tracking function, can connect to the camera through RS485, RS232, etc., support VISCA, PELCO-D/P camera control protocol, and can independently connect a camera for camera tracking; 4. It has a video switch RS232 communication port, which can be connected to a high-definition video switcher or a high-definition matrix, and supports up to 8 cameras for camera linkage; 5. Built-in high-speed DSP processor, based on artificial intelligence self-learning algorithm developed adaptive feedback suppression (AFC) and automatic noise reduction technology (ANC), deep learning analysis of the feedback signal that causes howling, and quickly eliminate the cause of howling Repetitive signals, learning and analyzing environmental noise, background noise and current sound, etc., to remove useless noise 6. The host supports a variety of conference modes: such as first-in first-out, chairman priority mode, the number of open microphones supports 1-4, and the system can carry up to 128 microphones; 7. The directivity can be adjusted with the microphone, supporting 5 modes: omnidirectional, cardioid directivity, super cardioid directivity, sharp cardioid directivity, figure 8 directivity, etc.; 8. Extend AOIP network audio transmission to support mainstream. The refined and elegant 4-inch touch screen is used for conference host management and settings, and can display the following information at the same time: a. Speaking mode selection, speaking quantity limit function b. Radio frequency grouping and radio frequency signal strength display c. AFC adaptive feedback suppression is turned on and off, d. ANC automatic noise reduction on and off e. System volume adjustment f. System settings and status view, switch between Chinese and English 6. Network transmission protocol, realize audio signal interconnection and intercommunication

DT22 is a compact 48kHz/96kHz Dante interface enabling convenient placement of 2 mic/line inputs and 2 line outputs wherever you need to get analogue audio in and out of a Dante network. Equipped with standard Phoenix / euroblock connectors, DT22 is designed for fixed installation and can be easily mounted under a meeting table, for example in a breakout room or huddle space, under a podium for local mic/PC and speaker connection, or rack-mounted to interface with analogue equipment such as an AV switcher.

The compact and portable DT02 converts two channels of Dante audio to a pair of XLR line-outputs, enabling simple break-out to analogue equipped hardware for install and live applications.

The compact and portable DT20 converts two analogue inputs, via combo XLR-Jack, to two channels of Dante audio, enabling hassle-free connection of analogue sources to a Dante network for install and live applications.