The PowerCore DPA-220 amplifier with Dante Embedded Platform (DEP) technology sets a new standard for performance, size, durability and features – from one of the industry’s most trusted brands. This rugged and compact Dante™ enabled PoE high-performance audio amplifier delivers up to 20W into a pair of 4-8Ω speakers or 40W into a single 4-8Ω speaker.
The PowerCore DPA-220 is playback-ready out-of-the-box in a simple audio pass-through mode. An integrated web server allows the system integrator to set the gain during installation. New standard for performance, size and durability Latest generation POE support Embedded Linux platform Updated technology blocks, improved design architectures Longer life, more reliable components Rugged and compact design Innovative integrator-friendly features Advanced network and audio protocol support Faster installation, in more places with fewer call-backs API support for custom integrations Integrated web server for ease of use during deployment Wide range of input power supply options Compact size: 131mm x 46mm x 39mm
Lake People Phone-Amp G103D4 is a headphone amplifier intended for DANTE networks.
The G103D4 model comes with a DANTE 4/4 input and two independent stereo amplifiers. 24 Bit / 192 kHz D/A converters with a Signal-to-noise ratio >105 dB and THD+N as low as 0,002 % are driving the powerful headphone amplifiers. These are best suited to drive any headphones from low to high impedance and with low or high sensitivity. To adapt the amp to demanding headphones, to further reduce the noise level or to maximize the travel of the volume control, the gain is internally adaptable by Dip-Switches to optimize the amp;
The DANTE digital audio signals are input via a standard RJ45 connector. Lake People G103D4 will accept 4 audio channels. The unpacked audio signals are input to two high quality D/A converters. The recovered analogue signals are buffered, attenuated in the analogue domain and then sent to powerful headphone amplifiers. If required, additional gain of +6 dB or +12 dB can be set by Dip-Switches inside the amp. Each amp section offers a 1/4” and 3.5 mm phone jack which may be used simultaneously.
Power supply for the amp is accomplished either by PoE (Power-over-Ethernet) or by a USB wall plug adaptor (not supplied) with USB-B or USB-C connector. The case, front and back panel of G103D4 is made of rugged black anodized aluminum, the lettering is laser engraved. The volume knobs are also made of solid aluminum.
Introducing the CONNECT 1504D high-power IoT-enabled smart amps. This four-channel model drives 1,500 watts per channel (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms). This addition to the CONNECTSERIES amplifiers is available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. With three different methods of network connection, users can connect using the amplifier’s built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.
Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.
Dante audio distribution. 3 outputs, 750 W per zone. Switchable 70 V/100 V into 8 ohm/4 ohm outputs. Matrixable inputs. Powerful web interface with DSP Control
The 5D is a Class D installation amplifier with flexible power distribution among its four output channels. It uses Digital Signal Processing (DSP) to incorporate loudspeaker-specific configurations for smaller loudspeakers from E-Series, xS-Series, xC- and T-Series, as well as equalization and delay functions.
The 2 RU four channel D20 amplifier is ideally suited to mobile and installation applications which require low to medium Sound Pressure Level (SPL) capabilities.
The PowerZone™ Connect 2U series is a line of ultra-reliable, full-matrix DSP-enabled Class-D amplifiers that delivers exceptional system configuration and flexible output, with a total system power ranging from 1000 W to 6000 W.
The PowerZone™ Connect 2U series is a line of ultra-reliable, full-matrix DSP-enabled Class-D amplifiers that delivers exceptional system configuration and flexible output, with a total system power ranging from 1000 W to 6000 W.
The PowerZone™ Connect 1U series is a line of DSP-enabled Class-D amplifiers designed to simplify the lives of system installers, providing unmatched reliability, efficiency, and exceptional system configuration.
The PowerZone™ Connect 1U series is a line of DSP-enabled Class-D amplifiers designed to simplify the lives of system installers, providing unmatched reliability, efficiency, and exceptional system configuration.
Our NPA20DA networked power amplifier delivers advanced audio integration within a commercial or residential AV installation.
The NPA20DA features a 2 x 10W digital amplifier (1 x 20W mono) audio output and Dante® audio integration.
The NPA20DA can be powered via PoE or PoE+ from a compatible network switch, or locally should the switch not support PoE. The unit also includes the ability to lower the amplifier power output subject to PoE capabilities, DSP with a 31 band EQ, audio delay for lip sync correction, and control via front panel, RS-232, TCP/IP, web-GUI or 12V trigger.
Our NPA70DA networked audio zone amplifier delivers advanced audio integration within a commercial or residential AV installation.
