Cart
← Back to Product Catalog

BARE – BKF-10

I/O Interfaces

More details

Similar Products

arx-netsplit_1200px
  • ARX

ARX – NetSPLIT

The ARX NetSplit is a unique ‘Dante / Analog Splitter that is switchable into Dante mode or Analog mode. The ARX NetSplit is a unique ‘Dante / Analog Splitter that is switchable into either of two modes:
  • In Dante mode it will extract 2 channels of digital audio from the network via aRJ45 Ethernet input, and split them to 2 channels of 1:4 splitter
  • In Analog mode it can take 2 channels of Analog audio, and split them to 2 channels of 1:4 splitter
The NetSplit can receive audio channels from a Dante network and provide studio quality, low latency audio via balanced XLR output connectors to analog audio equipment. Thus any audio available on the network can be routed via the NetSplit to an amplifier, powered speaker(s), mixing console, digital signal processor and many other analog audio devices.
    I/O Interfaces
See the product
fp-nml2_400px
  • RDL

RDL – FP-NML2

The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio amplifiers or equipment to a Dante network. Model FP-NML2P operates from PoE. The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio power amplifiers, or other audio equipment, to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. The FP-NML2 operates from 24 Vdc and is available in a PoE version: FP-NML2P. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product
dsppa-dt2200-2x2_0|dsppa-dt2200-2x2_0
  • DSPPA

DSPPA – DT2200

DSPPA's DT2200 is a 2x2 Dante audio input and output terminal. DSPPA's DT2200 is a 2x2 Dante audio input and output terminal. Features
  • Support universal Dante protocol, can work with other Dante devices;
  • With switch to select between Mic input and Line input of phoenix interface;
  • With adjustable knob for volume control of Mic & Line;
  • Compact design, suitable for wall and rack mount (3 pcs);
  • Support POE power supply, flexible for installation;
  • Support both Dante control software & DSPPA 
    I/O Interfaces
See the product