The Extron FOX3 Matrix 160x provides high-performance switching of 4K/60 video, audio, USB, control, and 3D sync over fiber optic cable.
Expandable from 8x8 to 160x160, the matrix features high-bandwidth signal transmission and advanced audio capabilities including DMP expansion, Dante integration with AES67 support, audio breakaway, embedding/de-embedding, and local analog audio insertion/extraction. Two Dante ports provide scalable audio transport over a local area network using standard Internet protocols. The matrix switcher sends out 32 stereo channels of digital audio and can receive 32 stereo channels over the Dante network, and it supports AES67 audio over IP networks standard.
The GTA Otto has been designed to be versatile and easy to use in any operation condition. Equally useful for most subwoofers as well as high power fullrange systems, Outline GTA Otto suites any configuration and purpose.
Ultimately flexible and safe, Outline’s power supply is now suitable to Single Phase, Bi-Phase or Three Phase operation from 85 VAC up to 460 VAC without need of selection. True Three Phase load balancing is directly achievable by the unit without any complex load assignment in the power distribution system. Outline GTA Otto provides eight fully processable channels and selectable inputs from analog sources as well as digital AES3 and two redundant Dante™ streams.
Channel mixing and routing can be easily performed thanks to the integrated revolutionary low latency DSP, providing the highest degree of freedom in sound shaping and speaker management.
Full support to 100 Mbps and Gigabit Ethernet makes it easy to integrate Outline GTA Otto into any existing infrastructure. Completely integrated into Armonía Pro Audio Suite™, the new GTA Otto interface is also available for smartphone and tablet, providing a new experience in power management.
The Extron FOX3 Matrix 80x provides high-performance switching of 4K/60 video, audio, USB, control, and 3D sync over fiber optic cable.
Expandable from 8x8 to 80x80, the matrix features high-bandwidth signal transmission and advanced audio capabilities including DMP expansion, Dante integration with AES67 support, audio breakaway, embedding/de-embedding, and local analog audio insertion/extraction. Two Dante ports provide scalable audio transport over a local area network using standard Internet protocols. The matrix switcher sends out 32 stereo channels of digital audio and can receive 32 stereo channels over the Dante network, and it supports AES67 audio over IP networks standard.
This revolutionary amplifier is designed as a two-channel amplifier using class D amplifier technology. It can be used for powering low impedance stereo systems with a maximum power of 2 x 40 Watt, while bridging to a constant voltage (100V and 70V) is possible with a maximum output power of 80 Watt. A switch-mode power supply allows a wide variation of mains voltages for global compatibility.
The integrated SourceCon™ module* slot allows the implementation of any available compatible module, offering a true all-in-one solution. Typical applications are the implementation of an audio streaming module or internet radio module. Additionally, a stereo line input allows connection for any kind of external audio sources.
A balanced mic/line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled and compatibility with line-level sources (e.g. voice file players) is guaranteed by wide gain adjustment (0 dB ~ +50 dB). Thanks to the 2.8” TFT display and the push rotary dial on its front, an unmatched user experience is achieved.
The MFA series are both RS232, RS485 and TCP/IP controllable allowing implementation with home & industrial automation systems and peripheral devices. Using the freely available AUDAC Touch™ 2 application, control and configuration can be done from any portable or non-portable device on any location and at any time.
Desktop installation or mounting in an equipment rack using the MBS1xx series mounting adapters is possible. The half 19” rackspace enclosure allows single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack.
The Extron FOX3 Matrix 40x provides high-performance switching of 4K/60 video, audio, USB, control, and 3D sync over fiber optic cable.
Expandable from 8x8 to 40x40, the matrix features high-bandwidth signal transmission and advanced audio capabilities including DMP expansion, Dante integration with AES67 support, audio breakaway, embedding/de-embedding, and local analog audio insertion/extraction. Two Dante ports provide scalable audio transport over a local area network using standard Internet protocols. The matrix switcher sends out 32 stereo channels of digital audio and can receive 32 stereo channels over the Dante network, and it supports AES67 audio over IP networks standard.
