Cart
← Back to Product Catalog

Ecler – WP22DN

I/O Interfaces

More details

Similar Products

clockaudio-cdt-100_600px
  • Clockaudio

Clockaudio – CDT 100

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol. By taking advantage of the advanced Dante technology and based on the high performance and pre-configurable hardware platform, this product transfers audio and control signals via widely used Ethernet and is able to guarantee perfect sound quality. The CDT 100 has a variety of uses including but not limited to boardrooms, conference rooms, video conference rooms and any place else where multiple table microphones and control devices are connected back to the AV equipment cabinet. Features
  • Easy to install with under table mounting
  • Audio and control signals transported over Dante
  • 4 audio inputs, multiple units may be daisy chained (maximum of 6 units on a single CAT-5)
  • Provides Phantom Power for each mic input
  • 4 control inputs compatible with all Clockaudio devices including:
    • direct connection to CH32 LItetouch switch & LED, TS001, Retracta CRM202S-RF, CS-S Series, SM80S, S80S
    • direct connection to ARM-C controller
  • Open API for interfacing with Control Systems
  • Compatible with any Dante capable audio DSP
    I/O Interfaces
  • Dante Ch: 2x4
  • 24-bit
See the product
audioscience-8-8m_1200px
  • AudioScience

AudioScience – Iyo 8.8M

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8M provides 8x8 balanced analog audio inputs and outputs. The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8M provides 8x8 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status. The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller. Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack. All units can also be operated in AES67 interoperability mode.
    I/O Interfaces
  • Dante Ch: 32x32
  • 24-bit
See the product
Neutrik-NA2-IO-DPRO
  • Neutrik

Neutrik – NA2-IO-DPRO

The NA2-IO-DPRO allows microphone-level signals and AES/EBU signals to be injected into or taken out of the Dante network. Besides acting as a Dante converter, NA2-IO-DPRO can also operate as an AES/EBU converter: microphone inputs can simultaneously be injected into the Dante network and sent to an OB van (for example) via an AES/EBU signal fed from the device’s XLR output. The NA2-IO-DPRO allows microphone-level signals and AES/EBU signals to be injected into or taken out of the Dante network. Besides acting as a Dante converter, NA2-IO-DPRO can also operate as an AES/EBU converter: microphone inputs can simultaneously be injected into the Dante network and sent to an OB van (for example) via an AES/EBU signal fed from the device’s XLR output. Digital audio networks simplify routing and distribution of audio signals for fixed installations, touring and event applications. Neutrik‘s Dante interface series and the numerous mounting options provide a complete solution for integrating legacy audio gear into the Dante network.
    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit, 32-bit
See the product