Cart
← Back to Product Catalog

Electro-Voice – RCM-28

Dante Interface Cards

More details

Similar Products

wohler
  • Wohler

Wohler – OPT-DANTE (12G)

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

    Dante Interface Cards
See the product
  • RDL

RDL RN22

RDL has released a line of five single-gang Dante interfaces. The D Series-RN22 and D Series-RN2ML are 2x2 wall-mounted, bidirectional mic/line Dante interfaces, the D Series-RN12 is a 1x2 wall-mounted, bidirectional mic/line Dante interface and the D Series-RN02 is a 0x2 wall-mounted Dante interface. The fifth model – the D Series-BTN21 wall-mounted Bluetooth Dante interface – will be released soon. The models come with a variety of features that are said to help with installation and configuration, including network control of gain, attenuation, phantom power and channel summing, and additional rear-panel inputs and outputs on detachable wiring blocks. The units are available in multiple finishes including black, white and stainless steel. Custom labels can be created and ordered online, and the interfaces fit a standard US single-gang electrical box or can be used with the RDL EP-1 adapter for mounting in EU/UK back boxes. To support the Dante interfaces, the manufacturer has also added two network remote controls: the D-NMC1R and D-NLC1R. These single-gang wall-mounted controllers allow end users to control a wide range of parameters using a simple rotary knob, including volume, presets, muting and Bluetooth settings. Visual feedback is provided through LEDs on the D-NLC1R or an integrated full-colour LCD display on the D-NMC1R.
    Dante Interface Cards
See the product
Bose_-_PowerMatch_Dante|Bose_-_PowerMatch_Dante
  • Bose Professional

Bose – PowerMatch Dante

The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations. The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations. The Dante network card is installed into the digital expansion slot of the amplifier and includes a primary and secondary Gigabit Ethernet port. The secondary port can be configured for switched (default), redundant, or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
    Dante Interface Cards
See the product