Dante-enabled Product Catalog

The DA44AU is a four input / four output Dante® digital audio converter. The DA44AU allows any non-Dante® audio source such as mixing consoles, amplifiers, computers and Blustream Matrix / distribution products to be connected as an audio source within a Dante® network, as well as converting a Dante® signal back to an analogue audio signal. The DA44AU supports both balanced and unbalanced audio as well as microphone line level inputs inc. 48V phantom power. The DA44AU supports AES67 RTP audio transport.

The UHD Multicast distribution platform allows virtually latency free (1 frame) distribution of HDMI video over a 1Gb Managed Network. Compatible with the current IP200 platform, the IP250UHD-RX is an industry leading 4K HDCP 2.2 HDMI video scaling receiver that, using visually lossless compression technology, delivers 10Gb HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture, or greater distances using the in-built Fibre SFP port. The IP250UHD-RX features dual RJ45 network ports for independent or combined HDMI and/or Dante signal distribution. The unit can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple configuration options available, the Multicast solution is ideal for both commercial and residential installations.

The UHD Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K HDMI video over a 1Gb Managed Network. Compatible with the current IP200 platform, the IP250UHD-TX is an industry leading 4K HDCP 2.2 HDMI transmitter that, using visually lossless compression technology, delivers 10Gb HDMI, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture, or greater distances using the in-built fibre SFP port. The IP250UHD-TX features dual RJ45 network ports for independent or combined HDMI and/or Dante signal distribution. The unit can be powered via PoE from the network switch, or locally should the switch not support PoE. With multiple configuration options available, the Multicast solution is ideal for both commercial and residential installations.

The Blustream IP300 series Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K HDMI video over a 1Gb managed network. Featuring full interoperability with the IP350UHD product line where Dante is required, the IP300UHD-TX is an industry leading 4K HDCP 2.2 HDMI transmitter that, using visually lossless compression technology, delivers 18Gbps HDMI, audio, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the in-built fibre SFP network interface. The unit can be powered via PoE from the network switch, or locally should the switch not support PoE. With multiple configuration options available, the flexibility of the Blustream Multicast video over IP solution makes this platform ideal for multiple installation types.

The Blustream IP300 series Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K HDMI video over a 1Gb managed network. Featuring full interoperability with the IP300UHD product line, the IP350UHD-RX is an industry leading Dante enabled 4K HDCP 2.2 HDMI receiver that, using visually lossless compression technology, delivers 18Gbps HDMI, Dante & AES67 audio, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the in-built fibre SFP network interface. The IP350UHD-RX can support both video and Dante audio distribution from a single network. A second RJ45 connection allows for the Dante audio network interface to be segregated from the video over IP network if required. With a full 18Gbps HDMI scaling chipset on-board, the HDMI output can be adjusted to lower resolutions where legacy displays are required in the same system as full 4K. The scaling capabilities of this unit also allow for videowalls to be created where needed. The unit can be powered via PoE from the network switch, or locally should the switch not support PoE. With multiple configuration options available, the flexibility of the Blustream Multicast video over IP solution makes this platform ideal for multiple installation types.

The Blustream IP300 series Multicast distribution platform allows virtually latency free (1 frame) distribution of 4K HDMI video over a 1Gb managed network. Featuring full interoperability with the IP300UHD product line, the IP350UHD-TX is an industry leading Dante enabled 4K HDCP 2.2 HDMI transmitter that, using visually lossless compression technology, delivers 18Gbps HDMI, Dante & AES67 audio, bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard copper network architecture, or greater distances using the in-built fibre SFP network interface. The IP350UHD-TX can support both video and Dante audio distribution from a single network. A second RJ45 connection allows for the Dante audio network interface to be segregated from the video over IP network if required. The unit can be powered via PoE from the network switch, or locally should the switch not support PoE. With multiple configuration options available, the flexibility of the Blustream Multicast video over IP solution makes this platform ideal for multiple installation types.

