Dante-enabled Product Catalog

- Accepts Balanced Analog Input and Dante® Input.

- Power saving design by the digital amplifier and switching power supply.

- 26-dot LED meter indicates either of VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD.

- The display brightness can be adjusted in four levels.

- Outputs either or both of any 2-channel digital signals extracted from Dante® network signals.

- Supported sampling frequencies: 44.1/48/88.2/96 kHz.

- Physical dimensions are identical to the conventional RM-3 for easy replacement.

With maximum flexibility in mind, KLANG has created the KLANG:konductor, its most powerful and versatile immersive in-ear mixing processor to date, delivering connectivity that is ready for today and tomorrow. Designed with monitor engineers and fixed installations in mind, the high end mixing system delivers 16 immersive mixes and processes 128 input signals at up to 96kHz at an astonishing internal latency of less than 0.25ms.

KLANG:konductor is equipped with three DMI slots, which provide unrivaled IO freedom and guarantee flawless integration into any existing setups. Paired with the included single channel routing capabilities, it also allows the user to freely route between the immersive mix engine and convert between different DMI formats, e.g. Optocore, Dante or MADI, with each DMI card offering up to 64 input and output channels at both 48kHz and 96kHz.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA32/LP² delivers 32×50W @4 Ω in only 1U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA24/LP² delivers 24×50W @4 Ω in only 1U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA16/LP² delivers 16×50W @4 Ω in only 1U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA32/D² delivers 32x 280W @4 Ω in only 2U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA24/D² delivers 24×280W @4 Ω in only 2U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA16/D² delivers 16x 280W @4 Ω in only 2U of rack space.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA32/HP² delivers 32×280W @4 Ω in only 3U of rack space with a redundant power supply.

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA24/HP² delivers 24×280W @4 Ω in only 3U of rack space with a redundant power supply.

H2-4D , the world’s first dedicated 16 channel DOLBY ATMOS ® digital audio renderer

Primary functions:

Convert up to 16 Channels of HDMI audio simultaneously to:
DANTE® (AES67 included)
BALANCED
ANALOG
HDMI® (Audio Only)
AES/EBU (AES3)

Render:
DOLBY Atmos®
DTS X ®

Decode:
DOLBY® - Dolby Digital, Dolby Digital Plus, Dolby TrueHD , Dolby Surround (from Atmos
DTS® - DTS, ES, HD Master Audio, HD High Resolution Audio, Express HD LBR, Neural:X
PCM - 2ch, PCM Multi channel, Downmix

The MAGIC THipPro Intercom System is a DSP-based gateway, available in two versions: MAGIC THipPro 8 VoIP Intercom with 8 lines and MAGIC THipPro 16 VoIP Intercom with 16 lines.

The 1 RU system provides two analogue and eight digital Audio inputs and outputs plus two handset/headset interfaces in addition to the redundant 32 channel Dante interface.

One license for one workplace is already included in the delivery, up to 20 workplaces can be added via software upgrades.
The software allows the user to answer and dial calls and to see the receive and transmit Audio levels. A common SQL data base is available for all systems, all systems can use the same database. The application can control a maximum of ten devices at once.

Features

• Intercom Gateway with 8 or 16 VoIP lines
• Up to 10 systems with 160 voice channels

MAGIC ACX Dante WAN Bridge is a Multi-channel PCM audio transmission system connecting Dante networks over wide area networks (WAN).
Up to 32 Dante channels can be transmitted via PCM16 or PCM24 for to for uncompromised signal quality.

The system takes care of the limited maximum latency of Dante in wide area networks and eliminates high jitter as well as possible clock differences between sender and receiver.
This guarantees reliable transmissions even for global connections.
Redundant GbE Interfaces and AES67 compatibility are available in the system.

