Two versions of the NexSys Nx-8 Network Audio Interface modules are available supporting Dante and CobraNet steaming audio protocols. Both cards deliver eight (8) channels of streaming audio to Crest Audio networkable power amplifiers.
The Versarray™ Pro 218 Sub Powered Subwoofer speaker system consists of a pair of 18″ Low Rider® woofers combined with a super-solid cabinet with a simple, quick, yet flexible rigging system. Designed to provide modular coverage of small to medium venues, and intended for use with the companion Versarray™ Pro 112 models, the Versarray™ Pro 218 Sub offers excellent versatility with a very high performance capability. The subwoofer system consists of the following woofer components: a pair of 18″ Low Rider® series woofers with a very long throw 4″ voice coil structure. Capable of over 800W of continuous power handling (AES Std 2-1984) each, these woofers can project a lot of low frequency energy.
The Versarray™ Pro 218 Sub incorporates Peavey’s UniVent™ air pumping venting system. The UniVent™ venting system literally pumps air through the enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. This helps keep the woofer operating temperatures from getting so high, and increases reliability and reduces power compression under heavy continuous drive conditions. The air pumping action is achieved without excessive turbulence or any significant net asymmetry of total vent air flow.
Power for both woofers is supplied by some very efficient power amplifier systems, controlled by a sophisticated and refined DSP operations system with Dante connection capability. Total system power is 3000W total peak power, with 1500W total sine wave power for the woofers. This sheer power is controlled precisely and processed by a high performance DSP system, which provides all the crossover and EQ functions, as well as providing all limiting, compression and driver protection duties with unfailing attention to every detail of the music.
An optional special groundstack bracket set mounts to the Versarray 218 Pro Sub, and allows up to three of the Versarray™ Pro 112’s to be mounted on top of the Versarray 218 Pro Sub, and angled upward, for use on stage in a stadium seating situation.
The MDM32 is a Dante Brooklyn II based 32x32 Interface card for all NION frames and the CAB4n audio bridge. The MDM32 replaces the discontinued DLM Interface and brings added Dante features such as Device Lock, support for DDM and AES67 compatibility.
The Q-SYS™ Core 110f processor is the latest addition to the Q-SYS™ Core family providing a fully integrated audio, video and control solution for small, single-room projects up to the largest Enterprise scale deployments.
This processor can be automatically connected to your Q-SYS Reflect Enterprise Manager, a powerful monitoring and management platform for the Q-SYS Ecosystem.
The Soundweb London BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.
The BLU-100 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.
This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
The BLU-100 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices.
Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.
Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-100 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
The speaker is Power supply via POE+ (Power over Ethernet) or DC19V power supply, available at option. The speaker includes a Class-D Audio Power amplifier which provides effective use of power.
The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.
The system comes with 3” 30W loudspeaker driver, MNS-3AXXRWFS-1P that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
[Model:MNS-3A11RWFS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-3A12RWFS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-3A22RWFS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
The MONISMS MNS-6AXXWS-2P is a digital steerable active wall-mounted wooden speakers with DANTE®-Input.
Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including museums, churches, conference-rooms and many more challenging spaces and environments.
With its two-channel DANTE®-input integration into existing IP-networks as well as a direct integration to other DANTE®-enabled products is simple.
[Model:MNS-6A11WS-2P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-6A12WS-2P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-6A22WS-2P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
The MONISMS MNS-8BXXWS-2P [MONISMS Model:MNS-8B11WS-2P / MNS-8B12WS-2P / MNS-8B22WS-2P] is a digital steerable active wall-mounted wooden speakers with DANTE®-Input.
Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including museums, churches, conference-rooms and many more challenging spaces and environments.
MNS-8BXXWS-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.
[Model:MNS-8B11WS-2P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-8B12WS-2P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-8B22WS-2P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
The MONISMS MNS-4AXXICS-2P is a digital steerable active column-speaker with DANTE®-Input.
Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including museums, churches, conference-rooms and many more challenging spaces and environments.
The DANTE/AES67 column-loudspeaker advances the MONISMS Architectural line of modular arrays with a self-powered electronically-steerable loudspeaker offering consistent audio levels with outstanding vocal intelligibility and full range music reinforcement.
MNS-4AXXICS-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.
[Model:MNS-4A11ICS-2P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-4A12ICS-2P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-4A22ICS-2P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 60W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.
MNS-AMP60XXA-1A MAX power 60W, Which build-in AC 100-240V [50/60Hz] power module.
Dante Audio Amplifier can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.
