Dante-enabled Product Catalog

The unito NIO 1212 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1212 offers 12 AES and 12 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies. The unito NIO 1212 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1212 offers 12 AES and 12 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies. DELEC unito devices are easy to configure via a web browser and configurations may be stored, imported and exported—reducing setup time for large installations. All the unito products include two Ethernet ports to allow redundant network infrastructure or daisy-chain wiring to reduce the cost of installation while their compact design makes them equally space efficient.

The unito NIO 1624 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1624 offers 16 AES and 24 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies. The unito NIO 1624 provides bidirectional format conversion of analog line signals and AES/EBU audio to and from Dante. The NIO 1624 offers 16 AES and 24 analog inputs and outputs and uses RJ45 for high density, easy to use connections. It also includes redundant power supplies. DELEC unito devices are easy to configure via a web browser and configurations may be stored, imported and exported—reducing setup time for large installations. All the unito products include two Ethernet ports to allow redundant network infrastructure or daisy-chain wiring to reduce the cost of installation while their compact design makes them equally space efficient.

The NIO 0204 is a highly flexible and adaptive networked-audio monitoring controller and pre-amp. The NIO 0204 can be connected directly to a Dante equipped system or a computer running the Dante Virtual Sound Card. The NIO 0204 is a highly flexible and adaptive networked-audio monitoring controller and pre-amp. The NIO 0204 can be connected directly to a Dante equipped system or a computer running the Dante Virtual Sound Card. The half 1RU interface provides four 1GB Ethernet ports (3 x RJ45 and 1 x SFP), two AES/EBU inputs and outputs, a high quality 32-bit stereo microphone preamp, stereo line input and output capability, a stereo headphone amplifier, and an integrated audio mixer. Power for the NIO 0204 can be powered by either the internal power supply unit or via POE (Power Over Ethernet). This makes the NIO 0204 an ideal tool for facilities, production, or broadcast providers that employ centralized computing or processing with just the NIO 0204 providing monitoring to loudspeakers or headphones alongside the computer. Microphones for voiceover, continuity, or commentary can be connected to the NIO 0204’s high quality 32-bit mic inputs, with the remaining analog and digital I/O’s connecting to other local sources such as portable or installed media players for local audition or ingest to the central system via the return Dante connection. The simplicity of installation and configuration reduces the installation costs of the NIO 0204 and gives considerably greater flexibility to the use of an operational area or the choice of location where tasks can be easily carried out.

The unDX4I is a 4 input, 2-gang wall plate interface that also includes two outputs. The unDX4I DanteTM Audio Interface is a cost effective multi‐IO wall box. The unDX4I features four balanced mic/line XLR inputs and two balanced line outputs on a Phoenix connector. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX4I is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT‐5 cable. The unDX4I’s size and IO density make it easy to put Dante connectivity wherever it’s needed ‐ near the audio source or sink ‐ thereby eliminating costly and interference prone analog wiring.

The nXe3.02bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

High input capacity and fader count makes this powerful console ideal for larger applications. High input capacity and fader count makes this powerful console ideal for larger applications.

Compact, portable, and even rack mountable, the TF1 offers impressive capability and versatility for smaller systems. Compact, portable, and even rack mountable, the TF1 offers impressive capability and versatility for smaller systems. Yamaha digital consoles have always been designed with input from leading engineers worldwide to ensure that the most efficient, intuitive operation is achieved. The highly regarded Selected Channel and Centralogic™ interfaces attest to the success of that approach. The TF series combines Yamaha know-how with new input from the field and the latest touch-screen technology to deliver an evolved experience in console operation. Smooth setup and operation, practical presets and scenes, refined design, and software applications that integrate seamlessly with the entire system: these elements comprise TouchFlow Operation, a new concept in console interfaces that offers unprecedented comfort and convenience in small consoles, for a wide range of users and applications.

Ample input capacity and hands-on control in a compact console that can handle a wide range of applications. Ample input capacity and hands-on control in a compact console that can handle a wide range of applications. Yamaha digital consoles have always been designed with input from leading engineers worldwide to ensure that the most efficient, intuitive operation is achieved. The highly regarded Selected Channel and Centralogic™ interfaces attest to the success of that approach. The TF series combines Yamaha know-how with new input from the field and the latest touch-screen technology to deliver an evolved experience in console operation. Smooth setup and operation, practical presets and scenes, refined design, and software applications that integrate seamlessly with the entire system: these elements comprise TouchFlow Operation, a new concept in console interfaces that offers unprecedented comfort and convenience in small consoles, for a wide range of users and applications.