Features

• Automatic Sampling Rate Adaptation
• Jitter buffer up to 500 ms
• Intelligent sample rate adaption
• Audio signal detection
• AES67 compatible
• 48 kHz Sampling frequency
• redundant power supply (optional)
• Comfortable Windows management software
• VLAN/QoS-support, SNMP v1, v2c

"Extend your networked AV system to BYOD devices, with the Gio Bluetooth® in-wall module. Leveraging the extended range and exceptional quality of Bluetooth 5.0 Class 2 technology, Gio Bluetooth connects personal peripherals such as smartphones, iPads and laptops to an in-room AV system with IT management functionality. Gio Bluetooth installs into a single-gang with just one CatX cable for both power and data, and offers installer-configurable device naming, PIN security and advanced pairing options.
Optimized for conferencing, Gio Bluetooth enables room users to pair their cellphone with the installed AV system offering two-way audio that can benefit from HearClear™ AEC, voice-lift, and noise reduction technologies¹. With configurable functionality including priority pair and auto-disconnection to prevent accidental pairing in busy office facilities, Gio Bluetooth is ideal for the enterprise. Its connectivity state can be controlled remotely through XTouch touchscreens and third-party systems² such as Crestron®, AMX®."

True connection unlocks the power of possibilities. With Gio XLR, proprietary analog audio products can be connected into an installed network for centralised management, routing and control. Leveraging Dante audio-over-IP technology, Gio XLR is a dual-gang in-wall endpoint with a single cable installation for both power and data. It offers a 2×2 input/output combination with mic/line switching and software-selected 48V Phantom power, making Gio XLR a versatile bridge between audio and IT.

"Give your people the power to perform, with the flexibility of BYOM and the quality of an installed room system. Gio USB is a surface-mount USB-to-Dante endpoint, designed to bridge the gap between IT and AV by allowing connection of laptops and room PCs to a networked AV system. 
Supporting hybrid work and BYOM, Gio USB offers driverless compatibility with leading soft-codec platforms, including two-way volume and mute sync for Microsoft Teams, allowing control of room audio over HID. Easy to install with a single CatX cable and PoE to IEEE 802.3af, Gio USB mounts discreetly for flexible positioning near the room PC or conference table."

Meet the 888 – the portable mixer-recorder that’s compact and light enough to use in a bag, yet has the high channel count and power required for mobile cart productions. The 888 is the smallest portable mixer-recorder on the market that offers Dante for sending and receiving audio over Ethernet. With 8 ultra low-noise, 8-Series microphone preamplifiers, 16 channels, 20 tracks, multiple powering methods, and support for multiple USB control surfaces, the 888 can be easily tailored to your workflow. An updated processing architecture and multiple FPGAs enables the 888 to be fully routable: any physical input may be sent to any track, bus, or output.

Many features have carried over from the premium Sound Devices’ Scorpio, such as the new 8-Series preamplifier design, 2 SD card slots, internal 256GB SSD, and dual L-Mount battery charging and powering. Alternatively, power your 888 using a smart battery, NP-1 battery, or an in-line power supply via its TA4 DC input. The ultra-accurate, fully-featured timecode generator contains its own battery to hold timecode for up to four hours after power off.

Dedicated coms and slate allows for professional bi-directional communication with other crew members. Send customized mixes to the camera or crew with multiple mix buses. With the ability to record to three media simultaneously, you can turn over an SD card to production, AAC files for transcription, and keep a backup on the internal 256 GB SSD.

A built-in three band EQ may be set to either pre- or post-fade for each channel to tackle any problems directly on-set. Enable Dugan Automixing or MixAssist to automatically attenuate unused microphones in multi-microphone applications. Up to 16 channels can be automixed at a time. If you are recording in a noisy environment, enable the optional NoiseAssist or CEDAR sdnx plugins to suppress common background noises instantly on-location.

Get the perfect fit on your cart with the Sound Devices CL-16 or one of several other supported USB control surfaces for remote fader and transport control. Download the companion Android and iPad app, SD-Remote, to access to transport controls, metering, and sound reports on a large touch screen. The SL-2 Dual SuperSlot Wireless Module easily mounts to the top panel, providing up to four channels of wireless audio in each slot.

