CloudPower CP716D


More Details

Similar Products

leonis-SMA-OBIA2
  • Leonis Cinema

Leonis Cinema – SMA-OBIA

LIDSA32 (Immersive Digital Surround Amplifier-32 Channels) belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. SMA-OBIA belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. Each digital-analog conversion will produce a loss of sound, SMA-OBIA link reduces DAC conversion link. So our structure is more rational, more integrated. The sound of the output will be direct, dynamic amplitude larger, transient better. It effectively overcomes defects of the traditional analog amplifier (such as big volume, big distortion, low power efficiency, etc.). Its power utilization rate can be up to 95%. Features:
  • High integration,32 channels output
  • High power output, attain to cinema level
  • Digital input interface
  • 32 channels analog output
  • Over-current protection, overvoltage protection, over temperature protection
  • Adjust acoustic gain, status display, BTL-PBTL mode switch of per channel by network protocol
    Amplifiers
  • Blaze by Sonance

PowerZone™ Connect 6008D

The PowerZone™ Connect 2U series is a line of ultra-reliable, full-matrix DSP-enabled Class-D amplifiers that delivers exceptional system configuration and flexible output, with a total system power ranging from 1000 W to 6000 W. The PowerZone™ Connect 2U series powers both conventional low-impedance (2 Ω to 16 Ω) loudspeakers and constant voltage (70 V/100 V) transformer-coupled loudspeakers, and features proportional distribution in both Lo-Z and Hi-Z modes. Specific models of the PowerZone™ Connect 2U amplifiers offer compatibility with Audinate Dante™ AoIP networks and installations. Our intuitive PowerZone™ Control web app is built into all our PowerZone™ Connect amplifiers for easy system setup. PowerZone™ Control facilitates effortless customization of even the most challenging audio/voice systems by delivering many DSP configuration options and tuning features, including multizone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker presets, delay, Wall-S1 controller configuration, Sine generator, and much more.
    Amplifiers
201982132038
  • BARE

BARE – WD60U

The network audio power amplifier integrates a four-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

  • Built-in 4 x 600W / 8 Ω ( 800W / 4 Ω) digital power amplifier
  • Professional PC- side control software is easy to use, Ethernet TCP / IP online management, can manage every device in the system at the same time
  • ★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality
  • Network dual backup, multiple devices can be connected hand in hand.
  • ★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
  • Automatic protection memory function in case of power failure
Output Power
Output power 8 ohms: 4x600W
Output power 4 ohms: 4x800W
Bridge mode 8 ohms: 2x 1600W
Power amplifier
Maximum efficiency of 90%, two-channel digital power amplifier
Frequency Range
20Hz-20kHz
Signal to noise ratio
100dB / 95dB
Sensitivity
26dB / 1.4V / 32dB
Crosstalk
> 90dB
Damping coefficient
> 500
Voltage gain
40dB
Total harmonic distortion
< 0.1%
Voltage conversion frequency
> 70
Conversion time
<1.5
Features
Input: 2 DANTE signal inputs
Protect power
Single channel: short circuit, DC output, low impedance; equipment: ultra low / high voltage, temperature, overload
Operation mode
Stereo, mono, bridged
interface
Input: 2 x RJ45 Output: 4 x XLR (up to)
Unit delay
<1.5ms
sampling
48k
Dimensions (WxHxD) mm
485x90x320mm
Weight (kg)8kg
    Amplifiers