[Model:MNS-AMP6011A-1A] 1 Channel, 60W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP6012A-1A] 1 Channel, 2*30W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP6022A-1A] 2 Channels, 2*30W Output, [2 Pairs Speaker Terminals].
The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 30W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.
MNS-AMP30XXA-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.
Dante Audio Amplifier can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.
[Model:MNS-AMP3011A-1P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP3012A-1P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP3022A-1P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].
The MONISMS MNS-8AXXWS-2P [MONISMS Model:MNS-8A11WS-2P / MNS-8A12WS-2P / MNS-8A22WS-2P] is a digital steerable active wall-mounted wooden speakers with DANTE®-Input.
Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including museums, churches, conference-rooms and many more challenging spaces and environments.
MNS-8AXXWS-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.
[Model:MNS-8A11WS-2P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-8A12WS-2P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-8A22WS-2P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
The speaker is Power supply via POE+ (Power over Ethernet) or DC19V power supply, available at option. The speaker includes a Class-D audio power amplifier which provides effective use of power.
The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.
The system comes with 6.25” coaxial 60W loudspeaker driver, MNS-6AXXCS-2P [MONISMS Model:MNS-6A11CS-2P / MNS-6A12CS-2P / MNS-6A22CS-2P] that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
MNS-6AXXCS-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.
[Model:MNS-6A11CS-2P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-6A12CS-2P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-6A22CS-2P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
1. Terminal Amplifier, 40W output power.
2. One-way RD port for connecting remote controller.
3. Two-way MIC/LINE input with phantom power.
4. Two DANTE network interfaces .
5. Automatically fault detected: speaker Line /Control input connection/device local fault etc.
6. Electrical parameter:
-Max input : 10dB
-Noise floor <-88dB
-THD+N<0.05%@1/8 Power
-Frequency response : 20~16KHz
-Speaker ouput : 40W ,4 ohm ,SNR>85 dB
1. Maxim up to 256 output zones in one system.
2. Both master amplifier and extension amplifier have total 360W output power and 6 output zones.
3. Backup amplifier is available for both master amplifier and extension amplifier. Automatically switched to backup amplifier when master one faults.
4. The communication between master amplifier and extension amplifier is base on DANTE network.
5. Maximum up to 32PCS of Emergency MIC or paging MIC configured simultaneously as well as 128 priority level setting involved.
6. Automatically fault detected: speaker Line/Control input connection/ device local fault etc.
7. Record the fault event/ emergency operation log automatically.
8. Automatically alarm audio message or normal audio message broadcast is available in this system.
9. DC24V backup power port.
10. BGM player with timer function.
11. Integrated with VOIP system for telephone broadcast function.
12. Easy to set up the system with PC software.
13. Relevant functions are compliant with Chinese fire regulation. System controls the master, can realize following extension functions if used with this device together.
- Running status of system display
- Audio input port extension: (Optional input module)
- Audio output port extension:(Optional output module)
- 2-way BGM sound voice or 1-way BGM sound source&1-way real-time records (Optional BGM module).
-VOIP telephone broadcast function (Optional VOIP module)
- Linkage with fire system such as ADS etc.
1. Master amplifier unit. Only one master amplifier unit can be connected in one system.
2. One Emergency MIC.
1. The max power can reach 360W and output via 6 zone.
2. Three-way MIC/LINE input with phantom power and one BGM input
3. Six-way controllable 24V power supply output controls.
4. Backup power DC24 input connector.
5. Build in 16M flash. For store alarm audio message or normal audio message.
6. Automatically alarm audio message or normal audio message broadcast is available via GPIO control input.
7. Two-way emergency control input and six normal control input.
9. DANTE network interface.
10. Automatically fault detected: speaker Line/ Control input connection / device local fault etc.
11. Relevant functions are compliant with Chinese fire regulations.
BGM-100 is a professional sound player compatible with MP3 and WAV audio format. It supports PM3 and WAV sound format and can manage program play up to 1000 hours.
DCS-100M is the Main frame of the DCS-100 Digital Conference System also consisting of DCS-101D Chairman Mic station, DSC-102D Delegate Mic station and DCS-103B Booster. DCS-100 focuses on various types of venues like boardrooms, business centers, courtrooms, town halls and regional assemblies. Easy to use and quick to install, it delivers superb sound quality with sophisticated features.