The nXe3.04bd is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

The StudioLive 312AI is a triamped, 12-inch enclosure. Its ability to perform consistently across music genres has earned it a reputation for flexibility and reliability. Ideal for front-of-house use, especially when paired with the companion 18sAI subwoofer, it also makes an excellent sidefill or floor monitor. The 312AI can be pole mounted at 90˚ or with a downward 10˚ tilt. The StudioLive 312AI is a triamped, 12-inch enclosure. Its ability to perform consistently across music genres has earned it a reputation for flexibility and reliability. Ideal for front-of-house use, especially when paired with the companion 18sAI subwoofer, it also makes an excellent sidefill or floor monitor. The 312AI can be pole mounted at 90˚ or with a downward 10˚ tilt. The StudioLive 312AI requires the SL-Dante-SPK card for Dante connectivity.

The StudioLive 315AI features a 15-inch woofer, along with the same triamped power amplification as the 312AI. This unit is the best choice if you are not using a subwoofer, though of course adding a StudioLive 18sAI subwoofer will give you even more bottom. Perfect for larger venues and open-air applications, the 315AI provides all the power you’d expect from a 3-way, 15-inch loudspeaker but packed into a 2-way-sized enclosure. The StudioLive 315AI features a 15-inch woofer, along with the same triamped power amplification as the 312AI. This unit is the best choice if you are not using a subwoofer, though of course adding a StudioLive 18sAI subwoofer will give you even more bottom. Perfect for larger venues and open-air applications, the 315AI provides all the power you’d expect from a 3-way, 15-inch loudspeaker but packed into a 2-way-sized enclosure. The StudioLive 315AI requires the SL-Dante-SPK card for Dante connectivity.

The StudioLive 329AI's distinctive dual 8-inch woofers and quad-amped design provides the highest fidelity in the StudioLive AI series lineup. Its compact size also makes it great for highly mobile applications and low ceiling installs. But it’s the 328AI’s ability to provide amazing vocal clarity that makes it shine for contractor installs and as a floor (wedge) monitor. The StudioLive 329AI's distinctive dual 8-inch woofers and quad-amped design provides the highest fidelity in the StudioLive AI series lineup. Its compact size also makes it great for highly mobile applications and low ceiling installs. But it’s the 328AI’s ability to provide amazing vocal clarity that makes it shine for contractor installs and as a floor (wedge) monitor. The StudioLive 328AI requires the SL-Dante-SPK card for Dante connectivity.

Designed for indoor flown installations, the 328i-W and 328i-B feature a smooth enclosure without handles or pole mounts and have additional reinforced M10 points for yoke and cathedral mounts. Internal grille cloth masks the drivers so that they blend seamlessly into their environments. Companion vertical and horizontal yoke mounts are also available. In all other respects the StudioLive 328i-W and 328i-B are identical to the StudioLive 328AI. Because of its distinctive dual 8-inch woofers and quad-amped design, the 328AI provides the highest fidelity in the StudioLive AI series lineup. Its compact size also makes it great for highly mobile applications and low ceiling installs. But it’s the 328AI’s ability to provide amazing vocal clarity that makes it shine for contractor installs and as a floor (wedge) monitor. Because of its distinctive dual 8-inch woofers and quad-amped design, the 328AI provides the highest fidelity in the StudioLive AI series lineup. Its compact size also makes it great for highly mobile applications and low ceiling installs. But it’s the 328AI’s ability to provide amazing vocal clarity that makes it shine for contractor installs and as a floor (wedge) monitor. For these reasons, the 328AI is also available in white and black install versions. Designed for indoor flown installations, the 328i-W and 328i-B feature a smooth enclosure without handles or pole mounts and have additional reinforced M10 points for yoke and cathedral mounts. Internal grille cloth masks the drivers so that they blend seamlessly into their environments. Companion vertical and horizontal yoke mounts are also available. In all other respects the StudioLive 328i-W and 328i-B are identical to the StudioLive 328AI. The StudioLive 328i-B requires the SL-Dante-SPK card for Dante connectivity.

