Dante-enabled Product Catalog

The Versarray™ Pro 112 Powered Ribbon Tweeter Line Source Array speaker system consists of a 12″ Neo Black Widow® woofer combined with a Neodymium based Peavey RD™ 2.6 ribbon tweeter in a cabinet with a simple, quick, yet flexible rigging system.  Designed to provide modular coverage of small to medium venues, and intended for use with the companion Versarray™ Pro Sub models, the Versarray™ Pro 112 offers excellent versatility with a very high performance capability. The two-way system consists of the following driver components: a 12″ Black Widow ® Neo series woofer with Neodymium magnet structure. Capable of over 500W of continuous power handling (AES Std 2-1984), the woofer can handle a lot of sheer power. The high frequencies are handled by two Peavey RD™ 2.6 ribbon tweeters utilizing a composite sandwich ribbon, a Neodymium magnet system, and a low distortion waveguide.

Power for bi-amping is supplied by some very efficient power amplifier systems, controlled by a sophisticated and refined DSP operations system with Dante connection capability.  Total system power is 3400W total peak power, with 2000W peak power for the woofer, and 1400W total peak power for the two ribbon tweeters. This sheer power is controlled precisely and processed by a high performance DSP system, which provides all the crossover and EQ functions, as well as providing all limiting, compression and driver protection duties with unfailing attention to every detail of the music.

A unique set of control buttons on the rear panel allow analog signal input and use without the need for a network controller, by setting the system for typical use situations via push-button.  This feature allows the use of the system without the requirement for a full-blown digital networking controller or system.

The adjustable rigging system provides for a classic straight line-array configuration, or a number of different angling options, providing easy aiming of the system. Angles between the array modules is adjustable from 0 degrees (straight), to 7.5 degrees in 2.5 degree increments. Total angle possible between two cabinets is 15 degrees.

Quick-lock pins are supplied with the rigging hardware to couple the Versarray™ Pro 112 modules together and lock the angles between them into place, as well as for the rigging halo and fly bar configurations of a line array. The flexibility of the Versarray system allows the use of anywhere from 1 to 10 Versarray™ Pro 112 modules in conjunction with anything from one Versarray 118 Pro Sub to as many Versarray 218 or 215 Pro Subs as you can! An optional special groundstack bracket set mounts to the Versarray 218 Pro Sub, and allows up to three of the Versarray™ Pro 112’s to be mounted on top of the Versarray 218 Pro Sub, and angled upward, for use on stage in a stadium seating situation. 

The Versarray™ Pro 215 Sub Powered Subwoofer speaker system consists of a pair of 15″ Low Rider® woofers combined with a super-solid cabinet with a simple, quick, yet flexible rigging system.  Designed to provide modular coverage of small to medium venues, and intended for use with the companion Versarray™ Pro 112 models, the Versarray™ Pro 215 Sub offers excellent versatility with a very high performance capability. The subwoofer system consists of the following woofer components: a pair of 15″ Low Rider® series woofers with a very long throw 4″ voice coil structure. Capable of over 800W of continuous power handling (AES Std 2-1984), these woofers can project a lot of low frequency energy. 

 The Versarray™ Pro 215 Sub incorporates Peavey’s UniVent air pumping venting system.  The UniVent venting system literally pumps air through the enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. This helps keep the woofer operating temperatures from getting so high, and increases reliability and reduces power compression under heavy continuous drive conditions. The air pumping action is achieved without excessive turbulence or any significant net asymmetry of total vent air flow.

Power for both woofers is supplied by some very efficient power amplifier systems, controlled by a sophisticated and refined DSP operations system with Dante connection capability.  Total system power is 3000W total peak power, with 1500W total sine wave power for the woofers. This sheer power is controlled precisely and processed by a high performance DSP system, which provides all the crossover and EQ functions, as well as providing all limiting, compression and driver protection duties with unfailing attention to every detail of the music.

The adjustable rigging system provides for hanging multiple Versarray™ Pro 112 cabinets below a single Sub, or multiple Subs.  Quick-lock pins are supplied with the rigging hardware to couple the Versarray™ Pro 215 Subs together, and to the rigging Halo and Frames.  The flexibility of the Versarray™ FlyQWIK™ system allows the use of anywhere from 1 to 5 Versarray™ Pro 215 Subs in conjunction with an appropriate number of Versarray™ Pro 112 cabinets.

