Cart
← Back to Product Catalog

CloudPower CP354D

Amplifiers

More Details

Similar Products

PSX1204D
  • Bose Professional

PSX1204D

PowerShareX PSX1204D is a four-channel, 1200-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via ControlSpace Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
panasonic-wp-dn700|panasonic-wp-dn700
  • Panasonic Connect

Panasonic – WP-DN700

The WP-DN700 is a digital amplifier with high efficiency and high reliability design.  The 2U size achieves a total output of 2000 W or more in total.  Digital amplifier with high efficiency and high reliability design. 
  • WP-DN 700 is 2 ch power amplifier with maximum output 1000 W × 2 (4 Ω load). 
  • Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
  • Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
  • Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
  • Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
  • Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
  • Corresponds to EIA rack mount. 
  • BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.
    Amplifiers
See the product
EM_Acoustics_-_DQ20|EM_Acoustics_-_DQ20
  • EM Acoustics

EM Acoustics – DQ20

The DQ20 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities. The DQ20 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities. The DQ Series of advanced system amplifiers offer a unique combination of high power and audio performance, seamlessly combined with advanced DSP and network control. The DQ Series offers three models, physically identical four-in-four-out amplifiers but with varying total output power configurations of 6,000 watts (DQ6), 10,000 watts (DQ10) and 20,000 watts (DQ20) to suit specific loudspeaker models and audio applications. The DQ Series models offer extremely high power density in a convenient and flexible format for both mobile applications and installations alike. DQ Series advanced system amplifiers represent the most convenient solution for powering EM Acoustics loudspeakers. Each amplifier comes loaded with preset files for all EM Acoustics loudspeaker products, as well as a dedicated “linear” preset with no processor settings applied – but also blank memory slots for users to create their own setting files. Aside from the non-adjustable factory settings for each EM Acoustics product (such as high/low pass filters and limiters), users have access to a variety of processing functions including gain, delay and EQ (parametric and shelf) for system or venue optimisation. Power delivery is an area where the DQ Series amplifiers are unmatched. A state-of-the-art switchmode power supply with power factor correction ensures that a DQ Series amplifier can deliver all that is required, even under demanding load conditions and across a wide range of mains supply voltages. Each channel of a DQ Series amplifier can be configured to deliver its maximum power into either 2 or 4 Ohm nominal loads via the Podware software platform, therefore offering designers and integrators unparalleled flexibility and effectiveness. The use of state-of-the-art components and a finely optimised design results in generous power reserves, thus ensuring that pristine sound quality is maintained even under the most extreme conditions, anywhere in the world. DQ Series amplifiers have both analog inputs (4) and AES3 digital inputs (2) as standard, and can be supplied with an optional Dante™ networked audio input card if required (model numbers DQ6D, DQ10D and DQ20D). Maximum flexibility was the thought process with regards the input infrastructure – the four-in-four-out configuration allows the DQ Series models to be highly flexible whether deployed powering front of house systems, monitor mixes, or fill loudspeakers. The front panel provides an intuitive set of controls and indicators to enable simple and straightforward operation of all functions without the need for the remote software. A set of five LED indicators show signal level from -12dB to +12dB as well as clip, for each of the four DSP inputs. Six illuminated push buttons and two velocity-sensitive rotary encoders provide the user interface for all the input and output functions, as well as the utility features, in conjunction with the clear back-lit graphical display. A further set of LED indicators show output level and limiter status, and individual backlit channel mute buttons are also provided. A final set of four LED indicators give further status information for the amplifier including AES3 or Dante network audio input (if selected), device control network online status, and also the presence of a system EQ overlay if activated via the Podware remote control software platform.
    Amplifiers
See the product