Our NPA20DA networked power amplifier delivers advanced audio integration within a commercial or residential AV installation. The NPA20DA features a 2 x 10W digital amplifier (1 x 20W mono) audio output and Dante® audio integration. The NPA20DA can be powered via PoE or PoE+ from a compatible network switch, or locally should the switch not support PoE. The unit also includes the ability to lower the amplifier power output subject to PoE capabilities, DSP with a 31 band EQ, audio delay for lip sync correction, and control via front panel, RS-232, TCP/IP, web-GUI or 12V trigger.

Our NPA70DA networked audio zone amplifier delivers advanced audio integration within a commercial or residential AV installation. The NPA70DA features a 2 x 35W digital amplifier (1 x 70W mono) or 70V / 100V hi-level constant voltage output and Dante® audio integration. The NPA70DA can be powered via PoE++ from a compatible network switch, or locally should the switch not support PoE++. The unit also includes the ability to lower the amplifier power output subject to PoE capabilities, support for combined or independent LAN and Dante® connections, DSP with a 31 band EQ, audio delay for lip sync correction, and control via front panel, IR, RS-232, TCP/IP, web-GUI or 12V trigger.

The PRO-IN4HDA board features 4x HDMI 2.0 inputs supporting 4K 60Hz 4:4:4 that can be independently routed to any HDMI/HDBaseT output board. Each HDMI input includes independent 2ch Dante audio breakout, fixed level 2ch analogue audio breakout, and 4x 2ch Dante audio inputs allowing audio embedding onto the HDMI source. The PRO-IN4HDA features quick release card module fittings allowing simple installation into the Custom Pro Matrix hub.

The DA11ABL-WP is a multi-input / output wall plate to convert Bluetooth and analogue audio within a digital Dante® networked audio system. The DA11ABL-WP converts 2 x input channels of Bluetooth, or unbalanced audio to Dante® digital audio, and 2 x channels of Dante® audio to 2 x output channels of unbalanced audio. Software configuration for the DA11ABL-WP allows for the Bluetooth name to be amended as required where being deployed in multi-user spaces. The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for Decora backbox compatibility. The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.

The DA11ABL-WP-US is a multi-input / output wall plate to convert Bluetooth and analog audio within a digital Dante® networked audio system. The DA11ABL-WP converts 2 x input channels of Bluetooth, or unbalanced audio to Dante® digital audio, and 2 x channels of Dante® audio to 2 x output channels of unbalanced audio. Software configuration for the DA11ABL-WP allows for the Bluetooth name to be amended as required where being deployed in multi-user spaces. The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for both UK & EU backbox compatibility. The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.

PRAGMA BTone Dante 2 is a high-quality advanced Bluetooth® Audio Interface for reliable operation in fitness studios, hotels, restaurants, churches, schools, meeting rooms and other locations. API, individual naming, 2x2/4x2 or 4x4 Audio, Bluetooth 5.0, visibility options, simple or PIN-code pairing, black/white/aluminum (US)

Rack-mounted Media Station that supports mixing, recording, streaming, and backing up video from up to 4 Full HD or 2 4K sources simultaneously. Features:

• Up to 2160p30 recording and streaming.
• Up to 2 RTMP/RTMPS streams to any CDN.
• Includes NDI|HX and Dante Audio licences.
• 2 TB internal HDD.
• VCMS integrations (Opencast, Kaltura, Panopto), FTP/SFTP and Google Drive support.
• Built-in web interfaces for real time control of the recording and streaming processes and for video managing.
• Different ways to control: mobile phone, Graphical User Interface (GUI), Online Director web page and app (Windows/Mac), RS-232/TCP, USB numeric keypad, Cloud, and API for a deeper integration.
• Package additionally contains rack mounts and a USB numeric keypad.