The NPA70DA features a 2 x 35W digital amplifier (1 x 70W mono) or 70V / 100V hi-level constant voltage output and Dante® audio integration.
The NPA70DA can be powered via PoE++ from a compatible network switch, or locally should the switch not support PoE++.
The unit also includes the ability to lower the amplifier power output subject to PoE capabilities, support for combined or independent LAN and Dante® connections, DSP with a 31 band EQ, audio delay for lip sync correction, and control via front panel, IR, RS-232, TCP/IP, web-GUI or 12V trigger.
The Dante 2-Channel Power Amplifier 240W (Model 500553) features a Dante slot card that accepts the digital signal from the Dante network and converts it to an analog audio signal using it as the input source of the amplifier. Simply use “Dante Controller” to route a signal from source devices that are on the same Dante network. Its space-saving 1/2 rack design allows for quick installation and provides flexibility to mix and match with other 1/2 rack products to save valuable equipment rack space.
This powerful class D amplifier is combined with features such as 12V trigger control, audio-sensing, volume gain adjustment, short circuit protection and overheating protection.
The AVN-AH8 multi-channel headphone amplifier is a 1U rack-mount which distributes 2 sets of stereo audio to up to 8 different sets of headphones, fed from the Dante AoIP network. A typical application might be to provide common headphone feeds for guests in a radio studio, coming directly from the AoIP network.
Each output has front panel unbalanced 1/4” & 3.5mm jack sockets and a rotary level control. The front panel potentiometers adjust the headphone volumes from mute (fully anticlockwise) to 0dB of gain when fully clockwise. This is useful if the Dante stream level is low or high and requires adjusting.
There are 8 parallel 1/4” jacks on the rear panel, for ease of wiring if the unit is installed in an enclosed rack.
Each of the 8 professional headphone outputs can each select between 2 stereo Dante sources which are routed via Dante controller. The level of each stereo Dante stream can be adjusted ±12dB using one of the two front panel rotary controls. The unit supports AES67 operation and is Dante Domain Manager compliant.
The AVN-AH8 front panel contains a power (PoE) LED, a DC LED, a network link status LED, and a clock LED. A recessed reset switch is also provided.
The unit is powered via Power over Ethernet (PoE) or a 12VDC input via a locking 2.5mm DC Input, 2A minimum rating.
The C14-2 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology.
C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
The C10-2 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology.
C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
The C10-1 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology.
C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
The C7-2 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology.
C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
The C7-1 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology.
C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
The C5-2 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology.
C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
The NPA100DA features a 2x 50W digital amplifier (1 x 100W mono) or 70V / 100V hi-level constant voltage output, dedicated LFE subwoofer output, Dante audio integration and 2ch balanced / un-balanced audio outputs.
The Kommander-KA18 is a fully-featured, 8x 150W @ 4Ω amplifier platform with DSP highly integrated into the K-array collection ecosystem.
The Kommander-KA18 offers pristine sound and complete control over the connected loudspeakers, either as a stand-alone driving unit or in conjunction with other K-array amplifiers in complex and demanding applications.
Pi is a multipurpose series of power amps for touring and installation applications, based on the legendary QuantaPulse™ switching mode power supply with an innovative class H 3 steps topology.
This series includes a completely renewed PMS™ which incorporates a set of protection systems in power supply and audio modules which works in real time continuously maintaining all variables of the amp within safe working threshold always. So, Pi amps are appropriate machines for the most exigent applications with the best reliability.
Pi amps have been designed with a non-symmetrical class H topology which allows working with very high voltages given incredible headroom and a great punch.
All these characteristics make Pi amplifier an interesting device to work with asymmetric loads to squeeze every last drop of power in each way of the sound system.
Pi series has an extra-large 4.3″ IPS display with capacitive touch panel whereby it is possible to control and manage every parameter of the amp and select all System Presets, Uses, User EQ and Snapshots created.
Also a powerful FIR DSP has been implemented in these amps with a software specifically developed for this series.
Pi is a multipurpose series of power amps for touring and installation applications, based on the legendary QuantaPulse™ switching mode power supply with an innovative class H 3 steps topology.
This series includes a completely renewed PMS™ which incorporates a set of protection systems in power supply and audio modules which works in real time continuously maintaining all variables of the amp within safe working threshold always. So, Pi amps are appropriate machines for the most exigent applications with the best reliability.
Pi amps have been designed with a non-symmetrical class H topology which allows working with very high voltages given incredible headroom and a great punch.
All these characteristics make Pi amplifier an interesting device to work with asymmetric loads to squeeze every last drop of power in each way of the sound system.
