Cart
← Back to Product Catalog

PowerZone™ Connect 6008D

Amplifiers

More Details

Similar Products

i60D_mit_Steckverbinder_frei_0
  • Klangwert

KLANGWERT – i60D PoE+ amp

KLANGWERT PoE+ 2-channel amplifier with DSP.

The KLANGWERT PoE+ amplifier includes a Class D amplifier. Thanks to the use of a high efficiently power supply this amplifier is rated with 2x30 Watts RMS / 60 Watts peak (using a POE+ switch) into two channels. Inputs and outputs can be configured in different ways.

The internal powerful DSP board gives access to gain, delay, 10-Bd EQ with IIR filter and 24 internal presets.

The DSP is controlled by the PANC software in an IP network. All active AIMLINE and KLANGWERT digital systems can be controlled using just one software. Made in Germany

24V Power supply optionally available

Dimensions: 85 x 150 x 26mm (excl.connectors)

    Amplifiers
See the product
martin-audio-iKON-iK81_1200px
  • Martin Audio

Martin Audio – iKON iK81

The iKON iK81 is an advanced 8-channel power amplifier which combines very high power density with superb audio performance, state-of-the-art DSP and network control. A dedicated controller amplifier for the Martin Audio Wavefront Precision WPM line array, the iK81 can also provide multi-channel amplification across the Martin Audio loudspeaker range. The iK81 can deliver a full 1250 watts per channel into 2, 4 or 8 ohms with all channels driven while remaining highly efficient. Its high efficiency reduces the energy drawn from the mains supply and ensures the power reserves needed to deliver superb sound under arduous live conditions. Ethernet is used for system remote control and monitoring via Martin Audio’s VU-NET software application, while a user friendly front panel interface allows full local control of all features. Dante digital audio network inputs are also provided for digital audio distribution and control. Powerful DSP is fully integrated into the iK81 to provide a multitude of features. It also provides up to 1000 FIR filter taps @ 48kHz on each output channel, which is essential to implement DISPLAY’s wide bandwidth optimisation process in the WPM line array.
    Amplifiers
  • Dante Ch: 8x0
  • 24-bit
See the product
nXp-3.02-front|nXp-3.02-front
  • Ashly Audio

Ashly – nXp3.02d

The nXp3.02d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • 24-bit
  • 48kHz-96kHz
See the product