Bolin’s D20 Series Dante AV Ultra transceiver device can be programmed as an encoder or a decoder via firmware update. D20 Series is a single channel networked AV over IP transceiver that is fully compatible with Dante audio devices within a Dante ecosystem for HDMI sources up to 4K60Hz 4096 x 2160, with embedded audio and PTZ camera movement control via IP or IR pass-through. It provides audio and video streaming over a standard gigabit network and D20S/D20H models as decoders output baseband video, either HDMI or 12G SDI, to work in professional AV applications. D20S has HDMI 2.0 and 12G-SDI output, which has SDI video processor built-in to provide SDI (Up to 12G-SDI) signal decode for Pro AV and broadcast video workflow applications.

1CH HDMI2.0 4KP60 Encoder/Decoder The SC6F0N1 HDMI 2.0 Pro supports 1 channel of Dante AV-H video encoder or decode with 4Kp60 resolution. Dante AV-H requires only 100Mbps bandwidth and less than 100ms video transmission delay, which is ideal for intelligent education and webcasting. YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

1CH HDMI2.0 4KP60 Encoder/Decoder The SC6F0N1 HDMI 2.0+ supports 1 channel of Dante AV-H video encoder or decode with 4Kp60 resolution. Dante AV-H requires only 100Mbps bandwidth and less than 100ms video transmission delay, which is ideal for intelligent education and webcasting. YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

1CH HDMI 1080P60 Encoder The SC6E0N1 HDMI to IP/UVC v2 allows you to encode one channel of video from an HDMI source to Dante AV-H at 1080p60 resolution. Dante AV-H requires only 100Mbps bandwidth and less than 100ms video transmission delay, which is ideal for intelligent education and webcasting. YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

1CH SDI+HDMI 1080P60 ENCODER+DECODER The SC6E0N1 AIO supports 1 channel of Dante AV-H video encode or decode with 1080p60 resolution. Dante AV-H requires only 100Mbps bandwidth and less than 100ms video transmission delay, which is ideal for intelligent education and webcasting. YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

The Dante AV Ultra to HDMI 2.0 decoder supports 4K60 4:4:4 video and lossless compression technology, with a very low 8ms latency and precise video and audio synchronization, making it ideal for large-scale events such as concerts and sports events. YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

The HDMI 2.0 to Dante AV Ultra encoder supports 4K60 4:4:4 video and lossless compression technology, with a very low 8ms latency and precise video and audio synchronization, making it ideal for large-scale events such as concerts and sports events. YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

The NHD-500-DNT-TX is part of the powerful NetworkHD 500 series family of products. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The 500 series comes loaded with a number of advanced features such as the flexibility of Ethernet or Fiber as a transport method. Ultra-low latency encoding and incredibly fast matrix switching speeds enhance the experience. Unique to this encoder is an integrated 2 channel Dante & AES67 audio output.

The TNET-DEC-H211-DA AVoIP decoder is the perfect complement to our new line of encoders: The H101-DA and the C211-DA. The TNET-DEC-H211-DA features a built-in scaler for full flexibility and a local HDMI input for use with digital signage players or room PCs. Key Features: · Built-in scaler for full flexibility · Local HDMI input for digital signage players or room PCs · 4K60 1G Ethernet with subframe latency · Dual LAN ports with PoE/PoE+ pass-through · VLAN tagging support · USB host port · HDMI loop output · Audio embedding/de-embedding · 2x2 CH Dante Audio break-in/out · LED display for easy installation and troubleshooting · Video Wall up to 16x16 with Mosaic configuration support · USB 2.0 transport and routing/ Mouse Roaming in Video Wall mode · Built-in WEB UI for configuration and setup · Open direct-control API · Compatible with Dante Controller & Dante Domain Manager · Proprietary software for management and mass deployment