Pi series has an extra-large 4.3″ IPS display with capacitive touch panel whereby it is possible to control and manage every parameter of the amp and select all System Presets, Uses, User EQ and Snapshots created.
Also a powerful FIR DSP has been implemented in these amps with a software specifically developed for this series.
Linea’s 88C Series of eight channel amplifiers are optimised for use in installations. Combining massive power and peerless audio performance with unique DSP, the 88C Series also incorporates many features that ease it’s integration on to both new and legacy systems, the 88C Series represents an unmatched advancement in amplifier technology.
Sharing the same feature set and form factor as Linea's 44C Series of four channel amplifiers the 88C Series is available in models that develop between 400Watts and 2,500 Watts per channel (up to 5,000 Watts for a bridged pair). Unusually these are not, ‘transient’, ‘burst’ or ‘peak’ power figures, they are the power levels that are delivered by all channels simultaneously even when driven with the same dense program material.
With Linea amplifiers there is no need to ration power between channels, you can use all the power you have paid for all the time. This has been independently verified.
Linea can do this because state of the art components and a finely optimised design results in an amplifier that is between 7% and 10% more efficient than any competitive product. This efficiency gain directly translates in to the generation of about half the wasted energy (heat) which is clearly significant. In addition to reducing energy costs high efficiency results in generous power reserves ensuring that pristine sound quality is maintained even under the most extreme conditions.
Ethernet is used for remote control and monitoring while the tamper proof front panel allows easy verification of the operating status and signal levels. Control via Linea’s intuitive Podware PC application provides many convenient and time saving features such as very flexible management of presets, and Overlay grouping of Mutes, Gains, Delays and EQ across an entire system. Control from 3rd party systems is also possible via TCP/IP, RS232 and RS485 while comprehensive relay and contact closure ports ensure that basic control can be achieved very easily.
The advanced 96kHz DSP is fully integrated into the product and provides an array of unique and genuinely useful features. Because all aspects of the DSP algorithms are designed and hand crafted in house by Linea, they are not available on products from any other manufacturer. For example, LIR linear phase crossover filters which are as easy to use as more conventional filter shapes, and have less latency than FIR filters. Also the powerful VX Limiter suite which sports Peak, RMS and Excursion limiting, as well as multiband limiting for passive 2-way enclosures.
The CA 4D is a 4 channel MOSFET amplifier with controller card system configuration technology, using digital controller cards D MOD or F MOD. Both exclusively supporting the KS AUDIO FIRTEC™ finite impulse response technology. When changing controller cards or when loading a new program from the internal memory both the inputs and the outputs are appropriately configured to reflect the correct set up.
Whether or not the system is configured as 4 single channels – 2 channel / 2 way – 2 channel with mono Sub woofer – 2 channel mono bridged high power sub woofer – 1 channel 3 way - L and R SAT configuration, nearly every combination of KS AUDIO speaker systems is possible. This allows for a wide field of application, from small and medium size concert sound reinforcement to speech reproducing at the highest quality.
The CA 4D is equipped with 4 independent analog FET power amp modules. Two of them deliver a continuous sinewave power of 700 watts into 4 ohms each. While the other two modules deliver half that power. The controller card and an applicable program determines the distribution of power to always deliver the maximum available. The high performance of the CA 4D amplifier is achieved by three balanced supply voltages. The power losses are substantially less than with any other conventional analog power-amplifier designs. A total of 40 quality selected power MOSFET transistors, deliver a maximum headroom. Soft clipping circuits working in conjunction with
the operating voltage, limit the NF signals and therefore enable the power amps to always work with a high damping factor as well as remaining fully regulated.
The power supply is a state-of-the-art, heavy duty wide-range switch mode design, with Power-Factor-Correction (PFC) built in. The start-up current is limited to assure maximum protection. A second power supply is used to independently supply the controller card electronics along with the low voltage cooling fans and to operate the stand-by switch. Excess temperature is dissipated by 2 fans. The air is taken in from the front panel inlet thru an easy to clean filter. It is passed through to the back panel outlet, while passing over the heat fins and the power transformer to cool these units down to nominal operating temperatures.
On the front panel there are 4 mute switches corresponding to the 4 channels of the amplifier. Each of these switches has a red LED below it to indicate the mute status. On the rear panel there are 4 Neutrik speakON output connectors. Their status is indicated by 4 green LEDs. The mains cable is connected via a PowerCon.
The housing is constructed of 1.5mm thick steel while the 19′′ front plate is constructed of 4mm thick anodized aluminum and has 2 handles for ease of use.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