Designed for indoor flown installations, the 328i-W and 328i-B feature a smooth enclosure without handles or pole mounts and have additional reinforced M10 points for yoke and cathedral mounts. Internal grille cloth masks the drivers so that they blend seamlessly into their environments. Companion vertical and horizontal yoke mounts are also available. In all other respects the StudioLive 328i-W and 328i-B are identical to the StudioLive 328AI. Because of its distinctive dual 8-inch woofers and quad-amped design, the 328AI provides the highest fidelity in the StudioLive AI series lineup. Its compact size also makes it great for highly mobile applications and low ceiling installs. But it’s the 328AI’s ability to provide amazing vocal clarity that makes it shine for contractor installs and as a floor (wedge) monitor. Because of its distinctive dual 8-inch woofers and quad-amped design, the 328AI provides the highest fidelity in the StudioLive AI series lineup. Its compact size also makes it great for highly mobile applications and low ceiling installs. But it’s the 328AI’s ability to provide amazing vocal clarity that makes it shine for contractor installs and as a floor (wedge) monitor. For these reasons, the 328AI is also available in white and black install versions. Designed for indoor flown installations, the 328i-W and 328i-B feature a smooth enclosure without handles or pole mounts and have additional reinforced M10 points for yoke and cathedral mounts. Internal grille cloth masks the drivers so that they blend seamlessly into their environments. Companion vertical and horizontal yoke mounts are also available. In all other respects the StudioLive 328i-W and 328i-B are identical to the StudioLive 328AI. The StudioLive 328i-W requires the SL-Dante-SPK card for Dante connectivity.

The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. The FP-NML2 is ideal for adapting standard audio amplifiers to a Dante network. Model FP-NML2VP operates from PoE. The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. Separate remote controls may be used for each output, or a single remote control may be connected to adjust both outputs simultaneously. VCA control uses industry standard 0 to 10 Volts compatible with a range of RDL passive and multi-point rotary-encoder remote controls. The FP-NML2V is ideal for adapting standard audio amplifiers to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS with crosstalk below the noise floor. The FP-NML2V operates from 24 Vdc and is available in a PoE version: FP-NML2VP. If powered by 24 Vdc and PoE, the FP-NML2VP seamlessly switches over to PoE power upon loss of the external 24 V supply.

The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. The FP-NML2 is ideal for adapting standard audio amplifiers to a Dante network. Model FP-NML2VP operates from PoE. The FP-NML2V is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output provides a mic/line switch and VCA for remote level control. Separate remote controls may be used for each output, or a single remote control may be connected to adjust both outputs simultaneously. VCA control uses industry standard 0 to 10 Volts compatible with a range of RDL passive and multi-point rotary-encoder remote controls. The FP-NML2V is ideal for adapting standard audio amplifiers to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS with crosstalk below the noise floor. The FP-NML2V operates from 24 Vdc and is available in a PoE version: FP-NML2VP. If powered by 24 Vdc and PoE, the FP-NML2VP seamlessly switches over to PoE power upon loss of the external 24 V supply.

The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with Format-A twisted-pair end-points. Model RU-BNFP operates from PoE. The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to a balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with RDL Format-A twisted-pair end-point products. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.  The RU-BNF provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-BNF is also available in a PoE version (RU-BNFP). If PoE power and an external 24 Vdc supply are both feeding an RU-BNFP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with Format-A twisted-pair end-points. Model RU-BNFP operates from PoE. The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to a balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with RDL Format-A twisted-pair end-point products. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.  The RU-BNF provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-BNF is also available in a PoE version (RU-BNFP). If PoE power and an external 24 Vdc supply are both feeding an RU-BNFP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

The RU-FN is a high quality Format-A to Dante network interface compatible with RDL Format-A twisted pair audio products. The RU-FN converts three Format-A audio pairs to Dante networked digital audio channels. The unit also converts a balanced or unbalanced line-level AUX input to Dante. Model RU-FNP operates from PoE. The RU-FN is a high quality Format-A to Dante network interface compatible with RDL Format-A twisted pair audio products. The RU-FN converts three Format-A audio pairs to Dante networked digital audio channels. The unit also converts a fourth input, balanced or unbalanced line-level AUX, to Dante. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.  The RU-FN provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-FN is also available in a PoE version (RU-FNP). If PoE power and an external 24 Vdc supply are both feeding an RU-FNP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 

The RU-FN is a high quality Format-A to Dante network interface compatible with RDL Format-A twisted pair audio products. The RU-FN converts three Format-A audio pairs to Dante networked digital audio channels. The unit also converts a balanced or unbalanced line-level AUX input to Dante. Model RU-FNP operates from PoE. The RU-FN is a high quality Format-A to Dante network interface compatible with RDL Format-A twisted pair audio products. The RU-FN converts three Format-A audio pairs to Dante networked digital audio channels. The unit also converts a fourth input, balanced or unbalanced line-level AUX, to Dante. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.  The RU-FN provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-FN is also available in a PoE version (RU-FNP). If PoE power and an external 24 Vdc supply are both feeding an RU-FNP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 

