Cart
← Back to Product Catalog

BARE – DR-1

I/O Interfaces

More details

Similar Products

micromedia-amp-dc
  • Micromedia

Micromedia – Digimedia AMP DC

Digimedia AMP DC is a professional 2 channel Dante interface with analog amplifier output. There is Dante Domain Manager and AES67 support build in. Audio output power can be up to 2x20W. Interface needs 12V or external PoE (Power over Ethernet) splitter. Digimedia AMP DC has professional industrial Phoenix Contact connector for the loudspeakers. Digimedia AMP DC is a professional 2 channel Dante interface with analog amplifier output. There is Dante Domain Manager and AES67 support build in. Audio output power can be up to 2x20W. Interface needs 12V or external PoE (Power over Ethernet) splitter. Digimedia AMP DC has professional industrial Phoenix Contact connector for the loudspeakers.
    I/O Interfaces
See the product
avn-aesio8-iso-square
  • Sonifex

Sonifex – AVN-AESIO8 8 AES3 Input, 8 AES3 Output Dante® Interface, PoE

The AVN-AESIO8 audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate.

This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock.

    I/O Interfaces
See the product
audiopressbox-drive200_1200px
  • AudioPressBox

AudioPressBox – APB-D200 R-D

APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths. APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths. It can provide a hardware master clock for a Dante network. As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure APB-Dante devices connected to the Dante network. Device names, channel labels, signal routing and other parameters (for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller. APB-Dante products use Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.
    I/O Interfaces
See the product