The Extron FOX3 Matrix 24x provides high-performance switching of 4K/60 video, audio, USB, control, and 3D sync over fiber optic cable.
Expandable from 8x8 to 24x24, the matrix features high-bandwidth signal transmission and advanced audio capabilities including DMP expansion, Dante integration with AES67 support, audio breakaway, embedding/de-embedding, and local analog audio insertion/extraction. Two Dante ports provide scalable audio transport over a local area network using standard Internet protocols. The matrix switcher sends out 32 stereo channels of digital audio and can receive 32 stereo channels over the Dante network, and it supports AES67 audio over IP networks standard.
This revolutionary amplifier is designed as a two-channel amplifier using class D amplifier technology. It can be used for powering low impedance stereo systems with a maximum power of 2 x 80 Watt, while bridging to a constant voltage (100V and 70V) is possible with a maximum output power of 160 Watt. A switch-mode power supply allows a wide variation of mains voltages for global compatibility.
The integrated SourceCon™ module* slot allows the implementation of any available compatible module, offering a true all-in-one solution. Typical applications are the implementation of an audio streaming module or internet radio module. Additionally, a stereo line input allows connection for any kind of external audio sources.
A balanced mic/line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled and compatibility with line-level sources (e.g. voice file players) is guaranteed by wide gain adjustment (0 dB ~ +50 dB). Thanks to the 2.8” TFT display and the push rotary dial on its front, an unmatched user experience is achieved.
The MFA series are both RS232, RS485 and TCP/IP controllable allowing implementation with home & industrial automation systems and peripheral devices. Using the freely available AUDAC Touch™ 2 application, control and configuration can be done from any portable or non-portable device on any location and at any time.
Desktop installation or mounting in an equipment rack using the MBS1xx series mounting adapters is possible. The half 19” rackspace enclosure allows single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack.
AD500.4 is a compact, light and powerful Class-D multi-channel amplifiers dedicated to fixed installations. It delivers 500 W x 4 /4Ω and includes a Dante Ultimo card for audio transport.
The Extron XMP 240 C AT Expansion Matrix Processor features an extensive mix matrix with 24 channels of AEC and 48x48 Dante connectivity in only a half rack space.
The XMP 240 C AT can also be used standalone for matrix processing in an all network audio system. When connected to a DMP Plus Series processor via Dante or the EXP expansion port, a complete system is created that features up to 36 channels of AEC, a USB audio interface, analog connectivity, and optional VoIP. A system expanded with an XMP 240 C AT is capable of supporting multiple beam forming microphone arrays alongside numerous other Dante sources, with enough outputs to support multiple zones and destination devices. Ideal for network audio systems based on Dante or AES67, the XMP 240 C AT allows for high channel count audio input and output processing.
AD500.2 is a compact, light and powerful Class-D amplifiers dedicated to fixed installations. It delivers 500 W x 2 /4Ω and includes a Dante Ultimo card for audio transport.
Lightware's VINX series devices are popular products, which can also run in point-to-point configuration and have diverse application possibilities, especially recommended for applications where scalability, flexibility and rapid deployment are in focus. The VINX-120AP-HDMI-ENC-DNT model is Dante-enabled.
They are simple to install and to operate, and have numerous built-in services most other manufacturers only provide for an extra cost. The open API of the VINX devices allow easy integration with third party systems.
The CMX DSP-4500 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4350 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4240 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4120 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4060 is a power amplifier with DSP and Dante.
4 x 60W power amplifier
100V, 70V, 4 Ohm & 8 Ohm output with selectors
Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
Dante network control with 4 In 4 Out matrix
Two Ethernet RJ-45 network connector for both Dante and DSP configure
Remote GPIO for failure outputs
1U height 19” rack mount type power amplifier
Balanced line input by phoenix connector for four channels.
Each four inputs with separate gain control.
Separate four channel indicators for protection, clip, input and output.
Complete short circuit, overload, high temp, clip and DC protection.
Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The R210+ is a 210cm active column, which is designed to be mounted vertically.
