Dante-enabled Product Catalog

Complex network switch setup that was previously better left to an IT technician can now be easily accomplished by anyone. A simple switch setting is all it takes to optimize SWP1 series network switches for Dante operation, and a dedicated Windows application provides “network visibility” for comprehensive monitoring and control. Yamaha has used its knowledge of both IT and pro audio to provide "SWR2100P series" simple L2 switch that has been optimized for networked audio installations. The switch can take advantage of "Yamaha LAN Monitor" a dedicated Windows application that provides 'network visibility' for comprehensive monitoring and control. The "SWR2100P series” which are simple L2 switches can supply power as well as audio and control signals to a PoE-compliant Dante device such as the paging station microphone “PGM1” through just one Ethernet cable. Since the power supply and the network wiring can be combined, the number of cables being used can be reduced, and the connection distance can be extended, so the degree of freedom of Dante device installation is increased and construction flexibility is further improved. Systems built around the SWR2100P-5G or SWR2100P-10G L2 switches allow comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability. Understanding how multiple switches installed in different locations are connected, plus how network devices are connected to those switches, can be a difficult, time-consuming task. The Yamaha LAN Monitor makes overall network topology clearly visible, giving the user a comprehensive overview of how multiple switches and Dante network devices are interconnected. Simply connect a Windows PC to the nearest SWR2100P series switch and launch the Yamaha LAN Monitor software. You can take a “snapshot” of the network status when set up as required. The software can then automatically keep track of the settings and alert you to any changes. You could take a snapshot of the network, and then you would be alerted if a cable is disconnected, if a device is turned off, or if a wrong connection is made prior to the performance, for example. Identifying devices connected to a switch by only their IP or MAC address is a difficult and error-prone approach. Connected Dante devices are identified by a Dante icon as well as a device ID previously set up via the Dante Controller software. You can also enter additional info, such as the location of the device, in the Label and Comment fields. If the monitoring device does not respond to a Ping, it judges that a fault has occurred and automatically stops the PoE power supply to that device and then resumes it. This restarts the monitoring equipment and attempts recovery. By collectively managing the status of the devices distributed over a wide area, it can ensure that equipment management can operate far more smoothly.

Complex network switch setup that was previously better left to an IT technician can now be easily accomplished by anyone. A simple switch setting is all it takes to optimize SWP1 series network switches for Dante operation, and a dedicated Windows application provides “network visibility” for comprehensive monitoring and control. Yamaha has used its knowledge of both IT and pro audio to provide "SWR2100P series" simple L2 switch that has been optimized for networked audio installations. The switch can take advantage of "Yamaha LAN Monitor" a dedicated Windows application that provides 'network visibility' for comprehensive monitoring and control. The "SWR2100P series” which are simple L2 switches can supply power as well as audio and control signals to a PoE-compliant Dante device such as the paging station microphone “PGM1” through just one Ethernet cable. Since the power supply and the network wiring can be combined, the number of cables being used can be reduced, and the connection distance can be extended, so the degree of freedom of Dante device installation is increased and construction flexibility is further improved. Systems built around the SWR2100P-5G or SWR2100P-10G L2 switches allow comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability. Understanding how multiple switches installed in different locations are connected, plus how network devices are connected to those switches, can be a difficult, time-consuming task. The Yamaha LAN Monitor makes overall network topology clearly visible, giving the user a comprehensive overview of how multiple switches and Dante network devices are interconnected. Simply connect a Windows PC to the nearest SWR2100P series switch and launch the Yamaha LAN Monitor software. You can take a “snapshot” of the network status when set up as required. The software can then automatically keep track of the settings and alert you to any changes. You could take a snapshot of the network, and then you would be alerted if a cable is disconnected, if a device is turned off, or if a wrong connection is made prior to the performance, for example. Identifying devices connected to a switch by only their IP or MAC address is a difficult and error-prone approach. Connected Dante devices are identified by a Dante icon as well as a device ID previously set up via the Dante Controller software. You can also enter additional info, such as the location of the device, in the Label and Comment fields. If the monitoring device does not respond to a Ping, it judges that a fault has occurred and automatically stops the PoE power supply to that device and then resumes it. This restarts the monitoring equipment and attempts recovery. By collectively managing the status of the devices distributed over a wide area, it can ensure that equipment management can operate far more smoothly.

