The Connect Series 84D is a 4-channel amplifier with 80 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 84D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.
Then there’s the Cloud…DANTE CONNECT SERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. Register for your free LEA Cloud account at leaprofessional.cloud
The DANTE CONNECT SERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.
The AVN-AO16R audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
The AVN-AIO8R audio converter and interface converts up to eight analogue inputs and eight analogue outputs to and from the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
The AVN-AI16R audio converter and interface converts up to sixteen analogue inputs to the Dante Audio-over-IP networking standard. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue inputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
The AVN-AI16 audio converter and interface converts up to sixteen analogue inputs to the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All analogue inputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
The AVN-AESIO8R audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate.
Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock.
The AVN-AESIO8 audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate.
This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).
All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock.
The SCD1010 is a cost effective Dante Commentary box supporting one commentator. Network connection may be fibre or copper and it has full network redundancy. Microphone amplifier gain and many other adjustments such as phantom power and limit levels may be controlled remotely via the SCD1010's web server. In addition to the commentary box functions there is a built in Dante breakout box with three analogue inputs and six analogue outputs. These inputs and outputs have level controls and may be assigned to local commentary box or network functions, the SCD1010 may even be used as a standalone analogue unit. The SCD1010 can operate at sample rates of 48kHz and 96kHz and may be powered 240V mains, 12 volt or PoE.
The B-DF4 is a network four channel four wire unit in a compact aluminium beltpack enclosure. With four audio inputs and four audio outputs it will meet the most demanding beltpack requirements. The B-DF4 has a built in speaker so may be used as a handy four wire box. B-DF4 front The talk buttons can be programmed to operate push to talk, latching or 'smart' (tap to latch, push to talk). When selected to talk the buttons illuminate red. Listen input(s) may be enabled/disabled in conjunction with the listen select switch. Buttons may be set to flash on incoming audio. Programming the B-DF4 is simple using the OLED display which also shows line input and output levels during normal operation.Power may be supplied Power over ethernet (PoE) or a 9-16 volt external DC supply.
The Q-SYS NV-32-H (Core Capable) is a multipurpose, software-configurable video endpoint native to the Q-SYS Ecosystem, offering two distinct operating modes to choose between, based on the needs of the application. ‘Core Mode’ enables a consolidated Q-SYS AV processor, control engine, and local 3 x 2 HDMI video switcher to support video collaboration in small and medium-sized meeting rooms and classrooms. It features 32 x 32 network audio channel capacity, eight channels of software-based AEC, along with onboard audio I/O via HDMI, USB and 3.5 mm. ‘Peripheral Mode’ allows native HDMI and audio distribution without additional control processors, bridges or complicated programming. The NV-32-H (Core Capable) also lets you integrate Q-SYS video cameras and audio via USB into all major UC&C conferencing applications. Like all Q-SYS devices, the NV-32-H (Core Capable) offers native integration and control, simplifying setup, configuration and firmware management while eliminating the need for advanced programming knowledge.
The Model 5482 Dante Bridge provides a high-performance means of interconnecting ("bridging") Dante audio-over-Ethernet channels associated with two independent local-area-networks (LANs) or Dante domains. The unit is compatible with the Dante Domain Manager™ (DDM) software application and is complaint with the AES67 technical standard. The Model 5482 allows up to 64 audio channels to pass in each direction. Internal sample rate conversion (SRC) capability provides sample rate, bit-depth, and timing conversion to ensure that audio signal integrity is maintained.
Create a unique selling proposition and differentiate your product with rapid and flexible customization. MONISMS MDS-LAN solutions are customizable in all areas including hardware, firmware, software and user interfaces through product development kits allowing you to create a unique selling proposition for your customers. Quickly give your products the freedom and power to perform across markets with our embedded live audio networking DANTE/AES67 modules, chips and software solutions.
MONISMS audio modules is Dante to I2S and I2S to Dante, Which can be easy integrated into your products. At the same time, we can provided Dante Audio PCBA design ( Supply professional high-quality ADC, DAC, DSP, AMP, Speaker and Microphone) , Accept OEM/ODM
Create a unique selling proposition and differentiate your product with rapid and flexible customization. MONISMS MDS-LAN solutions are customizable in all areas including hardware, firmware, software and user interfaces through product development kits allowing you to create a unique selling proposition for your customers. Quickly give your products the freedom and power to perform across markets with our embedded live audio networking DANTE/AES67 modules, chips and software solutions.
