WorxAudio – WaveSeries 18S


More details

Similar Products

fohhn-DLI-130_1200px|fohhn-DLI-130_1200px
  • Fohhn

Fohhn – Linea Focus DLI-130 DAN

The active, electronically inclinable DLI-130 DAN line source speaker enables intelligent and target-oriented sound coverage in venues that have the most difficult acoustic conditions. Using intuitive software, both the vertical dispersion characteristics and the inclination angle of the loudspeaker beam can be precisely adjusted – in real time – to perfectly suit to the room’s acoustic situation. The Linea Focus DLI-130 DAN is a high performance line source system, which can be electronically controlled and monitored. The system is equipped with eight state-of-the-art Class D amplifiers and DSP technology specially developed for this area of application, plus eight coated 4” long excursion drivers. This perfect balance of amplifier-, digital signal processor- and loudspeaker technology enables a maximum SPL of 124 dB to be achieved. The DLI-130 DAN comes with a digital input interface for DANTE. The loudspeaker’s vertical beam dispersion characteristics can be intuitively controlled – in real time – using FOHHN AUDIO SOFT: The vertical beam width, ranging from 0° to 90°, and vertical inclination angle, ranging from -40° to +40°, can both be adjusted in precise 0.1° increments. This means that unwanted reflections from floors and ceilings can be avoided. The result: optimum levels of speech intelligibility, a pleasing sound image and excellent sound quality – even in the most challenging acoustic conditions.
    Speakers
  • Dante Ch: 8x0
  • 48kHz
worxaudio-waveseries-15A_600px|worxaudio-waveseries-15A_600px
  • WorxAudio

WorxAudio – WaveSeries 15A

The 15A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 15A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 15A has a one-inch exit compression driver coupled to a 75 X 75 degree wooden waveguide horn reproducing high frequencies, and a fifteen-inch cone transducer in a tuned enclosure for the low frequencies. A high quality passive network operates very efficiently, also providing EQ points for a flat frequency response. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 15A can be purchased in two versions. The portable configuration has large recessed handles and a stand mount, while the installation version has a standard twelve point flyware system. Both are available in white, black or unfinished exterior. The 15A excels in a myriad of diverse applications requiring a compact trapezoid enclosure, and offers extraordinary performance and value.
    Speakers
horizon_406A_112SA_trequarti_1218_LR
  • FBT elettronica

FBT elettronica – HORIZON VHA 406ND

Constructed in 0.47’’ birch plywood with a tough and tour-ready synthetic rubber surround, each VHA406ND comprises four 6.5-inch woofers plus a 1.4’’ large format neodymium compression driver with a 2.5” voice coil. The summit of the entire project is the 800+400W RMS amplification module with a TCP/IP network interface. Based on the OCA ALLIANCE AES70 standard, the new HORIZON family receives 24-bit 48-96Khz digital audio streaming from all devices compatible with the DANTE standard and communicates with the INFINITO System Management Suite remote control software
    Speakers