An optional special Sub Support Frame rigging adaptor mounts to the Versarray™ 215 Pro Sub, and allows Versarray™ Pro 112’s to be flown below the Sub, with the Sub being flown from a Versarray™ Halo.   See Crest Audio® Model Versarray™ Mk3 Halo Spec Sheet for details of the allowable mix of Versarray™ Subs to 2-ways.

LivePremier™ is a full range of modular and scalable 4K/8K multi-screen presentation systems and videowall processors, delivering uncompromising presentation experiences to high-end staging and premium system integration. LivePremier™ is a full range of modular and scalable 4K/8K multi-screen presentation systems and videowall processors, delivering uncompromising presentation experiences to high-end staging and premium system integration. In its largest chassis configuration, Aquilon offers up to 24 inputs and 20 outputs and up to 24x 4K layers. Aquilon combines industrial grade reliability, real-time 10/12-bit 4:4:4 video processing power and pure 4K60p on each input and output with ultra-low latency. The system is easy to configure and operate via its cutting-edge HTML5-based user interface. With the native Dante audio routing capability, up to 64 channels of audio can be embedded or de-embedded over a Dante network. The LivePremier™ Aquilon series is comprised of seven high-performance pre-configured products:

• RS alpha
• RS1
• RS2
• RS3
• RS4
• C
• C+

The two-way e-351 Nano Speaker redefines small loudspeaker capabilities by producing high output exceptionally high-quality sound form a very compact aluminum die-cast weather and corrosion resistant system. The two-way e-351 Nano Speaker redefines small loudspeaker capabilities by producing high output exceptionally high-quality sound form a very compact aluminum die-cast weather and corrosion resistant system. With reference quality flat response from 130 Hz to well above what the most discerning humans can hear, the e-352 is capable of output levels of systems typically twice the size. The e-351 utilizes applying state-of-the-art materials and technology to achieve audiophile quality at professional sound pressure levels. State-of-the-art 3.5-inch co-axial cone transducer achieves high output by combining a very powerful Neodymium magnetic circuit for efficiency with high-temperature voice coils and physical optimization of the magnet assembly for maximum heat dissipation to the aluminum enclosure. Coaxially mounted through the pole piece of the driver is a unique beryllium 25 mm compression tweeter with Neodymium magnetic assembly for low distortion extend high-frequency response. The passive crossover is precisely mated to the specialized DSP in the VUEDrive V242 Systems Engine to maximize response accuracy while providing maximum power and transducer protection. The die-cast aluminum enclosure provides considerable rigidity for resonance-free operation as compared with other compact systems with plastic enclosures. The aluminum baffle features an integrated high-frequency waveguide and very low diffraction to ensure the full high-frequency clarity of the beryllium dome hf driver is not compromised. The Aluminum enclosure’s ability to withstand corrosion and moisture damage also makes the e-352 well suited for use outdoors and in harsh weather applications. Features

• Redefines the SPL-to-size ratio: Architect approved design with esoteric audiophile quality and professional audio output
• Very low distortion and flat response provides ultra high-end audiophile quality with professional sound pressure output
• State-of-the-art Coax 3.5-inch high output transducer
• 25 mm Truextent® beryllium compression tweeter with exceptionally strong Neodymium magnetic circuit for  high-frequency bandwidth, and clarity
• Extremely small die-cast Aluminum Body — the e-351’s elegant enclosure is made from solid die-cast aluminum for maximum rigidity and corrosion resistance (available in black and white with optional full frontal metal grill)
• Passive system specially designed for use with VUEDrive V242 Systems Engine to provide a new level of sonic accuracy and output
• Flexible mounting with included bracket enables quick and intuitive speaker aiming, with M6 safety anchor.

The IPD-SM82-EZ-II is a Dante-enabled, digital endpoint solution in a surfacemount loudspeaker.  The IPD-SM82-EZ-II is a Dante-enabled, digital endpoint solution in a surfacemount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up. Driver components consists of one 8.0 inch polypropylene woofer and one 1.0 inch soft dome tweeter in a ported enclosure. The included premountable surface-mount bracket allows for quick and easy installation and the powder-coated aluminum grille keep the speaker looking good in most environments. The system is UL 60065 approved. Included accessories: Safety cable, wall mount bracket, conduit connector and optional port plug.

