Cart
← Back to Product Catalog

AtlasIED – DNA 7814DH

Amplifiers

More details

Similar Products

Kevic_-_MA3224
  • Kevic

Kevic – MA3224

The Kevic MA3224 is a Dante Digital Power Amplifier. The Kevic MA3224 is a Dante Digital Power Amplifier. Features:
  • Inout Channels:2XLR Balance with Link - Ouputs
  • Rated Output Power :2 X 1200Watts 4 ohms
  • Power Band Width:10Hz-28KHz
  • Input Sensitivity:+4dBu(1.2Vrms)
  • THD at Rated Power: 0.05%
  • CrossTalk : Less Than 80dB
  • Signal to Noise Ratio: more than 104dB
  • Network audio Format : Dante BK2
  • Demansions,mm:482 x 88 x 432
  • Weight : 15Kg
    Amplifiers
See the product
CMX - Power amplifier with DSP & Dante
  • CMX

CMX – DSP-4350

The CMX DSP-4350 is a power amplifier with DSP and Dante.

  • 4 x 60W power amplifier
  • 100V, 70V, 4 Ohm & 8 Ohm output with selectors
  • Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
  • Dante network control with 4 In 4 Out matrix
  • Two Ethernet RJ-45 network connector for both Dante and DSP configure
  • Remote GPIO for failure outputs
  • 1U height 19” rack mount type power amplifier
  • Balanced line input by phoenix connector for four channels.
  • Each four inputs with separate gain control.
  • Separate four channel indicators for protection, clip, input and output.
  • Complete short circuit, overload, high temp, clip and DC protection.
  • Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
    Amplifiers
See the product
Ashly_-_nXe_754
  • Ashly Audio

Ashly – nXe754bd

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
    Amplifiers
  • Dante Ch: 32x32
  • 16-bit, 24-bit, 32-bit
See the product