Cart
← Back to Product Catalog

Stewart Audio – DSP100-1-CV

Amplifiers

More details

Similar Products

FLX80-4-70V
  • Stewart Audio

Stewart Audio – FLX80-4-CV-D

4 Channel DSP-Enabled Amplifier 4 x 80W @ 70/100V Dante™ Network Enabled The FLX-E-80-4-CV-D is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-80-4-CV-D amplifier supports Dante™ audio.
  • Onboard DSP for signal routing and filtering
  • Ethernet configuration, control & reporting
  • Pre-mix level control
  • 4 analog inputs (4 line/mic; 2 w/ phantom power)
  • 4×4 Break in/Break out Dante™ channels
    Amplifiers
See the product
labgruppen-d-120-4l_600px
  • Lab.gruppen AB

Lab.gruppen – D 120:4L

D 120:4L combines 12000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring. D 120:4L combines 12000 W of flexible power with latest Lake DSP, Dante digital audio networking and avanced system integrity monitoring. The D 120:4L is based on the same foundation of robust, high-power amplifier technologies as our renowned PLM Series – an amplifier platform with a proven record of reliability and sonic performance on the world’s most grueling concert tours and in high-profile, large-scale installations. With the D 120:4L, those same core technologies have been updated and refocused to provide the ultimate solution for the most demanding digitally networked installed sound applications – in stadia, arenas, theme parks, performing arts centers, racecourses and other large commercial sound installations. In addition to legendary Lab.gruppen reliability and sonic excellence, the D Series incorporates newly refined outputs stage technologies along with installation-targeted hardware and software features that optimize amplifier system design and configuration. Together, these new technologies allow systems integrators to minimize both initial equipment costs and end users’ long-term energy consumption.
    Amplifiers
See the product
panasonic-wp-dn700|panasonic-wp-dn700
  • Panasonic Connect

Panasonic – WP-DN700

The WP-DN700 is a digital amplifier with high efficiency and high reliability design.  The 2U size achieves a total output of 2000 W or more in total.  Digital amplifier with high efficiency and high reliability design. 
  • WP-DN 700 is 2 ch power amplifier with maximum output 1000 W × 2 (4 Ω load). 
  • Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
  • Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
  • Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
  • Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
  • Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
  • Corresponds to EIA rack mount. 
  • BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.
    Amplifiers
See the product