MONISMS audio modules is Dante to I2S and I2S to Dante, Which can be easy integrated into your products. At the same time, we can provided Dante Audio PCBA design ( Supply professional high-quality ADC, DAC, DSP, AMP, Speaker and Microphone) , Accept OEM/ODM
Create a unique selling proposition and differentiate your product with rapid and flexible customization. MONISMS MDS-LAN solutions are customizable in all areas including hardware, firmware, software and user interfaces through product development kits allowing you to create a unique selling proposition for your customers. Quickly give your products the freedom and power to perform across markets with our embedded live audio networking DANTE/AES67 modules, chips and software solutions.
The Extron NetPA U 8001 SUB is an ENERGY STAR qualified subwoofer amplifier that delivers 800 watts in a half rack, 1U, plenum rated enclosure. Dante Domain Manager and AES67 support ensure wide compatibility with enterprise configurations and other network audio devices. With its integrated DSP for essential processing, frequency range optimized for subwoofers from 20 Hz to 1 kHz, the NetPA U 8001 SUB amplifier is the perfect companion to the Extron SF 10C SUB subwoofer. This powerful combination meets the requirements of complex, decentralized systems with a complete space-saving solution.
The Extron NetPA U 2002 SB is an ENERGY STAR qualified, Dante-enabled audio power amplifier with flexible outputs that can drive 8 ohm, 4 ohm, 70 volt, or 100 volt loads in a half rack, convection cooled, plenum rated enclosure that includes rack mount hardware. The bridgeable outputs can deliver two 200 watt channels into low impedance systems or one 400 watt channel into low or high impedance systems. Onboard audio DSP includes a 6x6 mix matrix, filters, and dynamics. Four mic/line inputs and two line outputs can be utilized as Dante endpoints or as additional inputs to the onboard DSP. System monitoring via the Dante connection includes detailed amplifier status.
OG-DANTE-12GAM is a new high density, openGear-compatible solution for bridging 12G/6G/3G SDI sources with embedded audio to and from the Dante audio ecosystem. Dante audio networking provides digital audio distribution over IP networks, supporting uncompressed, multi-channel, low latency, high-resolution audio, with scalability, simplified wiring, and easy installation. OG-DANTE-12GAM provides a high-density infrastructure solution bridging Dante to SDI and back, ideal for stadiums, theaters, concerts, stage rentals, houses of worship, universities, and other production environments. OG-DANTE-12GAM features industry-wide compatibility with openGear frames, allowing for up to 640 channels of SDI/Dante audio bridging within a single 2RU frame housing 10 cards.
OG-DANTE-12GAM features include:
Support for 12G/6G/3G SDI embedded audio to and from the Dante audio ecosystem Dual, and independent 12G-SDI, (2x Inputs and 2x Outputs), each supporting 16 embedded audio channels, totaling 64 channels per card in a compact design Compatibility with openGear frames from AJA and third-parties High density and small form factor, enabling 10 cards to be utilized in a single openGear frame for up to 640 channels of SDI/Dante audio bridging Ross DashBoard control software support for remote signal status and configuration, on Windows, macOS and Linux Support for Dante Controller software Industry-leading five year warranty
Introducing the Q-SYS Core 8 Flex and Q-SYS Core Nano audio, video and control (AV&C) processors by QSC, which extend the applications of the Q-SYS Ecosystem into a wider range of smaller-scale installations across corporate, higher education, healthcare and beyond. Built on the same foundational technology as the rest of the Q-SYS processor portfolio including the best-in-class Q-SYS Core 110f, these processors are designed for applications with lower network channel capacity and/or targeted processing requirements.
Core 8 Flex offers onboard analog audio I/O PLUS network AV&C processing, while Core Nano offers a purely network AV&C processing (and addresses the wide-spread adoption of network peripherals and centralized topology). Both processors can process and route up to 64x64 network channels and include 8 x 8 channels of software-based Dante (with the option to license up 32 x 32 Dante channels.)
Introducing the Q-SYS Core 8 Flex and Q-SYS Core Nano audio, video and control (AV&C) processors by QSC, which extend the applications of the Q-SYS Ecosystem into a wider range of smaller-scale installations across corporate, higher education, healthcare and beyond. Built on the same foundational technology as the rest of the Q-SYS processor portfolio including the best-in-class Q-SYS Core 110f, these processors are designed for applications with lower network channel capacity and/or targeted processing requirements.