BR-10X6 is a network switching audio processor mainly used for local education and remote interactive education. It is equipped with high-performance digital audio processing technology, including full-band adaptive echo cancellation, automatic noise suppression, and feedback suppression algorithms. Tone microphone, easy installation, simple operation, comes with 6 network ports, supports PoE, 10 / 100M adaptive, 100 meters transmission distance, IEEE802.3at, single port maximum power 30W, 12/36 power supply. Easily meet the high-quality voice needs of local sound reinforcement, recording and broadcasting and remote interactive education.
● Built-in echo cancellation, feedback suppression, and noise algorithms
use a stable two-way simultaneous talk (Double Talk) detection method, which can effectively eliminate redundant echoes even in strong background noise and nonlinear distortion environments; noise suppression algorithms can track quickly and accurately Ambient noise changes and maintains good output sound quality.
● Two-channel MIC input
Provide two microphone interfaces, support gain adjustment, 48V phantom power supply. Increase the flexibility of users to meet the needs of users.
● Two-channel remote audio input
Provides two linear input interfaces, which are usually used to access remote signals during interactive and distance teaching, that is, reference signal adaptive echo cancellation.
● Two-channel local linear input
Provides two linear input interfaces, usually connected to local audio sources, such as DVD, laptop, etc.
● Four-channel Dante network audio input
Provides four Dante network audio inputs through a network connection, which can be connected to any Dante audio in the network .
● Two-channel SPK signal main output
Provides two linear output interfaces. All input signals are processed and mixed for output, which is usually used for external power amplifiers or active speakers.
● Two-channel AEC signal output
Provides two linear AEC signal output interfaces, which are usually output to interactive and distance teaching equipment. Full-band adaptive echo cancellation.
● Two-channel LINE signal output
Provides two linear output interfaces to automatically suppress the noise of two MIC input signals, and simultaneously mixes two LINE signals and two Dante signals for common output.
● Four-channel Dante signal output
Provides four Dante signal mixed outputs, which can be transmitted to any Dante device through the network to achieve IP management and interconnection.
● Six plus one network connection port
Provides six network switch ports, supports PoE power supply, 10 / 100M adaptive, single port maximum power 30W, and provides four-way Dante signal. One network link port for connecting other network switches.
● Plug and play, easy to operate
Pre-set scenes can be opened with one click, plug and play, strong versatility, flexible and convenient deployment, greatly reducing the difficulty and cost of engineering wiring.
Features:
The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.
The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.
The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.
The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.
D-8 is a desktop microphone base with Dante function. It is suitable for quick installation of any XLRM Cannon head output gooseneck microphone. The microphone base is equipped with a capacitive induction tact switch and is equipped with a red / green LED indicator. . In local mode, the user can switch the microphone to mute or speak. You can set the real-time and mute audio switching between the repetitive switching (latch on / off) between speech and mute; or preset mute and only press the button. Speak at any time (jog to speak), or preset to speak and only mute when pressed (jog to mute). The microphone holder is made of heavy-duty die-casting technology, and a silicone sponge pad is installed at the bottom to reduce the noise caused by table vibration. Inconspicuous design and matte black coating can enhance the concealment when used in serious occasions. The microphone holder is designed for flat placement applications, providing high-quality radio applications such as high-quality radio, conferences, and distance education.
The BR-108B network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.
The digitally guided full-frequency sound column adopts a multi-channel high-current digital power amplifier with advanced dedicated coaxial transducers, and each transducer is equipped with a high-frequency array of three tweeters. "Array in an array" three tweeter designs shorten the distance between high-frequency sources, thereby greatly improving high-frequency performance through a continuous and wide horizontal distribution.
As long as it is simple and directly connected to the network, multi-channel digital audio transmission, user-controlled DSP, user-selectable presets, and comprehensive remote system management control can be achieved , and all use standard Ethernet hardware and cables.
With computer remote control, audio system technicians can make settings that cover almost all audience areas. Multiple beams can be set one by one, and a software-controlled DSP is designed to separate them from a single array: up to 4 beams. The acoustic center of the array can also be raised or lowered because all array elements are identical and equidistant. Suitable for large lecture halls, stadiums, theaters, etc.
The LA-218L compact line array module with built-in amplifier has two high-energy 18-inch ultra-low frequency units with continuous directional coverage. Designed for simple system construction, it can provide the best listening experience in the shortest time. And the entire series is fully integrated with Dante. With the speaker as a system carrier, it has fully integrated the functions of signal transmission, processing, power amplification and remote monitoring. It has abandoned a large number of physical equipment such as power amplifiers and peripheral processing equipment, and has realized network transmission, IT processing, and intelligent operation.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
Activation instructions:
