The DCA901 opens new possibilities for capturing sound in broadcast and media production. This compact digital broadcast microphone array delivers eight channels of high-fidelity audio through a single network cable. Steerable pickup zones isolate the sounds that matter while minimizing ambient noise. With built-in DSP, fewer cables, and faster setup, it replaces bulky analog systems while supporting experiential, story-driven sound and modern production workflows.
Capture up to eight isolated audio channels from a single broadcast array microphone
Steerable lobes let you virtually adjust pickup zones, reducing mic count and eliminating the need to reposition gear
A single Dante or AES67 connection delivers audio, power, and control, simplifying routing and minimizing failure points
Built-in DSP handles EQ, compression, delay, and automixing, giving you more time to focus on creative sound design
Actively supports REMI workflows and alternate feeds with flexible routing and remote lobe control
Presets streamline deployments and ensure consistent configurations across shows or seasons
Supports seamless 5.1 immersive capture and stereo conversion for both modern and legacy formats
Low profile design installs cleanly in stadiums, studios, or mobile setups and blends into camera-ready environments
The Trinnov Amplitude16 is a 16-channel Class D power amplifier designed for high-performance home theater, and with the optional Dante® input board it becomes a fully networked amplification solution. This upgrade enables direct AoIP connectivity, allowing the amplifier to receive digital audio streams from processors like the AltitudeCI without any analog conversion. Both products share the same high-performance DAC architecture, ensuring identical conversion quality and seamless sonic consistency, even when the DAC stage is relocated closer to the loudspeakers. With support for bridging channels to deliver higher power where needed, the Amplitude16 offers unmatched flexibility, from driving LCRs to powering multi-subwoofer WaveForming™ arrays. Compact yet powerful, it provides integrators with a streamlined, all-digital signal path that reduces cabling complexity while maintaining audiophile standards. Together with the AltitudeCI, the Amplitude16 Dante® forms the backbone of a complete, scalable, and networked home theater ecosystem
The Trinnov AltitudeCI is a new-generation AV processor designed for home theater and custom installation, built from the ground up around Audio over IP. Supporting both Dante® (hardware) and Ravenna/AES67 (software), it offers unmatched interoperability: plug-and-play simplicity for residential theaters and compatibility with Dolby media servers. AltitudeCI provides up to 32 channels today, expandable to 64 in 2026, with a modular licensing model that allows integrators to scale in 2-channel increments. Its architecture enables hybrid routing across analog, AES/EBU, and AoIP outputs, while three independent Ethernet ports (RJ45 + dual SFP) provide redundant, segregated, or switch-mode networking for maximum flexibility. Combined with Trinnov’s exclusive technologies, Optimizer™, WaveForming™, and Remapping™, AltitudeCI ensures uncompromising performance with the flexibility and efficiency of a fully digital signal chain. Paired with the Amplitude16 Dante® amplifier, it forms a complete end-to-end AoIP ecosystem.
he Gateway 4 is a powerful DSP-based 1RU IP codec designed for live remote broadcasting applications, as well as STL or SSL links. It can route compressed and uncompressed IP audio streams throughout the broadcast plant with native support for AES67, ST 2110-30, ST 2022-7, RAVENNA, Livewire+, AMWA NMOS IS-04 and IS-05, Ember+, AES3 and analog I/O as standard. An optional Dante or WheatNet-IP card is also available. This facilitates acting as a media converter to simplify audio routing between a range of equipment using proprietary AoIP protocols like WheatNet-IP, Dante and Livewire, plus devices supporting RAVENNA, AES67 and ST 2110-30. It supports 4 full-duplex audio channels to provide two stereo connections, or one stereo and two mono connections, or up to 4 mono connections. It also supports multiple unicasting to 20 endpoints and multicasting. Configure with the built-in embedded HTML5 Toolbox Web-GUI interface or Tieline’s Cloud Codec Controller.
The Gateway is a DSP-based IP codec which can transport 16 channels across the public internet and any QoS-enabled IP network. It can route compressed and uncompressed IP audio streams throughout the broadcast plant with native support for AES67, ST 2110-30, ST 2022-7, RAVENNA, Livewire+, AMWA NMOS IS-04 and IS-05, Ember+, AES3 and analog I/O as standard. An optional Dante or WheatNet-IP card is also available. This facilitates acting as a media converter to simplify audio routing between a range of equipment using proprietary AoIP protocols like WheatNet-IP, Dante and Livewire, plus devices supporting RAVENNA, AES67 and ST 2110-30. It supports 16 full-duplex audio channels as well as multiple unicasting to 80 endpoints and multicasting. Transport of phase-locked multichannel audio in 5.1 or 7.1 formats is also supported. Configure with the built-in embedded HTML5 Toolbox Web-GUI interface or
A compact A/V switcher in the EasyIP ecosystem, the EasyIP Dock connects in EasyIP cameras, video, and audio to a computer while simultaneously extending that computer’s HDMI output over the network for flexible presentation and conferencing spaces.
