Cart
← Back to Product Catalog

Powersoft – Duecanali 6404 DSP+D

Amplifiers

More details

Similar Products

ENNE_ED2-250
  • ENNE

ED2-250

The ED Series is a new digital amplifier launched by ENNE which has built-in high-accuracy DSP built-in router , supporting UDP and network monitoring. Supporting AES3 digital audio and Dante™ digital audio transport(only for models with Dante™),supporting Dante™/Analog automatic backup supporting both low-z and high-z output.
    Amplifiers
See the product
ashly-nXp-4002_600px|ashly-nXp-4002_600px
  • Ashly Audio

Ashly – nXp4002d

The nXp4002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product
asystems-dmp8800
  • Asystems

Asystems – DMP8800D

Asystems introduces the DMP8800D, a unique 8-in x 8-out digital matrix processor that boasts ‘simple integration’ to your existing system. The DMP8800D is built from the ground up on a powerful, open platform. This digital matrix processor transcends all limitations in scope, performance, and usability that tend to mar other network audio control systems.

Essentially, the DMP8800D software provides a means to achieve your project’s goals, regardless of the requirements. Rock-solid performance is backed by brilliant processing that is sure to enhance any audio you may throw at it. All of this combines to make the DMP8800 an ideal solution for boardrooms, conferences, convention centers, houses of worship, legislative installations, performing arts, stadiums and arenas, theme parks and transportation facilities.

https://www.asystems-sys.com/index.php/products/audio-switcher/digital-matrix-processors/dmp8800

    Amplifiers
See the product