Cart
← Back to Product Catalog

BARE – BKF-12

I/O Interfaces

More details

Similar Products

0114727_unterputzanschluss-mit-2x-cinchbuchsen-output
  • promedias

promedias – proDT CO UP

Flush-mounted connection with 2x cinch sockets output from Dante, EDIZIOdue

  • AES67 & DDM ready!
  • 0x2 LINE OUT (Cinch Stereo female)
  • PoE / 5VDC Input
  • Stereo L+R DANTE® Broadway
  • Sample Rate: max. 192kHz | Latency: min. 0.25ms
  • Network Speed: 1Gb/s / 100Mb/s
  • Dimensions: Gr. I (1x1) - 88x88x59mm bzw. 50mm
  • Installation dimensions: Ø64x44mm bzw. Ø60x44mm (cutout x depth)
  • Color: white (Feller 61), similar to RAL 9010 (also available as standard, e.g. black 60 or option RAL/NCS colour!)
    I/O Interfaces
See the product
audioscience-16-16m_1200px|audioscience-16-16m_1200px
  • AudioScience

AudioScience – Iyo 16.16M

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.16M provides 16x16 balanced analog audio inputs and outputs. The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.16M provides 16x16 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status. The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller. Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack. All units can also be operated in AES67 interoperability mode.
    I/O Interfaces
  • Dante Ch: 16x16
  • 24-bit
See the product
A164D_WALL_DanteLogo_3
  • DiGiCo

DiGiCo – Dante A164D WALL LCD

The A164D Wall LCD is a 16 input 4 output I/O Expander that uses the Dante network protocol to provide fixed, additional I/O anywhere on a network and is designed for wall or floor mounting. It comes with 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at both 48K and 96k sample rates and it is AES67 compatible. Primary and secondary Dante ports come with locking EtherCON connectors and can run in both redundant and switched mode. All LCD labels are dimmable and can be customised using Dante controller software.

    I/O Interfaces
  • Dante Ch: 16x20
  • 24-bit
See the product