Core 8 Flex offers onboard analog audio I/O PLUS network AV&C processing, while Core Nano offers a purely network AV&C processing (and addresses the wide-spread adoption of network peripherals and centralized topology). Both processors can process and route up to 64x64 network channels and include 8 x 8 channels of software-based Dante (with the option to license up 32 x 32 Dante channels.)
The JOKER is a three-commentator unit. It includes all the features needed for sports commentators, such as making the antenna, sends and returns as well as monitoring talkback individually configurable.
The JOKER has an IP port and an embedded web server. This allows both the specific programming of the equipment in controls and secondly to take control of remote commands, without specific software.
• Three microphones inputs on balanced XLR, two commentators and a guest, with a phantom power supply 12 or 48 volts. • “HELP MODE“ for talking to support engineer. • Luminous ON AIR switches for the three inputs. • Luminous switch to send Talback A and B for commentators 1 and 2 inputs. • ON AIR output is muted when one of the talkback switch is pressed. • The JOKER offers inputs/outputs (GPI/GPO) on a Sub-D 15 pin connector. • IP mode even allows use in stand-alone.
The AVB-D16 bridges AVB and Dante networks allowing up to 16 channels to be sent to and from each network protocol; built-in Asynchronous Sample Rate Conversion ensures precision clock isolation between networks; easily patch up to 16 audio sources on your StudioLive Series III ecosystem products to a Dante network and vice versa.
The PRT666D is a multifunctional microphone desk with Dante connectivity. It has been studied to answer many uses in mobile or permanent installation. It includes:
• A microphone preamp with very low noise, adjustment of the sensitivity and 12 or 48 Volts phantom power. • An ON / OFF switch for setting ON AIR with a loop confirmation on GPO opto Mos. • An external switching for ON / AIR by GPI. • Two switches Talkback 1 and 2 with a confirmation loop on GPO opto coupler.
The communication is provided by an RJ45 network cable, conveying both the audio information and the power supply (PoE). The PRT666D has a DANTE Primary port and a DANTE Secondary port (Backup).
Applications: • Commentator desk • Remote reporter desk in an outdoor event. • Antenna simultaneous translation console.
The PCS310 is a built-in headphone amplifier with DANTE connectivity.
Communication is via an RJ45 network cable, carrying both audio information and power (PoE). The headphone output is on the front panel. The PCS310 manages 2 DANTE audio channels as input: • The left channel for the headphone amplifier. • The right channel for the headphone amplifier.
Applications: PCS310 is very useful in the "SPEAK" studios as the presenter and his guests need reception headphones.
The PRF75D is an active headphone amplifier, because of its design this active headphone amplifier is very easily integrable under the studio furniture, without making cuts on the board.
- Communication is provided by an RJ45 network cable, with both audio information and power (PoE)
- The PRF75 D manages 5 DANTE audio channels as input:
• The left channel for the headphone amplifier • The right channel for the headphone amplifier • The left channel for audio monitor output • The right channel for audio monitor output • The Talkback channel for talkbacks to headphones
- PRF75D is equipped with DANTE Primary port and DANTE Secondary port (Back up).
- The headphone output can be done on the front panel as well as on the rear panel for a possible deporting of the headphones.
- Monitor output allows you to connect a pair of monitor active speakers
The SNA DANTE is a sound level limiter system for large music hall and nightclubs. it is the first sound level limiter on the market that integrates this technology.
The sound level pressure is measured by the acoustic sensor, then it is transmitted to the processor that integrates music peaks with a very gentle slope, and adjustable rise time and fall time, thus no limitation degrades the signal dynamics like a traditional compressor.
Selection of the A and/or C weighting for sound analysis.
An Embedded Web Server allows consulting the sound level history and equipment setting. The memory is dimensioned to store the values of acoustic pressure 24 hours a day and 7 days a week, for 6 months.
USB Host for connecting a USB stick for collecting history.
8 audio channels could be processed simultaneously
Acoustic and electric Auto-verification of the measuring sensor.
The Livemix LM-DANTE-EXP2 is a user installable option card for the MIX-16 and MIX-32. This input option card is for connecting to your Dante digital network. Audinate’s Dante technology is a widely accepted and highly reliable standard for networked audio, especially in live and studio sound applications.
When using the Dante input option card (LM-DANTE-EXP2), the Livemix system integrates seamlessly into a Dante network. All the network subscriptions can be made using the touchscreen on the Livemix CS-SOLO or CS-DUO for quick and easy setup. Channels can be setup with a single “Import 1-24” button or each channel can be individually subscribed across multiple devices. Using the Import Names feature, channel names can be assigned to the Livemix channels.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
