BARE – DCS-100M


More details

Similar Products

s-track_logo
  • S-Track

S-Track – Ostrich D88

Ostrich series of products is an audio interface device based on Dante international general protocol. It can realize analog audio signal input, convert to digital audio signal output, route to any Dante audio transmission network device by Dante protocol, and realize high quality, long distance and low delay signal transmission. It supports the access of any Dante network digital audio, which can be converted into analog audio signal output, and can be connected to traditional analog audio devices such as mixer, power amplifier, processor and so on. The device uses high quality AD/DA signal conversion chip, provides 48 V of phantom power supply, and can access higher quality capacitive microphone.

    I/O Interfaces
ASL-ENC-1101_1200px|ASL-ENC-1101_1200px
  • ASL

ASL – ENCHORUS ENC 1101

The ENCHORUS ENC 1101 Dante™-based audio network module offers eight AES3 outputs with individual delay (at a maximum of 2.7 seconds) and four AES3 inputs, with a four-band equalizer on each input and output. The ENC 1101 features eight built-in mixing engines and support for sample frequencies up to 192kHz. The device is easy to control and monitor through a web interface. A built-in audio matrix allows flexible routing of all inputs, outputs, and mixer signals. The ENCHORUS Dante™-based audio network was designed specifically for stage applications, offering professional connectors and superior audio quality. All ENCHORUS models include filtering and mixing capabilities and can be configured very rapidly via the integrated web interface. ENCHORUS modules are tough enough on their own but also include rubber bumpers that allow them to be easily and safely stacked on stage.
  • Throw-down Box
  • 8x AES3 outputs with delay (max. 2.7 sec.)
  • 4x AES3 inputs
  • Support of redundant Dante networks or daisy chainable
  • Four-band EQ for each input and output
  • 8x built-in mixing engines (16 inputs, stereo output)
  • Built-in audio matrix for flexible routing of all signals
  • Control via web interface
  • Sample rates: 44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz
  • Sample rate converter on AES3 inputs from 8kHz to 192kHz
  • 19” rack-mounting kit available
    I/O Interfaces
Penta_720_front_rear_1600
  • NTP

NTP Technology – PENTA 720

Next-Generation Enterprise, Modular Router and Interface System'

Key Features
8 AES/EBU I/O and 1-3 MADI I/O
8 card slots for analog and digital I/O cards supporting hot-swop
IP audio L3 Ethernet I/O powered by Dante
TCP/IP control via NTP Router Control System and Stand alone control applications for PC
Single or Dual power supply
Key Benefits
Analogue and Digital audio interfacing
Each of the 8 expansion slots can be independent or combined domain properties. Allowing separate sample rate, clock sources and IP Submask independence.
Interfacing and routing of embedded audio in video SDI SD/HD/3G signals
Flexible patching and routing of digital audio signals providing
Stand alone IP audio interface and format converter
Interface for NTP TDM router systems
Low latency, tightly synchronised, transport of uncompressed audio over IP networks using off the shelf switches

    I/O Interfaces
  • Dante Ch: 64x64
  • 44.1kHz-192kHz