The IPD-SM52-EZ-II is a Dante-enabled, digital end-point solution in a surface-mount loudspeaker.  The IPD-SM52-EZ-II is a Dante-enabled, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up. Driver components consists of one 5.25 inch polypropylene woofer and one 1.0 inch soft dome tweeter in a ported enclosure. The included pre-mountable surface-mount bracket allows for quick and easy installation and the powder-coated aluminum grille keep the speaker looking good in most environments. The system is UL 60065 approved. Included accessories: Safety cable, wall mount bracket, conduit connector and optional port plug.

The es-269 compact ACM subwoofer system redefines small subwoofer capabilities by producing high output exceptionally high-quality sound from a very compact dual driver system.  The es-269 compact ACM subwoofer system redefines small subwoofer capabilities by producing high output exceptionally high-quality sound from a very compact dual driver system. With reference quality flat low-end response from 200 to 45 Hz, the es-269 is capable of output levels of systems typically twice the size. The es-269 apples VUE’s patent-pending ACM -Active Compliance Management- technology from the hm-class subwoofers, to a new compact even “mini” subwoofer breaking the normal size ratio to SPL output standards. ACM technology combines both band-pass and vented alignments into a single enclosure. The s-269 places two high performance, 6×9-inch transducers into this configuration, with both woofers sharing a common vented chamber. One woofer’s frontal radiation is direct, while the second woofer’s frontal radiation drives the band-pass chamber. Using sophisticated DSP the two ACM subsections combine acoustically precisely aligning the phase arrivals of the front facing woofer, the common chamber vent, and output of the bandpass chamber vent. The powerful amplifier sends 200W of pure sine wave power (350W “burst”) with a unique optimized signal to each woofer. The combination of 700 watts of burst power produces over 124 dB peak output in a half space environment (ground stacked). The combination of ACM, precision-engineered transducers, and sophisticated electronics allows the s-269 to deliver much higher output throughout its operating bandwidth from a remarkably small enclosure. Features

• Exceptionally low front profile: Architect-pleasing design with esoteric audiophile quality and professional audio output down to 40 Hz
• ACM (Active Compliance Management): Patent-pending hybrid design combines both band-pass and vented alignments into a single, compact footprint for more output and definition.
• Very low distortion with professional sound pressure output
• Innovative Purpose-designed dual 6×9-inch high output cone transducers
• Premium birch plywood enclosure with extensive internal bracing and a highly-durable Dura Coat finish.
• Specially designed for use with the VUEDrive V242 Systems  Engine to provide a new level of sonic accuracy and output
• Flexible mounting bracket allows fixed installation on the wall or to the ceiling

The two-way e-352 Nano Speaker redefines small loudspeaker capabilities by producing high output exceptionally high-quality sound form a very compact aluminum die-cast weather and corrosion resistant system.  The two-way e-352 Nano Speaker redefines small loudspeaker capabilities by producing high output exceptionally high-quality sound form a very compact aluminum die-cast weather and corrosion resistant system. With reference quality flat response from 130 Hz to well above what the most discerning humans can hear, the e-352 is capable of output levels of systems typically twice the size. The e-352 utilizes applying state-of-the-art materials and technology to achieve audiophile quality at professional sound pressure levels. State-of-the-art dual 3.5-inch cone transducers achieve high output by combining a very powerful Neodymium magnetic circuits for efficiency with high-temperature voice coils and physical optimization of the magnet assembly for maximum heat dissipation to the aluminum enclosure. Mated to these drivers is a unique beryllium 25 mm dome tweeter with powerful Neodymium magnetic assembly for low distortion extend high-frequency response and high efficiency. The passive crossover is precisely mated to the specialized DSP in the VUEDrive V242 Systems Engine to maximize response accuracy while providing maximum power and transducer protection. The die-cast aluminum enclosure provides considerable rigidity for resonance-free operation as compared with other compact systems with plastic enclosures. The aluminum baffle features an integrated high-frequency waveguide and very low diffraction to ensure the full high-frequency clarity of the beryllium dome hf driver is not compromised. The Aluminum enclosure’s ability to withstand corrosion and moisture damage also makes the e-352 well suited for use outdoors and in harsh weather applications. Features