The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio channels to balanced line level. Input gain trimmers and LED audio level indicators are provided. Model RU-LB2P operates from PoE. The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level. The line level inputs accept unbalanced or balanced signals. Line-level outputs are balanced. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels and a gain trimmer with an associated Dual-LED VU meter for each audio input. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. The RU-LB2 is also available in a PoE version (RU-LB2P). If PoE power and an external 24 Vdc supply are both feeding an RU-LB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio channels to balanced line level. Input gain trimmers and LED audio level indicators are provided. Model RU-LB2P operates from PoE. The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level. The line level inputs accept unbalanced or balanced signals. Line-level outputs are balanced. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels and a gain trimmer with an associated Dual-LED VU meter for each audio input. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. The RU-LB2 is also available in a PoE version (RU-LB2P). If PoE power and an external 24 Vdc supply are both feeding an RU-LB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

The RU-LB4 is a high quality line-level bi-directional Dante network interface. The RU-LB4 converts four line-level audio sources to Dante network channels, and four Dante network audio channels to balanced line level. Input gain trimmers and LED audio level indicators are provided. Model RU-LB4P operates from PoE. The RU-LB4 is a high quality line-level bi-directional Dante network interface. The RU-LB4 converts four line-level audio sources to Dante network channels, and four Dante network audio signals to balanced line level. The line level inputs accept unbalanced or balanced signals. Line-level outputs are balanced. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels and a gain trimmer with an associated Dual-LED VU meter for each audio input.  Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. The RU-LB4 is also available in a PoE version (RU-LB4P). If PoE power and an external 24 Vdc supply are both feeding an RU-LB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 

The RU-LB4 is a high quality line-level bi-directional Dante network interface. The RU-LB4 converts four line-level audio sources to Dante network channels, and four Dante network audio channels to balanced line level. Input gain trimmers and LED audio level indicators are provided. Model RU-LB4P operates from PoE. The RU-LB4 is a high quality line-level bi-directional Dante network interface. The RU-LB4 converts four line-level audio sources to Dante network channels, and four Dante network audio signals to balanced line level. The line level inputs accept unbalanced or balanced signals. Line-level outputs are balanced. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels and a gain trimmer with an associated Dual-LED VU meter for each audio input.  Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. The RU-LB4 is also available in a PoE version (RU-LB4P). If PoE power and an external 24 Vdc supply are both feeding an RU-LB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 

The RU-MLB4 is a high quality mic/line-level bi-directional Dante network interface. The RU-MLB4 converts four mic or line-level audio sources to Dante network channels, and four Dante network audio signals to balanced line level. LED audio signal indicators are provided. Model RU-MLB4P operates from PoE. The RU-MLB4 is a high quality mic/line-level bi-directional Dante network interface. The RU-MLB4 converts four mic or line-level audio sources to Dante network channels, and four Dante network audio signals to balanced line level.  Each input is switch-selectable for mic or line level. In the mic position, the balanced input provides P48 phantom to an associated microphone jack. Connection of a dynamic microphone automatically sets the preamplifier gain to 60 dB. Connection of a condenser microphone automatically sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones. The RU-MLB4 is also available in a PoE version (RU-MLB4P). If PoE power and an external 24 Vdc supply are both feeding an RU-MLB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 

The RU-MLB4 is a high quality mic/line-level bi-directional Dante network interface. The RU-MLB4 converts four mic or line-level audio sources to Dante network channels, and four Dante network audio signals to balanced line level. LED audio signal indicators are provided. Model RU-MLB4P operates from PoE. The RU-MLB4 is a high quality mic/line-level bi-directional Dante network interface. The RU-MLB4 converts four mic or line-level audio sources to Dante network channels, and four Dante network audio signals to balanced line level.  Each input is switch-selectable for mic or line level. In the mic position, the balanced input provides P48 phantom to an associated microphone jack. Connection of a dynamic microphone automatically sets the preamplifier gain to 60 dB. Connection of a condenser microphone automatically sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones. The RU-MLB4 is also available in a PoE version (RU-MLB4P). If PoE power and an external 24 Vdc supply are both feeding an RU-MLB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 

The RU-MLB2 is a high quality mic/line-level bi-directional Dante network interface. The RU-MLB2 converts two mic or line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level. LED audio signal indicators are provided. Model RU-MLB2P operates from PoE.

The RU-MLB2 is a high quality mic/line-level bi-directional Dante network interface. The RU-MLB2 converts two mic or line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level.

Each input is switch-selectable for mic or line level. In the mic position, the balanced input provides P48 phantom to an associated microphone jack. Connection of a dynamic microphone automatically sets the preamplifier gain to 60 dB. Connection of a condenser microphone automatically sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones.

The RU-MLB2 is also available in a PoE version (RU-MLB2P). If PoE power and an external 24 Vdc supply are both feeding an RU-MLB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.