4 Balanced In, Analog Audio to Dante & 4 Balanced Out, Dante to Analog Audio

• Adjustable phantom power from +0V to +48V.
• Easily route audio with 3rd party units in the Dante network.
• May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)

UHD+ 4x2 HDMI Matrix with Dante and Dolby Digital & DTS Stereo Audio Decoder

• Enabled HDMI de-embedded/embedded designed to bridge 2-channel PCM HDMI audio to/from a Dante® audio network. 
• Balance Audio out can be switch between HDMI De-embedded audio or Dante-In source 
• Dante® audio networking utilizes standard IP networks to transmit high-quality, uncompressed audio with near-zero latencay 
• Supports PCM 2Ch, Dolby Digital, Dolby Digital Plus, DTS, DTS-HD, DTS-HD MA formats/Decode (Downmix to 2 Ch) 
• Non-compress audio performance 
• Sample-accurate time alignment between networked devices 
• Real-time latency statistics, Clock status statistics and signal presence exposed to network

4 Balanced In, Analog Audio to Dante & 4 Balanced Out, Dante to Analog Audio

• Adjustable phantom power from +0V to +48V.
• Easily route audio with 3rd party units in the Dante network.
• May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)

Patton’s FPX6000 enables 8 audio channels and 1 HDCP encryption support video channel to be easily inserted onto an existing Ethernet network backbone without suffering the performance issues and management difficulties associated with audio and video over IP.

Dante’s sub-microsecond synchronization of audio and video eliminates alignment problems—this is accomplished by having a single network clock for the entire system in sync regardless of the number of endpoints, transporting audio and video with low deterministic latency.

In addition to providing high performance audio and video over IP, the FPX6000 is loaded with peripheral connectivity options including USB2.0 and USB OTG for keyboard and mouse, infrared for remotes, even serial signals for PTZ control and more… all over IP!

MA-1000TD is a multi-function network DSP digital High-Z and low-Z power amplifier 2*500W@4Ω, 2*300W@8Ω, bridged 1000W@8Ω, low-Z 100V-1000W@10Ω. It can remotely monitor the status of power amplifier, set compression Controller, limiter, noise gate, parametric equalization, matrix routing, delay and other DSP functions in real time. Simple software interface provides customers with simple setup and operation experience, and a variety of connection methods ensure its good configurability and expandability, suitable for various applications, such as performance center, theatre, gallery, hotel, conference center, shopping center, retail store, restaurant, etc.

Dante PoE Speaker can realize its multifunction of the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

DP 180POE DSP Speaker can realize its multifunction the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. DP 180POE DSP adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality realizes on
this compact speaker of low power design. The system built with plastic body and 6pcs 3 inch high efficient Neodymium driver. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. DP 180POE DSP integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control.

Dante PoE Speaker can realize its multifunction of the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

> CAT5/6 connector to link with Dante network and controlled by Audinate;
> Small size integrated mounting bracket which can be installed in very limited space;
> Adopt advanced V5.0 Bluetooth technology;
> Simple to pair Bluetooth by pressing a button;
> Compatible with a variety of mobile phones, tablets, computers and other devices;
> With RCA and 3.5mm TRS stereo input, TRS priority;
> With one 3.5mm TRS stereo output;
> Support PoE power supply;
> Integrated power supply and audio transmission in one body;
> With Bluetooth call bridge function for conference purposes.
> Convert 1 Bluetooth Audio signal to 2 Dante network audio channel;
> Convert 1 aux or 3.5 jack stereo to 2 Dante network audio channel.
> Receiving Dante network audio signal via local 3.5 jack.

MA-120TD, MA-240TD, MA-350TD, MA-500TD

> Priority:EMC >MIC1>MIC2, MIC3, AUX1, AUX2.
> 4 microphone and 2 auxiliary inputs.
> 1 Dante Audio and 1 DSP control inputs.
> 100V and 4-16 Ohms rear panel switchable speaker outputs.
> Automatic mute function for paging and announcements.
> Individual input gain controls with master volume control.
> Mp3/TUNER/Bluetooth module with screen display.
> 24VDC backup power supply.
> Standard 1U 19 inch size with detachable mounting ears.
> Speaker output short circuit protection.