• Redefines the SPL-to-size ratio: Architect-pleasing design with esoteric audiophile quality and professional audio output
• Very low distortion and flat response provides ultra high-end audiophile quality with professional sound pressure output
• Truextent® beryllium dome tweeter with exceptionally strong Neodymium magnetic circuit for  exceptional output, high-frequency bandwidth, and clarity
• Minimum-diffraction front baffle for audiophile high-frequency performance
• State-of-the-art dual 3.5-inch low-frequency high output cone transducers with Neodymium magnetic circuit
• Die-cast Aluminum Body — the e-352’s elegant enclosure is made from solid die-cast aluminum for maximum rigidity and corrosion resistance (available in black and white with optional full frontal metal grill IP-56 configuration)
• Passive system specially designed for use with the VUEDrive V242 Systems Engines dsp amplifier to provide a new level of sonic accuracy and output
•  Flexible mounting with included bracket enables quick and intuitive speaker aiming, with M6 screw to accept safety anchor.

Wisycom's MRK980 is a true diversity, ultra-wideband dual channel receiver.  WWisycom's MRK980 is a true diversity, ultra-wideband dual channel receiver.  With its 1090MHz of band switching, it ensures the users an exceptional band flexibility, combined with a superb selectivity and intermodulation immunity, for best operating performances of the wireless microphone systems. MRK980 also features an internal DSP processor, Wisycom famous Multicompanding system, new Dante compatibility and a completely and renewed user interface, which make this system easy and quick to setup. Features

• Two channels true diversity receiver (full DSP processing)
• Up to 1090 MHz bandwidth in 170/1260 MHz range
• Push to talk (PTT) enabled with dedicated outputs (optional)
• Analogue, AES/EBU & Dante outputs (with redundancy)
• Dante machine Synchronized mode: no sample rate delay!
• Next Gen Multiband front-end filtering:
  • High Q moving filter in 170-230 MHz
  • High Q moving filter in 470-800 MHz
  • High Q moving filter in 960-1160 MHz (DME) (or 806-810 MHz saw filter – Japan)
  • Country specific saw filters: USA 940-960 MHz or Japan 1240-1260 MHz
• Wideband and Narrowband DSP-FM operation (SW selectable):
  • Narrowband allows 50% more band efficiency (200/250 kHz channel density)
  • Narrowband allows about 3dB extra sensitivity and noise immunity
• Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
• High contrast OLED display
• Monitor & control through USB and Wisycom Manager 2.0 (computer SW)
• Expansion slot for GPIO or future additional feature

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

Atlas is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Atlas is ideal for music and sound recording, mixing, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.    Atlas is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Atlas is ideal for music and sound recording, mixing, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.  Atlas offers eight analogue recording channels, eight monitoring outputs, stereo digital input and output on a phono connector plus concurrent optical digital I/O ports that can interface to S/PDIF or ADAT data formats, giving Atlas a maximum capability of 18 concurrent input and output channels plus stereo headphones.   

Titan is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Titan is ideal for music and sound recording, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications.    Titan is a USB multi-track audio interface for personal recording and sound production, for professional musicians, songwriters, engineers and producers as well as recording studios, post production facilities and scoring stages. Titan is ideal for music and sound recording, multitracking, overdubbing, stem-based mastering, analogue summing and critical listening applications. 

The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network.   The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network. With this setup, DANTE users can enjoy the excellent sound quality of both the Titan and Atlas A/D and D/A converters, and their equally well regarded on-board microphone preamplifiers. Titan was recently rated 'the pinnacle of USB recording' with 'fantastic converters and mic pre's' by John Gatski, of Everything Audio Network.  Control of the Prism Sound Titan or Atlas units when connected to DANTE is easy. When connected over a network the units are controlled using a dedicated software app that is available for both Mac and Windows. This enables you to control the units from any computer on the network or via its dedicated USB port. The set up information can be stored for instant recall within the dedicated app unlike many third party interfaces whose settings cannot be recalled.  