Features:
Manages up to four EasyIP cameras or EasyIP video sources with switching and camera control
1080p/60 video over USB 3.0 with USB 2.0 backwards compatibility and AEC
HDMI In converts to EasyIP output for networked extension with simultaneous HDMI output loop
8x8 Dante audio matrix (15x13 full cross-point audio matrix)
EasyIP Multicast allows content sharing with any number of EasyIP endpoints or destinations
The MXW neXt wireless microphone system is the next step in audio for hybrid events. With state-of-the-art wireless transmission, convenient rechargeability, powerful audio processing, and flexible controls and connections, it’s the most versatile wireless audio solution for collaboration. The Microflex® Wireless neXt system is the perfect solution for meeting rooms with flexible seating, rooms where audio cables are impractical, or rooms that are used only occasionally.
The MXW neXt wireless microphone system delivers flawless audio for the people in the room and those joining remotely, whether it’s a presentation, team conference, or training session.
MXW neXt eliminates inconvenient audio cables, allowing you to place microphones where you want them, when you want them. Wireless microphones accommodate any table arrangement or meeting format, whether it’s a presentation, panel discussion, or board meeting.
With a choice of rechargeable transmitters that eliminate the need for disposable batteries, powerful IntelliMix DSP for outstanding sound quality, and the ability to extend audio coverage in larger rooms, MXW neXt is the premier wireless audio solution for meeting and training rooms.
The MXW neXt wireless microphone system is the next step in audio for hybrid events. With state-of-the-art wireless transmission, convenient rechargeability, powerful audio processing, and flexible controls and connections, it’s the most versatile wireless audio solution for collaboration. The Microflex® Wireless neXt system is the perfect solution for meeting rooms with flexible seating, rooms where audio cables are impractical, or rooms that are used only occasionally.
The MXW neXt wireless microphone system delivers flawless audio for the people in the room and those joining remotely, whether it’s a presentation, team conference, or training session.
MXW neXt eliminates inconvenient audio cables, allowing you to place microphones where you want them, when you want them. Wireless microphones accommodate any table arrangement or meeting format, whether it’s a presentation, panel discussion, or board meeting.
With a choice of rechargeable transmitters that eliminate the need for disposable batteries, powerful IntelliMix DSP for outstanding sound quality, and the ability to extend audio coverage in larger rooms, MXW neXt is the premier wireless audio solution for meeting and training rooms.
Yealink AP08 DSP, a cutting-edge digital signal processor, elevates your meeting experience with exceptional automation capabilities. It supports up to 16x16 Dante audio channels, including 8 optimized channels with dynamic AEC, intelligent noise cancellation, and reverberation suppression, as well as 4x4 analog audio channels and two simultaneous USB 3.0 Type-B device interfaces. The AP08 DSP ensures smooth audio transmission and crystal-clear communication. Additionally, it provides PoE+ power for up to three audio devices, simplifying your deployment even further.
With Yealink Room Designer software, the AP08 DSP seamlessly integrates automated design and acoustic environment-adaptive technology, setting a new standard for audio quality and convenience in your meetings. Choose Yealink AP08 DSP for an unparalleled audio experience.
The CS10-D ceiling speaker is available in two editions to suit various needs.
Featuring support for the Dante audio transmission protocol, the CS10-D seamlessly integrates with a wide range of standard Dante devices, delivering a versatile and convenient collaborative experience.
The Loudspeaker features a low-profile (120mm depth) 2-way coaxial design and a removable magnetic suction mesh cover*. The CS10 blends high-quality audio with an elegant, minimalist design, making it a perfect match for contemporary conference rooms.
With 127 wide-range microphones, the Yealink CM50 provides superior audio coverage within a 5-meter radius*. Its advanced beamforming technology supports customized pickup zones, allowing precise control over audio capture and reducing unwanted background noise.
The CM50 integrates AI-based sound optimization to ensure immersive sound quality. With support for Dante protocol , it ensures easy integration with other Dante-compatible devices.
The Microflex MXN-6 Networked Pendant Loudspeaker provides high-quality speech reproduction for AV conferencing applications. The PoE-powered MXN-6 is the ideal loudspeaker solution when used as part of a Shure networked conferencing audio system. Combined with Microflex Advance Array Microphones and IntelliMix® DSP solutions, the full Shure Microflex Ecosystem delivers premium audio performance with an unmatched ease of deployment.
