AudioScience - Iyo Dante 32.0M

AudioScience – Iyo Dante 32.0M

Product Information

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0M provides 32 balanced analog audio inputs and 0 outputs. With terminal block connectors.

Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With Terminal block termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

Specifications

Dante Ch: 32x0
Bit Depth: 16-bit, 24-bit, 32-bit
Sample Rate: 44.1kHz, 48kHz, 96kHz
AES67 Enabled

SSL – X-Light Bridge

For the touring market, a new 1U X-Light Bridge interface designed to be deployed within stage I/O racks, features a fully redundant pair of X-Light connections using Neutrik opticalCON Quad format connectors on the front panel. For the touring market, a new 1U X-Light Bridge interface designed to be deployed within stage I/O racks, features a fully redundant pair of X-Light connections using Neutrik opticalCON Quad format connectors on the front panel. On the rear panel there are two redundant pairs of Neutrik etherCON format Dante connections for audio and control distribution. Up to eight SB 32.24 stageboxes can now be connected via a pair of network switches to a single X-Light Bridge redundantly at 96 kHz with gain control of each input. There are no big workflow changes either! X-Light Bridge provides a seamless I/O boost for the user, as the routing process in the console interface is exactly the same via the X-Light Bridge as it is via the existing local Dante Expander Module. This includes the ability to configure the X-Light channel capacity as Virtual Tie Lines, for routing in Dante Controller, or as Dual Domain Routes for seamless routing and control from console channels.

I/O Interfaces

Dante Ch: 256x256
24-bit

See the product

Klark Teknik

Klark Teknik – DN9652

The DN9652 Dual Network Bridge has been designed to allow two dissimilar digital audio networks to interface simply and reliably.

I/O Interfaces

Dante Ch: 64x64
16-bit, 24-bit, 32-bit

See the product

Bose Professional

Bose – ControlSpace WP22B-D

The Bose® ControlSpace WP22B-D Dante audio interface is a cost effective multi-I/O wall box. The WP22B-D features two balanced mic/ line XLR inputs and two balanced XLR line outputs. The WP22B-D is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The size of the WP22B-D makes it easy to put Dante connectivity close to analog devices, helping to reduce costly and interference-prone analog wiring.

I/O Interfaces

Dante Ch: 2x2
24-bit

See the product

AudioScience – Iyo Dante 32.0M

Product Information

Specifications

Similar Products

SSL – X-Light Bridge

Klark Teknik – DN9652

Bose – ControlSpace WP22B-D

Stay connected to Dante

Support

Company

Dante Networking Alliance