Cart
← Back to Product Catalog

promedias – proDT CO UP

I/O Interfaces

More details

Similar Products

mla_200_p_thumb_3208675bd3e89e0d11e58c2e0a57e1c8
  • Yamaha

Yamaha – MLA-200

Interface for the Yamaha Music Laboratory System.

  • Compatible with Audinate's Dante audio network standard.
  • Achieves high sound quality and smooth communication.
  • Attachment can be used to connect to a desk and to the leg of a Yamaha digital piano as well.
  • Can be placed without taking up space.
    I/O Interfaces
See the product
iTrans DX-22-EUK
  • infobit

iTrans DX-22-EUK

Infobit has debuted its new XLR Dante wallplate- iTrans DX-22-EUK. FEATURES: ·       2x Inputs + 2x Outputs (Dante® in and Dante® out) ·       Balanced/unbalanced XLR analog audio ·       MIC Phantom 48V Power and on/off via a hard button ·       Input sensitivity and output gain control to adjust for different levels of MIC/XLR ·       Dante® audio sampling rate supports 44.1/48/88.2/96KHz@24bit ·       Configurable Dante® device latency (supports 1, ,2 or 5ms configurable using Dante® Controller) ·       Supports AES67 RTP audio transport ·       EU and UK versions all-in-one design ·       With a magnetic cover, easy to install. ·       PoE & local power options
    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit
See the product
glensound-dark8adi
  • Glensound

Glensound – DARK8ADI

The Dark8ADI provides 8 line level analogue audio inputs and 4 x AES3 (8 audio channels) inputs to your Dante network. Like our other Dark units it has redundant network interfaces and redundant power supplies. The DARK8ADI (Analogue & Digital Input) is a very powerful Dante®/ AES67 network audio interface, in a robust 1RU 19" subrack It has a 8 off low noise analogue line inputs and 4 off transformer balanced AES3 digital audio inputs. These inputs are transmitted on a fully redundant Dante®/ AES67 network interface. In total 16 audio circuits are sent to the Dante®/ AES67 network. Eight of these circuits are always derived from the 4 x AES3 inputs, the other eight are automatically switched between the AES3 and analogue inputs. If the Dark8ADI detects valid AES3 signal on a channel then this will be routed to the network output, if no valid AES3 is detected then the analogue input will be routed to the network output instead of the AES3. The rugged design, redundant mains powering & redundant network facility of the unit means that it can easily be placed and left unattended wherever audio sources are required.
    I/O Interfaces
  • Dante Ch: 0x16
  • 24-bit
See the product