The ultimate high-tier, high channel count wireless receiver, Shure ANX4 receives up to 16 channels of Shure Axient Digital or 24 channels of Shure ULX-D wireless audio in a single rack space. Delivering maximum flexibility, ANX4 does not ship preconfigured with active wireless channels, allowing you the opportunity to purchase channels in single- and four-channel increments and activate the exact number of channels you need. Licenses can be activated in one ANX4 and later removed and activated in a different ANX4 as needs change. ANX4 channel licenses can be purchased through the same authorized suppliers ANX4 hardware units are sold (or at Shure.com/anx4) and managed via your ShureCloud user account.
All the exceptional features found in award-winning Axient Digital and ULX-D receivers that have made them standards on stages, in facilities, on tour, and on location throughout the world are available in the ANX4**. Whether you operate ANX4 in Axient Digital or ULX-D transmission mode, ANX4 maximizes your budget, rack space, and rack weight in delivering large wireless audio channel counts in a single rack design. What’s more, this 1RU format also enables streamlined antenna configurations for large channel count environments. *ANX4 receiver does not ship preconfigured with active wireless channels. Channel licenses are sold separately and required for operation. **System features are dependent upon activated transmission mode: Axient Digital or ULX-D (ANX4 does not support both systems at one time).
The TeamConnect Ceiling Medium Ceiling Tile (TCC M CT) allows for even easier installation of the TCC M into suspended grid ceilings, thereby reducing installation time and costs for integrators on site. The tile comes in a 60 cm square solution and a 2 ft square solution, primarily for the US market.
The TCC M allows integrators the versatility to offer elevated meeting experiences across a range of flexible and hybrid meeting spaces and learning environments. With its adaptive, intelligent beamforming technology, the TCC M ensures Trusted Sennheiser Audio Quality every time. Seamless integration with single cable mode and numerous design and installation options ensure TCC M transforms any room into a hub of collaboration.
Relacart has recently launched an innovative ceiling microphone array – a solution integrating cutting-edge AI technology and advanced acoustic engineering, designed to deliver exceptional audio quality in any space. Our ceiling microphone is not just a technological innovation, but also the optimal audio solution for users in venues like conference rooms and classrooms. It ensures every word is accurately conveyed and no sound detail is overlooked.
ZUHD60-2DA is an HDMI 2.0a Dante-enabled AVoIP Decoder that is part of the ZyPerUHD60 product line. It supports IP streaming up to 4KP60 4:4:4 resolution with embedded audio and HDCP 2.3 encryption. This AVoIP decoder has dual 1G LAN ports and a 5-pin Phoenix/Euroblock connector for analog audio out. Other features include USB, IR, and RS-232 (via 3-pin Phoenix/Euroblock).
ZUHD60-2EA is an HDMI 2.0a, Switching, triple-input, Dante-enabled Encoder (Dual HDMI and USB-C) that is part of the ZyPerUHD60 product line. It supports IP streaming up to 4KP60 4:4:4 resolution with embedded audio and HDCP 2.3 encryption. This encoder has a 5-pin Phoenix/Euroblock connector for analog audio in/out and gigabit copper.
DuetD-5-WP is a wallplate decoder designed for clean, in-wall installations. It features an HDMI output and two USB-C ports, delivering full USB-over-IP support consistent with the capabilities of Visionary’s 5 Series decoders. The DuetD-5-WP is ideal for setups using USB cameras, touch panels and other HID peripherals in soft codec environments.
The DuetE5-WP-C wallplate encoder combines USB-C and HDMI inputs into a two-gang form factor. It enables AV-over-IP encoding of both 4K60 4:4:4 video and USB sources from USB-C or HDMI-equipped devices, making it ideal for BYOD environments. The USB-C port supports DisplayPort Alt Mode video, USB-over-IP and AES67/Dante audio embedding and de-embedding — all through a single connection — while maintaining interoperability with Visionary’s 5 Series ecosystem.
Introducing the next-generation DuetE5-WP-BT 4K60 4:4:4 Wallplate AV over IP Encoder from Visionary Solutions. Building on the widely adopted PacketAV® Duet Wallplate Encoder, which brought true convergence of Dante®/AES67 and Video over IP in a convenient wallplate form-factor, the DuetE5-WP-BT raises the bar with enhanced features and powerful capabilities.
The DuetE5-WP-BT delivers stunning 4K60 4:4:4 video with accurate color reproduction and smooth motion handling, ensuring exceptional performance in various AV applications. The next-generation wallplate encoder continues to support Dante®/AES67 audio, providing seamless integration with professional audio systems and networks.
The DuetE5-WP-BT features built-in bi-directional Bluetooth® wireless audio connectivity, enabling effortless streaming of audio from Bluetooth®-enabled devices and expanding the range of supported audio sources. The wallplate encoder can be easily mounted in a wall, tabletop, lectern, or floor box using a standard 2-gang US or UK back box, simplifying installation and offering a sleek, unobtrusive design. The DuetE5-WP-BT connects to power (standard POE) and Ethernet using only a single category cable, streamlining deployment and reducing cable clutter.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