Montarbo® WIND PRO 208A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Montarbo® WIND PRO 208A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Features

• Very high performance-to-size ratio
• 2-channel amplifier 800 W + 800 W RMS
• 132 dB SPL
• Quasi 3-Way acoustic design
• 8” neodimium coaxial speaker with 2” voice coil and 1” Driver with 3” voice coil
• 8” neodimium woofer with 3” voice coil
• 80° conical coverage
• 24 Bit 96 kHz DSP with M-Modelling Technology
• Integrated DANTE
• M-Modelling Technology
• Compatible Softwares: M-Connect and M-Simulation
• Wi-Fi Connection
• M-ID authentication system via app
• Integrated Rigging

Montarbo® WIND PRO 210A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Montarbo® WIND PRO 210A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Features

• Very high performance-to-size ratio
• 2-channel amplifier 800 W + 800 W RMS
• 135 dB SPL
• Quasi 3-Way acoustic design
• 10” ferrite coaxial speaker with 3” voice coil and 1,4” Driver with 3” voice coil
• 10” neodimium woofer with 2,5” voice coil
• 70° horizontal, 50° vertical coverage
• 24 Bit 96 kHz DSP with M-Modelling Technology
• Integrated DANTE
• M-Modelling Technology
• Compatible Softwares: M-Connect and M-Simulation
• Wi-Fi Connection
• M-ID authentication system via app
• Integrated Rigging

Montarbo® WIND PRO 212A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Montarbo® WIND PRO 212A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Features

• Very high performance-to-size ratio
• 2-channel amplifier 1200 W + 1200 W RMS
• 139 dB SPL
• Quasi 3-Way acoustic design
• 12” neodimium coaxial speaker with 3” voice coil and 1,4” Driver with 2,4” voice coil
• 12” ferrite woofer with 3” voice coil
• 70° horizontal, 50° vertical coverage
• 24 Bit 96 kHz DSP with M-Modelling Technology
• Integrated DANTE
• M-Modelling Technology
• Compatible Softwares: M-Connect and M-Simulation
• Wi-Fi Connection
• M-ID authentication system via app
• Integrated Rigging

Montarbo® WIND PRO 215A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Montarbo® WIND PRO 215A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Features

• Very high performance-to-size ratio
• 2-channel amplifier 1200 W + 1200 W RMS
• 141 dB SPL
• Quasi 3-Way acoustic design
• 15” neodimium coaxial speaker with 3” voice coil and 1,4” driver with 2,4” voice coil
• 15” ferrite woofer with 3” voice coil
• 70° horizontal, 50° vertical coverage
• 24 Bit 96 kHz DSP with M-Modelling Technology
• Integrated DANTE
• M-Modelling Technology
• Compatible Softwares: M-Connect and M-Simulation
• Wi-Fi Connection
• M-ID authentication system via app
• Integrated Rigging

The XTP II CP 4o HD AT 4K PLUS is an XTP® output board with four HDMI and Dante digital audio outputs. Dante digital audio output enables audio transport of up to four stereo audio signals over a network using standard Internet protocols. The XTP II CP 4o HD AT 4K PLUS is an XTP® output board with four HDMI and four Dante® digital audio outputs. It is HDCP 2.2-compliant and accommodates data rates up to 18 Gbps for support of video resolutions up to 4K/60 with 4:4:4 color. The Dante output adds the capability to take any four stereo audio signals that are routed through the XTP system and transport them as Dante audio over a network using standard Internet protocols. This XTP output board also supports AES67, along with Audinate® Dante Controller and Dante Domain Manager software. Paired with Extron’s many Dante-enabled audio processing products, the XTP II CP 4o HD AT 4K PLUS board facilitates convenient expansion of XTP Systems as part of a complete networked audio system solution.

The Model 381 On-Air Beltpack offers a unique combination of audio resources to directly support a complete broadcast "stand-up" on-air position.  The Model 381 On-Air Beltpack offers a unique combination of audio resources to directly support a complete broadcast "stand-up" on-air position. Using Dante® audio-over-Ethernet technology, the unit provides main and talkback output channels, talent cue (IFB) input, and sidetone capabilities, as well as essential user controls in a compact, portable package. The Model 381 is compatible with the Dante Domain Manager™(DDM) software application and is AES67-compliant for direct integration into many contemporary networked audio applications. Key Features

• Dante audio-over-Ethernet technology
• Creates complete "stand-up" on-air position
• One main and one talkback output channel
• Highly-flexible 2-channel headphone output
• Integrated sidetone function
• Excellent audio quality
• Uses STcontroller for configuration
• Power-over-Ethernet (PoE) powered