The TNET-ENC-C211-DA is an innovative encoder that builds on our H101-DA by adding the convenience of a USB-C port with 100W Power Delivery (PD). The TNET-ENC-C211-DA is equipped with a host of features that make it ideal for streaming high-resolution content over a network. It supports 4K60 1G Ethernet with subframe latency, dual LAN ports with PoE+ pass-through, a USB host port, HDMI loop output, 2x2 CH Dante Audio and audio embedding/de-embedding. The TNET-ENC-C211-DA is also easy to install and troubleshoot. It features a built-in LED display that provides information such as IP address, and it offers a variety of management and control options, including a built-in WEB UI, an open direct-control API, compatibility with Dante Control & DDM, and proprietary software for management and mass deployment. Key Features: · USB-C port with 100W PD · 4K60 1G Ethernet with subframe latency · Dual LAN ports with PoE/PoE+ pass-through · VLAN tagging support · USB host port · HDMI loop output · Audio embedding/de-embedding · 2x2 CH Dante Audio break-in/out · LED display for easy installation and troubleshooting · Video Wall up to 16x16 with Mosaic configuration support · USB 2.0 transport and routing/ Mouse Roaming in Video Wall mode · Built-in WEB UI for configuration and setup · Open direct-control API · Compatible with Dante Controller & Dante Domain Manager · Proprietary software for management and mass deployment

The TNET-ENC-H101-DA is a versatile encoder that offers a suite of advanced features for today’s AV environments. The T-NET-ENC-H101-DA is equipped with 4K60 1G Ethernet with subframe latency, making it ideal for streaming high-resolution content over a network. It also features dual LAN ports with PoE+ pass-through, a USB host port, HDMI loop output, 2x2 CH Dante Audio and audio embedding/de-embedding. To make installation and troubleshooting easy, the T-NET-ENC-H101-DA is equipped with a built-in LED display that provides information such as IP address. It also offers a variety of management and control options, including a built-in WEB UI for configuration and setup, an open direct-control API, compatibility with Dante Controller & Dante Domain Manager, and proprietary software for management and mass deployment. Key Features: · 4K60 1G Ethernet with subframe latency · Dual LAN ports with PoE/PoE+ pass-through · VLAN tagging support · USB host port · HDMI loop output · Audio embedding/de-embedding · 2x2 CH Dante Audio break-in/out · LED display for easy installation and troubleshooting · Video Wall up to 16x16 with Mosaic configuration support · USB 2.0 transport and routing/ Mouse Roaming in Video Wall mode · Built-in WEB UI for configuration and setup · Open direct-control API · Compatible with Dante Controller & Dante Domain Manager · Proprietary software for management and mass deployment

AI-based 4K PTZ Camera The UV430 PTZ Camera supports Dante AV-H to deliver uncompromising video quality at low latencies.

• Delivers up to 4K image at 60fps
• AWB ( Auto White Balance), AE (Auto Exposure), AF (Auto Focus) Image Adjustments
• Available in 12x, 25x, and 31x optical lens options
• AI powered auto-tracking the presenter and zone modes

OIP-N60D Dante AV-H is a low latency 4K video over IP Bridge. The device receives IP streams from sources including encoders, IP cameras and playout servers. OIP-N60D Dante AV-H supports multiple streaming standards including Dante AV-H and Dante audio. Users can select and switch between IP sources using the web UI, and output video via HDMI and USB. • Decodes Dante AV-H & RTSP with HDMI and USB out • Supports bi-directional Dante audio • Delivers low latency 4K video • Long-distance IP-based AV transmission • Supports PoE and USB power for easy installation

Provide an advanced, complete AVoIP streaming solution for streaming top-quality video and audio in 1GE (1Gbps) networks using JPEG2K-like compression. KDS-17 is perfectly suited to varied spaces and scenarios that demand high-quality video presentation at up to 4K60 4:4:4 with minimal latency – including, command and control centers, meeting rooms, digital signage, auditoriums, active learning, and anywhere there are large screens or video walls. · 4K60 4:4:4 Ultra-high video quality · 2x2 channels of Dante/AES67 audio · USB and HDMI video connectivity · Easy-to-use KM/KVM · Control of large-scale video walls up to 256 screens · Ultra-fast switching of less than 1 second