With a nominal range of 42m, it offers a high-quality alternative for larger spaces in airports, train and underground stations, conference rooms, churches or shopping malls when you need to run the audio over a network.
Ray-On+ is reserved for indoor use, it cannot be subjected directly to rain.
The R110+ is a 110cm active column, which is designed to be mounted vertically.
With a nominal range of 20m, it offers a high-quality alternative for medium sized spaces in airports, train and underground stations, conference rooms, churches or shopping malls when you need to run the audio over a network.
Ray-On+ is reserved for indoor use, it cannot be subjected directly to rain.
The R70+ is an 70cm active column, which is designed to be mounted vertically.
With a nominal range of 12m, it offers a high-quality alternative for smaller spaces in airports, train and underground stations, conference rooms, churches or shopping malls when you need to run the audio over a network.
Ray-On+ is reserved for indoor use, it cannot be subjected directly to rain.
-35개 오디오 입력과 24개 오디오 출력채널 지원 -디지털 오디오 믹서와 시스템 제어 PC 및 단테 네트워크 오디오 통합구성 -20채널 오디오 입력, 14채널 오디오 출력 -Dante BK2 16x16 지원 -통합 방송 환경 운영지원 GUI-외부 모니터 FULL HD 지원 -USB 2.0 2포트 지원 -마우스 키보드 지원-WIDOWS 10 IoT 환경 -10.1" 터치스크린 화면 내장 -EM. Timer 방송 SD Card를 이용한 편집지원 -다양한 롱신제어 환경 제공 -PC와 메인장비의 이중 연동 지원 -디지털 오디오믹서 기능 -EM / CHIME /TIMER /MATRIX 기능 -EM / TIMER SD Card 개별 편집 음원 적용 -SFP Optic 단테를 이용한 무손실 음원 및 통신제어 -내장형 10.1 " 터치 스크린으로 All-in-One 제어 환경 지원 D -PC 기반 유틸리티 프로그램을 사용한 다양한 방송환경 구축
SPECIFICATIONS
입력 및 출력 XLR입력 (6개),TRS입력(3개),XLR출력(8개) 단테 SFP Gigabit 광모듈, RJ45케이블 사용전원 DC+24V, 1.5A 외형규격 (WXHXD)mm 482mmx177mmx350mm 무게 7.0kg
The DAC-122 is an audio matrix, equipped with two inputs, that enables you to send uncompressed audio with low latency using standard TCP/ IP Ethernet network. It’s remotely controlled through your network and can be placed anywhere in a facility.
Each of the 2 balanced analog inputs and 2 outputs may be assigned to any Dante™ flow in the system, either by means of the Audinate’s Dante™ Controller Windows or OSX application.
The D-6000 is a high power professional amplifier specially designed for the sound re-enforcement market also referred to as SR, which incorporates a DSP, Digital Signal Processor and Audinates’s Dante™ digital audio network.
Dante delivers low latency, robust synchronization, I/O scalability, and installation simplicity via standard IT technology.
The D-6000 will deliver up to 4800 watts of power per channel down to 4 ohm loads. Housed in two RU compact frameworks, the D-6000 Class D amplifier offers high power with reduced size and weight.
The combination Class D topology amplification circuitry combined with SMPS (Switch Mode Power Supplies) creates a high efficiency amplifier that offers reduced power consumption and low heat dissipation. The D-6000 is ideal for applications where high power and efficiency is required. This may include houses of worship, arenas, stadiums, concert venues, touring or any other large-scale facilities.
The Yamaha SWR switch lineup, featuring high-performance L2 switches for fixed installations, has been expanded to provide a wider range of models for a wider range of applications.
In addition to VLAN functionality, the new SWR2310-28GT and SWR2310-18GT offer high port counts and features such as 10G uplink ports for long-distance transmission of multichannel 96 kHz data, making them ideal choices for safe, stable backbone operation in large-scale systems. As with other SWR/SWP switches, Yamaha LAN Monitor software provides clear visual system status monitoring that makes Dante system setup easy.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