The Model 5412 Audio Interface provides a simple yet high-performance means of interfacing line-level analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. The Model 5412 Audio Interface provides a simple yet high-performance means of interfacing line-level analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. Analog sources can be connected to the unit and then output in the digital domain by way of a Dante interface. Digital audio signals, which also arrive by way of Dante, are converted to analog and then output as balanced line-level signals. For application flexibility and troubleshooting a configuration choice allows other audio signals to be selected as the sources for the analog output channels. The Model 5412 is available in two versions – one with 8 input and 8 output channels and the other with 16 input and 16 output channels. Key Features

• Two versions available: 8 or 16 input and output channels
• Analog line-level inputs to Dante outputs
• Dante inputs to analog line-level outputs
• Three Gigabit Ethernet interfaces
• Standard connectors
• Excellent audio quality
• AC mains and 12 volt DC powering
• Lightweight enclosure, single rack-space (1U) mounting

The Model 5418 Mic/Line Interface provides a simple yet high-performance means of interfacing analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. The Model 5418 Mic/Line Interface provides a simple yet high-performance means of interfacing analog signals with applications that utilize Dante® audio-over-Ethernet media networking technology. Eight analog microphone- or line-level sources can be connected to the unit and then output in the digital domain by way of a Dante interface. Eight digital audio signals, which arrive by way of Dante, are converted to analog and then output as balanced line-level signals. Configuration choices also allow other audio signals to be selected as the sources for the analog output channels. A monitor section allows the input and output signals to be selectively observed using meters and a headphone output. Key Features

• Dante audio-over-Ethernet technology
• Eight mic/line inputs to Dante outputs
• Eight Dante inputs to line-level analog outputs
• Flexible monitoring with metering and headphone output
• Three Gigabit Ethernet interfaces
• Standard connectors
• Excellent audio quality
• AC mains and 12 volt DC powering
• Lightweight enclosure, single rack-space (1U) mounting

Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz) Add up to 128 channels of high-density, low-latency digital audio using Dante (128 channels at 44.1 kHz or 32 channels at 192 kHz)

Though identical in appearance to the SD7, the SD7B goes a stage further as it has been developed for broadcast applications. Though identical in appearance to the SD7, the SD7B goes a stage further as it has been developed for broadcast applications. As well as full Flexi channel capability, routing flexibility has been vastly increased to allow for LCRS and 5.1 mixes as well as stereo and LCR. In addition, broadcast-specific features include a complete 5.1 monitor matrix with 48 x 6 source to speaker selection; mutli channel folding; user defined stem order selection; Mix Minus busses (one per mono channel); backstop PFL (over press) and Auto PFL; and Audio Follow Video implementation.  Scratching the surface A combination of technologies have been seamlessly integrated into the SD7B's worksurface to meet the everyday needs of any engineer. We've managed to pack them into three user-friendly interactive 15-inch high-resolution touch screens, each of which accommodates a bank of 12 faders,  to provide the user with the perfect platform – everything is just 'where it should be'. To make navigation even easier, we've added high-definition interactive meter bridges and multicoloured knobs and switches; and for further functionality and flexibility, 16 assignable faders (one bank of 12, one bank of four) sit neatly below the master screen in the centre of the console, taking the SD7B's fader tally to a sizeable 52. To increase the fader count further for multi-engineer applications and shows, an EX-007 Fader Expansion unit is available. Two EX-007s can be connected via a simple Cat5e connector for remote control or simply to increase your fader count to 100.

Quantum is a newer and smarter engine which offers so much more to users on so many levels, and allows engineers to upgrade into new generation technology with no learning curve whatsoever.  When DiGiCo built SD7, we never thought anyone would fill the console. However, due to the constant rise in production values, and audiences demanding more and more from their favourite artists, tours are now regularly pushing multiple SD7s to maximum capacity. Shows are way bigger than they used to be and as a result, engineers need a lot more outputs, signals, and channels.   To address this issue, we have developed Quantum, a newer and smarter engine which offers so much more to users on so many levels, and allows engineers to upgrade into new generation technology with no learning curve whatsoever. In creating Quantum, we wanted to guarantee that our customer base could maintain a return on their historical investment by providing them an affordable engine upgrade for their existing work surface.  We needed to make the next major technological step forward, into generation seven FPGA technology, and that's what Quantum has done. It will make shows easier to manage, with plenty of room for growth; it's a more flexible system, four generations newer in terms of capacity, therefore so much more can be done with it. Faster, more efficient, future-proof, and way more powerful.