Kingray - IF02_E2

Kingray – IF02_E2

Product Information

IF02_E2 is converted module with Dante audio in and analog audio out(balanced) , including single RJ45 and double RJ45, which can easily integrate power amplifier and active speaker into Dante audio network.

*E2 double network interface

*2 channel Dante network digital input, 2 channel analog output

*DC supply:±12V、+5V, +5V maximum operating current：400mA

*sample frequency 24bit-48k/96

*support PCM16、PCM24、PCM32 kinds of code

PureLink – MAX-AI-DA

The MAX-AI-DA is a Dante™ Audio with HDMI 2.0 ports input card for Media Axis™ supporting 4K/60 4:4:4 resolutions and Dante™/AES67 IP audio. Each MAX-AI-DA has primary and secondary RJ-45 ports for IP audio, four HDMI ports, and four stereo unbalanced analog ports. Media Axis is the world's only 4K60 cross platform, multi frame size matrix system with Dante and AV over IP connectivity.

Dante Interface Cards

See the product

Yamaha

Yamaha – Dante-MY16-AUD2

The Dante-MY16-AUD2 is a fully compatible Yamaha Mini-YGDAI card that instantly Dante-enables your Yamaha mixer, processor, interface or power amp. The Dante-MY16-AUD2 is a fully compatible Yamaha Mini-YGDAI card that instantly Dante-enables your Yamaha mixer, processor, interface or power amp. Add up to 32 (16x16) channels at 44.1kHz or 48kHz, or 16 (8x8) channels at 88.2kHz or 96kHz, with each Dante-MY16-AUD2 card you install, with full Dante network audio redundancy over Gigabit Ethernet. Compatible with a range of digital mixing consoles, processors and power amps equipped with MY16-interface compatible card slots, including:

Digital Mixers: CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i
Interfaces: RSio64-D
Processors: MRX7-D, MTX5-D, DME24N, DME64N
Power Amps: Tx4n, Tx5n, Tx6n

Dante Interface Cards

Dante Ch: 16x16
16-bit, 24-bit, 32-bit

See the product

Electro Voice

Electro-Voice – RCM-28

The RCM-28 is a dual-channel digital control module with DSP processing capability equivalent to one channel of the Electro-Voice Dx46 system processor. With an RCM-28 module installed, a Tour Grade amplifier’s network and system parameters can be completely supervised and controlled remotely through IRIS-Net. The RCM-28 remote control module is the first EV product to support the new OMNEO media networking architecture. Tour Grade series amplifiers (such as the TG5 and TG7) with RCM-28 modules installed can be integrated into OMNEO networks of up to 100 other devices that operate over standard Ethernet with standardized protocols.

Dante Interface Cards

Dante Ch: 2x3
24-bit

See the product

Kingray – IF02_E2

Product Information

Similar Products

PureLink – MAX-AI-DA

Yamaha – Dante-MY16-AUD2

Electro-Voice – RCM-28

Stay connected to Dante

Support

Company

Dante Networking Alliance