The Yamaha MCP1 is an advanced wall-mount control panel for controlling MTX and MRX systems. The Yamaha MCP1 is an advanced wall-mount control panel for controlling MTX and MRX systems. Its dot-matrix display and universal character support facilitates dynamic labelling in many languages including Japanese, Chinese and Arabic. Up to 36 parameters can be assigned to either the main Home page or any of the six sub pages. Any of these pages can be secured from unauthorized access by using a programmable PIN code. Up to 16 units of MCP1 can be added to an MTX/MRX system.

• Multi-language displays supported
• Four user levels for access management
• Up to 16 units can be connected per system
• PoE powered
• Back can adapter supplied

The PGX1 is a paging station extension that can be used with the PGM1. The PGX1 is a paging station extension that can be used with the PGM1.

• Function expansion for the PGM1
• 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
• Up to 2 units can be connected to each PGM1
• Dimensions: 132(W) × 56(H) × 154(D) mm
• Weight: 0.9 kg (excluding connecting bracket)

The AoDoM 2 channel provides one RJ45 Dante input and two Neutrik NC3MXX-BAG series black XLR analog outputs. Using our rugged aluminum extrusion channels and hand soldered, 3 ft. analog audio tails, ProCo AoDoM modules provide simple connection of analog equipment to a Dante network and provide studio-quality, low-latency audio via the XLR connectors. Comaptible with any Dante ecosystem and provides line level analog audio signal to output devices. 

• Dante audio input
• Two channels of analog output
• Rugged aluminum extrusion housing
• resilient cable strain relief
• Neutrik black XLR connectors
• 3 ft. ProCo MIC3 balanced cable with braises shielf
• RJ45 metal connector with integrated LED's
• 1 year limited warranty

The AtlasIED DPA1202 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. The network based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation. The AtlasIED DPA1202 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. The network based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.The unit is factory preconfigured in a two-channel 70V mode. If the design requires four channels of low impedance amplification, the amplifier can be configured as 4-channel model with either 4Ω or 8Ω load impedances. Many system designs require both low and high impedance amplification. This unit can be configured to deliver 70V/100V for a paging/background system on a single channel plus two additional 4Ω/8Ω amplifier channels for foreground stereo applications.The DPA1202 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 4-channel Dante™ receiver card or a DPA-AMIX (2) mic / line, (2) AUX input card, giving the DPA1202 a total of 8 inputs. All inputs can be mixed and routed to any of the four amplifier channels. All four amplifier channels have an assortment of DSP tools including level controls, EQ’s, limiters, high & low pass filters, and delay to provide flexibility for a range of applications.The output level can be assigned to either the front panel potentiometers or to the on board GUI. Wired remote level control can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet or mobile device using a web browser. All settings can be password protected.The unit also includes a PC based site manager software that automatically searches within a specific network for all DPA amplifiers on the network. It will list them and allow a single click access to any unit. The DPA Site Manager software can do a variety of functions besides locating IP addresses such as; fault reporting, input & output status, standby status and remote activation via a scheduler timer.The flexibility of the DPA Series amplifiers and comprehensive assortment of local or network control configurations make them an ideal choice in today’s sophisticated commercial audio market.

IPE-DTE-1 Dante Option Card adds Dante audio to VLX and DTX Series. IPE-DTE-1 Dante Option Card adds Dante audio to VLX and DTX Series.

