BLOCK 4+

E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the E-Vocal MYRIAD product:

• E-Vocal ARS-1616
• E-Vocal ARS-3232

These models are 1U rack mount analogue converters designed to transfer 16 or 32 analogue audio channels over a Dante network in both directions. Space-saving 25-pin D-sub connectors are provided for use with optional breakout boxes to input and output balanced line-level analogue audio signals. Two etherCON connectors (Dante Primary/Secondary) are available for redundant operation using two separate networks. For high availability operation requirements, dual AC input and dual PoE power sources are available for redundant operation. The units feature indicators for operation status and current sample rate as well as overload LEDs for each input and signal LEDs for each input and output. Any other settings, such as sampling frequency, channel routing or latency, can be made by the free “Dante Controller” computer application. The sampling frequency, power source status, will be displayed on the 2×20 character display located on front bezel. More info: https://www.aristaproav.com/product/myriad/

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR analogue input in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and one AX series XLR analogue input in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.

The ALF-DAI-2XLR 2 channel analog to Dante input adapter is a complete high-performance Dante device with the automation and ease-of-use features that make Dante the world’s most popular audio networking solution. The ALF-DAI-2XLR Adapter is compatible with all Dante interfaces and provides all the features you would expect from a Dante audio network. It is capable of providing high-fidelity audio reproduction, ultra-low latency, and sample-accurate synchronization across the entire network. Features:

• Seamlessly integrate Dante systems into traditional analog systems.
• There is no need to discard familiar mixing consoles, wireless microphones, and other analog signal sources, or analog amplifiers. All you need is to incorporate them into your audio network via Dante I/O.
• With 2 channels of analog input on XLR
• POE(802.3af)