The company’s Class D-based amplification products are engineered to meet the demands of portable and fixed installation audio systems. The company’s Class D-based amplification products are engineered to meet the demands of portable and fixed installation audio systems. Crest Audio, part of the Peavey Electronics family of brands, says the ProTour line of amplifiers includes a choice of four models. Some of the options built into ProTour line of amps include a powerful DSP engine with sampling rates as high as 24-bit/96kHz and high-performance 24-bit analog-to-digital (A/D) and digital-to-analog (D/A) converters. Crest Audio explains that through the amplifiers’ internal DSP options, professional integrators have the ability to configure and optimize audio systems. DSP-based configuration options the amps offer include IR HP/LP crossover filters, RMS compressor, parametric equalization (EQ), alignment delays, and white and pink noise generators. At the heart of the ProTour line of amplifiers is a switch-mode power supply and Class D circuit that incorporates full-bandwidth PWM modulators that facilitate the amps’ operation with built-in circuit protection. The amps’ clip/limiter function provides output monitoring to prevent speaker damage with “gentle” gain reduction at clipping thresholds, as well as heat dissipation and overheat protection. Other options built into the amplifiers include user defined parameters, source input selection and loadable presets via the amps’ front-panel LCD screens, and Dante digital audio modules that enable primary and redundant network connectivity with the ability to monitor the products. The Crest Audio line of ProTour Amplifiers offer a choice of these models:

• ProTour 8004d: 4-channel amp with 2,000 watts per channel into 4 ohms or 70/100-volt direct drive
• ProTour 5002d: 2-channel amp with 2,500 watts per channel into 4 ohms
• ProTour 4004d: 4-channel amp with 1,000 watts per channel into 4 ohms
• ProTour 3003d: 3-channel amp with 1,000 watts per channel into 4 ohms

The AoDoMX4 provides one RJ45 Dante input and four Neutrik black XLR analog outputs. The AoDoMX4 provides one RJ45 Dante input and four Neutrik black XLR analog outputs.

The AoDiMX4 provides one RJ45 Dante output and four Neutrik black XLR analog inputs. The AoDiMX4 provides one RJ45 Dante output and four Neutrik black XLR analog inputs.

Just 531mm wide and 21Kg in weight, NEXO’s extraordinary GEO M10 combines a number of patented technologies with advanced DSP control and integral, ‘no loose parts’ rigging to create a compact, powerful, wide-bandwidth module that’s quick and easy to deploy in flown arrays or groundstacks. Just 531mm wide and 21Kg in weight, NEXO’s extraordinary GEO M10 combines a number of patented technologies with advanced DSP control and integral, ‘no loose parts’ rigging to create a compact, powerful, wide-bandwidth module that’s quick and easy to deploy in flown arrays or groundstacks. Favouring innovative new thinking over conventional line array wisdom, GEO M10 partners a 1.4″ titanium diaphragm HF driver with a single, Neodymium-magnet 10” driver and delivers an unprecendented ratio of LF response to cabinet size, outperforming many larger, dual-driver designs. And with a maximum SPL of 136dB, GEO M10 is twice as powerful as its sister-system, the GEO M6, making it ideal for speech and music events with larger audiences.

The HTE-RX2 is an HDBaseT receiver. The HTE-RX2 is an HDBaseT receiver.

• 4K60 4:4:4 HDR 18Gbps
• 100m (330ft) with Unshielded Cable
• HDMI® 2.0/HDCP 2.2
• Audio DSP & Dante™/AES67 Options 2 or 8 Channel
• Operate & Power both TX & RX from a PoE Switch
• HDMI® Output(s)
• 10/100 LAN Port(s)
• USB 2.0 Device/Host with Selectable Direction
• IP, RS-232 & IR Control

The HTE-TX2 is an HDBaseT transmitter. The HTE-TX2 is an HDBaseT transmitter.

• 4K60 4:4:4 HDR 18Gbps
• 100m (330ft) with Unshielded Cable
• HDMI® 2.0/HDCP 2.2
• Audio DSP & Dante™/AES67 Options 2 or 8 Channel
• Operate & Power both TX & RX from a PoE Switch
• Auto Switching Two HDMI® & One VGA Inputs
• 10/100 LAN Port(s)
• USB 2.0 Device/Host with Selectable Direction
• IP, RS-232 & IR Control

The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D. The PGM1 is a paging station microphone that can be used with the MTX5-D or MRX7-D.

• Dante network support
• 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
• Up to 4 units can be connected per system
• PoE powered
• Dimensions: 132(W) × 56(H) × 154(D) mm (excluding mic)
• Weight: 1.2 kg (including mic), 1.0 kg (excluding mic)

The HTW-2 is an HDBaseT transmitter wallplate. The HTW-2 is an HDBaseT transmitter wallplate.

• 4K60 4:4:4 HDR 18Gbps
• 100m (330ft) with Unshielded Cable
• HDMI® 2.0/HDCP 2.2
• Audio DSP & Dante™/AES67 Options 2 or 8 Channel
• Operate & Power both TX & RX from a PoE Switch
• Auto Switching Two HDMI® & One VGA Inputs
• 10/100 LAN Port(s)
• USB 2.0 Device/Host with Selectable Direction
• IP, RS-232 & IR Control

The  DARK8MAI is a portable robust PoE powered 8 channel microphone pre-amp with Windows 10 app for remote control of gain. The DARK8MAI (Microphone Analogue Input) is a very powerful Dante network audio interface, in a robust stage box/ throw down style. It has a 8 off low noise mic/line inputs which are remotely controlled by a Windows 10 app. The outputs of the microphone amplifiers are transmitted on a fully redundant Dante network interface. Having 8 off low noise high quality microphone inputs makes the DARK8MAI perfect for transporting audio circuits from a stage or a pitch side position to a mixer or other location within a Dante network . The rugged design, PoE powering & remote control facility of the unit means that it can easily be placed and left unattended wherever audio sources are required.

Renkus-Heinz SA Series amplifiers are designed to provide the cleanest possible sound quality and performance, even with the most complex audio signals Renkus-Heinz SA Series amplifiers are designed to provide the cleanest possible sound quality and performance, even with the most complex audio signals. Making their debut with the new C and T Series point source loudspeakers, Renkus-Heinz SA Series amplifiers will ultimately enable all Renkus-Heinz loudspeaker models to be freely combined, offering full networking capabilities, RHAON II control and monitoring, and connection via a choice of Analog, AES/EBU, or Dante single or redundant network input.  Renkus-Heinz SA Series amplifiers will be available in three models:

• the SA-625 amplifier outputs 500W + 125W
• the SA-1250 outputs 1,000W + 250W
• the SA2000 delivers a total of 2000W

With power to spare, SA 625 Series amplifiers deliver more than enough Wattage to easily drive additional CX loudspeakers, SA 1250 and 2000 models are equipped with line voltage looping.  All SA Series amplifiers are equipped with native DSP, including delay, equalization, multi-channel limiting, and noise reduction, with nine available preset memories. Available connectivity configurations include Analog input, as well as RHAON II control and monitoring Dante with either Single or Redundant network Further, networking connectivity in copper and optical formats. 

The VIO 4K is engineered to be road-hardened to survive demanding live event environments. It provides worry-free operation with maximum uptime and low maintenance.  The VIO 4K is engineered to be road-hardened to survive demanding live event environments. It provides worry-free operation with maximum uptime and low maintenance. VIO 4K features an exclusive high-quality processing engine to ensure crisp and natural images, whatever the source and the scaling level are while maintaining ultra-low latency processing as low as 1 frame. The product includes three slots for optional I/0 interfaces to provide optimum versatility and double or triple the output capability of the VIO 4K.  It is designed to process a single source currently to all three outputs. VIO 4K is also available with a Dante audio interface supporting up to 8 bi-directional Dante audio channels.

The TesiraFORTÉ VT is a digital audio server with 12 analog inputs and 8 analog outputs, and includes Acoustic Echo Cancellation (AEC) technology on all 12 inputs.  The TesiraFORTÉ VT is a digital audio server with 12 analog inputs and 8 analog outputs, and includes Acoustic Echo Cancellation (AEC) technology on all 12 inputs. It includes up to 8 channels of configurable USB audio, a 2-channel VoIP interface, and a standard FXO telephone interface. TesiraFORTÉ DAN VT adds Dante digital audio networking.

• 32 x 32 channels of Dante (DAN model only)
• 12 mic/line level inputs with AEC, 8 mic/line level outputs
• Gigabit Ethernet port
• RS-232 serial port
• 4-pin GPIO
• 2-line OLED display with capacitive-touch navigation
• Rack mountable (1RU)
• System configuration and control via Ethernet
• Internal universal power supply
• SIP VoIP interface via RJ-45 connector
• Standard FXO telephone interface via RJ-11 connector
• Signal processing via intuitive software allows configuration and control for signal routing, mixing, equalization, filtering, and delay
• CE marked, UL listed, and RoHS compliant
• Covered by Biamp Systems’ five-year warranty

The TesiraFORTÉ DAN VT4 is a digital audio server with 4 analog inputs and 4 analog outputs, and includes Acoustic Echo Cancellation (AEC) technology on all 4 inputs. The TesiraFORTÉ DAN VT4 is a digital audio server with 4 analog inputs and 4 analog outputs, and includes Acoustic Echo Cancellation (AEC) technology on all 4 inputs. Each model also includes up to 8 channels of configurable USB audio, a 2-channel VoIP interface, and a standard FXO telephone interface. TesiraFORTÉ DAN VT4 includes Dante digital audio networking. 

• 32 x 32 channels of Dante (DAN model only)
• 12 mic/line level inputs with AEC, 8 mic/line level outputs
• Gigabit Ethernet port › RS-232 serial port
• 4-pin GPIO
• 2-line OLED display with capacitive-touch navigation
• Rack mountable (1RU)
• System configuration and control via Ethernet
• Internal universal power supply
• SIP VoIP interface via RJ-45 connector
• Standard FXO telephone interface via RJ-11 connector
• Signal processing via intuitive software allows configuration and control for signal routing, mixing, equalization, filtering, and delay
• CE marked, UL listed, and RoHS compliant
• Covered by Biamp Systems’ five-year warranty

The VITA PLUS is a very powerful Dante network audio interface, in a traditional desktop style. It has a mic/line input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel. The VITA PLUS is a very powerful Dante network audio interface, in a traditional desktop style. It has a mic/line input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel. The high quality microphone input, with the Glensound Referee compressor, makes the Vita Plus suitable for on air commentary use, perfect for a small OB or in an off-tube booth . The flexibility of the talk button configurations, means that the Vita Plus can also be used as a talkback unit as part of a Dante network. The Vita Plus can connect to any Dante network, or to other audio equipment via Glensound’s own Dante interface units. Features

• Complete commentary functionality and 4W in a desktop format
• Dante AoIP network  
• Input is switchable from line, mic, or mic + 48v phantom power
• Low noise, high headroom mic amplifier
• 48K 24bit A/D converter
• Headphone output on 6.35mm jack socket
• Two outputs: one for main programme audio, one for talk back circuit, are both on the single RJ45/CAT5 network audio connection
• Independently configurable buttons for both outputs using Config+: latching, momentary or lazy
• Two inputs for headphone monitoring from network audio connection, both with adjustable level
• Headphone inputs have left/both/right switching
• Glensound intelligent headphone amp provides correct output levels into low or high impedance headphones and can also correctly drive mono earpieces with mono jack plugs.
• Powered via PoE, or internal switch mode PSU

Experience versatile audio analysis functions, flexible matrix conversion tools and a pair of powerful speakers packed into 1 RU with the new Marshall AR-DM61-BT Multi-Channel Digital Audio Monitor.  Experience versatile audio analysis functions, flexible matrix conversion tools and a pair of powerful speakers packed into 1 RU with the new Marshall AR-DM61-BT Multi-Channel Digital Audio Monitor. The AR-DM61-BT is a powerful audio/video QC solution designed specifically for TV stations, broadcast trucks, transfer stations and house of worship facilities. Marshall consulted directly with broadcast engineers and systems integrators to develop a practical and flexible solution that packs versatile audio analysis functions, flexible matrix conversion tools and a pair of powerful (~100 dB) speakers into a single rack unit (1 RU). The first audio rack unit with an intuitive 10” wide LCD touchscreen in the industry, the AR-DM61-BT can display up to 64 audio channels from multiple signal types and includes a built-in live video preview confidence monitor. The AR-DM61-BT supports four dedicated 3GSDI inputs with loop-through (one MADI compatible), one HDMI input, eight balanced analog audio inputs, four stereo AES inputs and eight channels RCA output. Cleverly designed sealed speaker enclosures maximize output in a small form factor for use in noisy control room environments where economic use of rack space is crucial. Planned software upgrades and optional hardware extension ports enable the AR-DM61-BT to serve as a "future proof" solution that will evolve with the ever-changing requirements of the broadcast A/V industry. Additional features include support for the latest Dolby™ formats, Dante™ networked audio technology and a built-in web server for storing and retrieving presets.

This product has reached "end of life". The digiMIX24 Digital Mixing Console gives you complete control over your performance space. Light and portable, it’s easy to transport or store away―whether you’re mixing live bands, a high school musical, a worship service, or recording in a project studio―there are many applications where digiMIX24 feels right at home. With its traditional analog feel, the Live Control Surface allows optimum control with real knobs and a live fader when selecting important functions, while offering conveniences of a responsive touchscreen, USB interfacing, and companion Apple iPad® App. Together, its the ideal mixing experience.

The A32 Dante Version has an additional interface with 64 digital inputs and 64 digital outputs, which can be easily integrated into existing DANTE networks. The VERTO series make integration of digital ADAT and MADI into an existing DANTE network really easy. The compact enclosure of 1RU height and a ½-19“ width saves a lot of rack space. Every VERTO device features word clock I/O for external synchronization and is remote controllable via MIDI or MIDI-over-MADI (VERTOMX). No matter if used together with our A16 MKII, A32 or Pulse16, or a converter from another brand – simply connect to the VERTO via ADAT or MADI – and you’re ready to go! Remote Control Via the Dante Network Both the VERTO series and all other converters from Ferrofish can be remotely controlled via the DANTE Network. If all devices are connected via MIDI, the VERTO converts all DANTE audio streams to ADAT or MADI and the control commands sent over DANTE into MIDI remote control messages. The VERTOMX offers an additional feature: Instead of a separate MIDI Port the MIDI messages are extracted from the MIDI-over-MADI port. The Verto series comprises of:

• Verto32
• Verto64
• VertoMX

The Optimod-FM 8700i air processor comes with Dante AoIP with AES67 capability, a low-latency headphone output and Xponential Loudness algorithm. The Optimod-FM 8700i air processor comes with Dante AoIP with AES67 capability, a low-latency headphone output and Xponential Loudness algorithm. The suite of features that are available with the Optimod-FM 8700i include Orban’s MX distortion-canceling peak limiter; digital MPX; subharmonic synthesis and phase skew correction; a controls for stereo enhancement, multipath reduction, HF enhancement, EQ, AGC, multiband compression, stereo encoding, low-IM peak limiting and composite limiting; full function RDS/RBDS with PS scrolling; ratings processor loop-through; and an automated dayparting with an NTP-reference real-time clock. SNMP features allow for monitoring of status and sending of alarm notifications to a network via an Ethernet connection.

LIDSA32 (Immersive Digital Surround Amplifier-32 Channels) belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. SMA-OBIA belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. Each digital-analog conversion will produce a loss of sound, SMA-OBIA link reduces DAC conversion link. So our structure is more rational, more integrated. The sound of the output will be direct, dynamic amplitude larger, transient better. It effectively overcomes defects of the traditional analog amplifier (such as big volume, big distortion, low power efficiency, etc.). Its power utilization rate can be up to 95%. Features:

• High integration,32 channels output
• High power output, attain to cinema level
• Digital input interface
• 32 channels analog output
• Over-current protection, overvoltage protection, over temperature protection
• Adjust acoustic gain, status display, BTL-PBTL mode switch of per channel by network protocol

With the mc²96, the mc² platform is pushed beyond limitations, culminating in a pure, unparalleled audio production tool dedicated to those who can tell the difference. Whether its intended to be used in broadcast, theater or recording – in each of these applications it stands out with a unique set of features. PURE, PRECISE, PEERLESS. With the mc²96, the mc² platform is pushed beyond limitations, culminating in a pure, unparalleled audio production tool dedicated to those who can tell the difference. Whether its intended to be used in broadcast, theater or recording – in each of these applications it stands out with a unique set of features. The mc²96 provides optimized performance within IP video production environments with native SMPTE 2110 support. In addition to standard channel labeling via channel numbers, individual text labels and static pictures or icons, the mc²96 also features LiveView™ video thumbnails for even more intuitive channel identification. Simply touch a fader and the LiveView™ thumbnail changes to full-screen mode, providing a more detailed view of that channel’s video source such as a camera or a replay machine.